Jump to content

Bump Everytime You Buy Something New


blucavvy

Recommended Posts

I've been waiting quite some time for Provape to update the feature set of their high quality device but it appears that they're content to let the Provari achieve high quality dinosaur status. So I just pulled the trigger on a SvoeMesto Semovar SM V3

http://shop.vaperev.com/devices/semovar-mod.html

from Vaperev. Can't wait.

Sharp looking. Let us know how it performs?

Link to comment
Share on other sites

It's hard to fault the Provari..

This menu would drive me insane tho..

When an atomizer is attached

  • 3 presses- “ON” - Will turn on

  • 4 presses- “dn” - Set your voltage/wattage down.

  • 5 presses- “UP” - Set your voltage/wattage up.

  • 6 presses- “rA” - Check the resistance of your atomizer.

  • 7 presses- “Ub” - Display remaining battery life in volts (4.2v fully charged, 3.2v dead). Can also be used to check your voltage under load.

When an atomizer is not attached -

  • 6 presses- “SP” - Set power. You are able to increase the wattage at .2w increments, and .5w increments from 10w - 15w (Will display as “10” if at 10w, or “10.” if at 10.5w)

  • 7 presses- “SU” - Set voltage. Increases voltage in increments of .1v.

  • 8 presses- “rA” - Check the resistance of your atomizer.

  • 9 presses- “Ub” - Display remaining battery life in volts (4.2v fully charged, 3.2v dead). Can also be used to check your voltage under load.

  • 10 presses- “Sd” - Set display. You can change the intensity of the LED.

  • 11 presses- “SL” - Set LED. Here you can change which LED (Button or display, both, or none) will light up when vaping.

  • 12 presses- “H “ - Vape timer / vape timer reset. First screen is hours, second screen is minutes. If you push the button a second time, you will see “CL”. This will reset the counter if you press the button again.

  • 13 presses- “Fr” - Firmware version. This will show which firmware is currently installed in the device.

Link to comment
Share on other sites

Add to cart, lol

Should be "back up the Brinks" lol

That thing shouldn't be thrown in a cart. It needs to be escorted on a satin pillow to a Rolls-Royce.
Link to comment
Share on other sites

There is a mod made by Otto called the gear mod that's actually got gears carved out of the mod and it's 3,000 smacks. It's freaking awesome.

http://shop.vaperev.com/ottocarter/otto-carter-engraved-brass-gear-mod.html

There you go. Feast your eyes on that beauty. Wish I had enough to own one of those... It would go in a bullet proof glass showcase for sure. It's more expensive then my custom made schecter guitar! I even have custom wound pickups in that bad boy.... I only paid 1700 out the door for it.

Link to comment
Share on other sites

There is a mod made by Otto called the gear mod that's actually got gears carved out of the mod and it's 3,000 smacks. It's freaking awesome.

http://shop.vaperev.com/ottocarter/otto-carter-engraved-brass-gear-mod.html

There you go. Feast your eyes on that beauty. Wish I had enough to own one of those... It would go in a bullet proof glass showcase for sure. It's more expensive then my custom made schecter guitar! I even have custom wound pickups in that bad boy.... I only paid 1700 out the door for it.

Yeah, I don't think I'll be getting one those anytime soon.

Link to comment
Share on other sites

There is a mod made by Otto called the gear mod that's actually got gears carved out of the mod and it's 3,000 smacks. It's freaking awesome.

http://shop.vaperev.com/ottocarter/otto-carter-engraved-brass-gear-mod.html

There you go. Feast your eyes on that beauty. Wish I had enough to own one of those... It would go in a bullet proof glass showcase for sure. It's more expensive then my custom made schecter guitar! I even have custom wound pickups in that bad boy.... I only paid 1700 out the door for it.

Nice work... but I paid much less for my last car!

Link to comment
Share on other sites

I'd be afraid to use it.

Okay, today, I have to send the Sigelei back. So, on the shopping list over the weekend (hopefully), well, first I have to call them. I had my order in my cart already, for the 8 nic and the 18 nic, and changed my mind and decided I would just get a 30 ml of the 18 nic, and for some reason, I can only get one 15 ml bottle, it won't let me order two 15 ml bottles, or one 30 ml bottle, so, for something like the third day in a row, I need to call them for information. They may not be a good source if this is their policy (yet their website DOES list 30 ml bottles as selectable, it's just after you select it that it tells you that you essentially, can't select it. Of course, if I decide to combine the 8 mg nic and the 15 mg of nic, that would take care of needing to buy 30 mg of the flavor, because 15 of each flavor is 30 (ha, I can math!).

Going to Better Vapes either today or tomorrow. If I should decide (and after looking at finances as we having a major purchase being made today) to get the two different nic levels of what I order from Vapor Beast, I'll get 2 30 ml bottles so I can just add the two 15 ml bottles in. If I don't get the two different nic levels, I'll have to decide if I'm going to get the "easier to use" bottles (depending on my hands) for my existing flavors which are NOT in dropper bottles (depending on how much they charge per bottle, I could easily spend a good fraction of money right there, but I'm prioritzing my flavors based on what's used RIGHT NOW, just as I'm doing with my tanks.)

There is a bit of the "No Joy in Mudville" feeling right now, as hubby says I PROBABLY can't get a Twist or other cheap VV financially right now as a sub between now and the time DV either credits my account, we order what I'm going to get, and it gets here (or they get the SVD back in stock, if that's what I decide on, and I can order it and it gets here). And I understand that, I really, REALLY do. Bad time of year, class ring is being bought um, today, plus household bills for the month.....and we need to try to save up for the month that REALLY hurts, December. Both teenagers' birthdays are within a week and a half of Christmas, plus another family birthday that BECAUSE of the close relation, we try to do an actual b-day gift instead of just a card (two days before the oldest's birthday, coincidentally). It just BITES going back down to non VV.

BUT, I'm planning on getting either 50/50 regular 618 blend or 70/30 (the maximum flavor boost was bleh to me, and as long as the regular blend with no flavor boost tastes okay to me, I'll go with that, because I miss my 618). I REALLY think this is still related to "seizure-gate" on the 10th of last month, because I think it may be that I'm not tasting all of the flavors, and that's why on the increased batches, it's come down to me ONLY tasting, essentially, tobacco flavoring, but I don't think I had that problem when I tasted the sample at the store, which was without flavor boost. I won't get a glass/eye dropper bottle on that until I'm sure that's what I'm going to be able to stick with, and I'm still not sure if I'll need the 50/50 or the 70/30. I'm just trying out an 11 ml bottle.

I'm not sure if I'm going to pick up a bottle to do my combining of my honey wood/turkish honey in there, or keep doing my....well, a dash of this one a dash of that one in the tank itself. Probably the latter, because I haven't really figured out the proper proportions of which flavor to which flavor, and some days I prefer more honey wood, and some days I prefer more Turkish Honey tobacco.

I plan on picking up a mini davide to try. Granted, the full sized Davide's draw is a little more airy than the KPT 2, so I think the KPT2 will be the one I will stick with for my full sized bottles, the mini PT, either original or version 2, are just too small to suit my needs for the smaller sized bottles - so they are definitely going to end up relegated to the "sample only" pile.

Going to end up picking up a pack of replacement kanger coils, too. Since I'm switching flavors out of tanks in the past couple of days, and although I vodka soak them - I don't know how long the used ones are going to keep lasting, and I only have 4 brand new ones left.

Link to comment
Share on other sites

I bought my first ever RDA. I wanted to give it a shot so I only went with the octupus ($8 at a local B&M) grabbed some 32g Kenthal and I have some cotton at home for wicks.

Don't be getting too excited.. It's a real pain in the ***... The drip cover constantly falls off so be careful if you take it with you.. there is a trident clone Rda that is 10 times better and about 5 bucks more..
Link to comment
Share on other sites

My octopus is fine and vapes like a freight train. Easy to rebuild too. The flavor is awesome. 1.6 ohms on a spinner.
You're a brave person vaping Rda on a spinner.. Build a coil with the wrong ohms, goodbye spinner.. it does vape great but I only used it at home I tried taking it somewhere with failed success. Edited by thvapor
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines