Leaderboard

This reminds me back when I was a kid I had a Boston terrier pit bull mix. Well I would fart on her guess she got sick of it and one night in almost asleep and feel something tickle me noise. She back her as*hole straight up to me noise and let one rip. Needless to say I never farted on her again lol

Of course I am serious and stop calling me Shirley!

If she gets a treat that's "too big" in her opinion, she goes and drops it into her toy box where it will petrify until she's ready for it. She hates a bed that's just been made up. She will root under it until it looks like my SO and I had a really good time...

My Nome

I don't do b&ms anymore 95% of are full of dumbazz people with way overpriced gear.

Just got my batch of Peanut Butter Fudge Brownie in and you should rename it PBFB Crack! That is some good stuff my man, I can't put it down! Funny story though. Sitting at the desk, feet propped up and fired up the tank and suddenly got this awful smell when I started vaping. It smelled like raw sewage. I was going, "W-T-F?!" I thought I was going to toss my cookies, that's about the time I realized the dog was laying next to me and farted.

He got suckered

That is for bread ties only Earthling. LMAO

Well let's be honest here my dog fart comment made the whole train jump the track.

I think this is new record for going off topic. LMAO

And all this time you've been plucking nose hairs with them.... lol

LOL I think I would get some flack if I named it that. But.... I could make a special exception on what I send you. Oh Man That would send me out of the room. One of our dogs is bad for that, but he also belches like a sailor too.

Not sure if my order was "simple", or if they are getting their act together, but the order I placed on 1/9 is shipping today (only took 7 days, instead of their usual 12-15, lol). Now to wait another week for grandma to hand it off to the carrier pigeon who will fly it to the Philippines, where it will be handed off to sea-turtles, who will then deliver the package to South America via Panama Canal. The last leg of the journey should be quick, as I hear Juan has a new pack-mule and should be able to reach the US border by sometime this summer In all seriousness, my last Fasttech order was just over 5-weeks from order to delivery, but it did spend 5-days in Switzerland for some strange reason (I guess it needed a little vacation in a neutral country?), so I'm hoping (fingers-crossed) that they have stream-lined their shipping department just a tad, and maybe I'll have my order in another 2-3 weeks? Anyone else seen a faster delivery time from Fasttech lately? Or could I just be getting my hopes up because the package hit the outgoing mailbox a few days earlier than usual, lol?

Okay, I received my Kayfun V4 (AMOD Clone) today, and here's my initial impressions, and review after the first 6-hours with it.... Unboxing - The box, paperwork, even the "100% Genuine Svoemesto" seal make the clone look authentic. The only thing missing was the authentication scratch-off... that is, if the original even has one? The Kayfun looks beautiful! It is well machined, smooth lines and looks sexy. It is also HEAVY! The kit includes spare o-rings, screws, silver-plated spring, polycarbonate M-tank, REAL glass insert, and a couple of pre-wrapped 32ga coils over silica wick. They even included a key-chain screwdriver (instead of the crappy blue ones) Inspection - Machining of all parts is superb! All threads are clean and smooth. No sharp edges or rough-spots like typically found on clones. All o-rings are snug-fit, no burs, or irregularities. Initial Build - Even though this deck has 4 posts/screws, it is DESIGNED for SINGLE-COILS. The additional screws are to aid in mounting, using diagonal posts, to accommodate both clockwise and counter-clockwise wound coils. Yes, you can build dual-coils on it, but the deck is still small, so keep that in mind. I built a 28ga, 1.4 Ohm coil for my first build. There are warnings in the manual to not go below 1.0 Ohm, I assume because you could damage/melt the insulators? So, if you plan to try dual-coil, keep that in mind. I found my first issue with the deck screws... the heads are TINY, so I had some difficulty working the 28ga wire under the heads and getting them tight. Smaller wire may work better, but if you're planning to use 26 or larger gauge wire, you may want to invest in tiny washers? There is no top-chimney to attach, so you can wick the coil with the lower chimney/shield in place (kinda nice). Stuffing the cotton down onto the deck to cover the juice ports is much easier on the V4, because the entire deck is a tiny bit wider, and the ports are taller, so there is less depth to cover. Assembly of the tank is a breeze since there is one nut at the top, and you can get a good grip on the entire tank body to tighten things together. Insert the deck on the bottom and screw it snug. Here's the tricky part... closing the juice flow required the use of a tiny screwdriver inserted into one of the holes to use as a prybar to break it loose the first time... after that, it was much easier to work with. Now that it is closed, pop the screw portion which holds the drip-tip, and fill the tank. Re-attach the drip-tip section and open the juice flow... a few dry-drags on the tank, and the cotton is properly saturated (if you didn't pre-saturate). Out of the box, the air-flow control was wide-open, and after a couple of good hits on the tank (at 12W) I ended up with a dry hit and fried my cotton... NO PROBLEM... Turn it upside down, remove the deck, re-wick, re-attach the deck and you're ready to go again in 90-seconds. Try that with a full tank on an older Kayfun/Russian To adjust the air-flow, you have to remove the 510 connection pin... don't worry, it's not attached to the deck! Pop out the 510 pin (and insulator if your screwdriver is not small enough), and insert a tiny flat-head screwdriver... you'll find the air-flow control screw up there! Take a few drags on the tank while you adjust the screw... once you have it set where you want it, re-assemble the 510 connection pin (don't forget the insulator!!!). Conclusion - Overall, I give it 4.5 stars out of 5. I would like it if the juice-flow-control section had a better grip, but it is getting easier to work with, even after a few hours. I would also like the air-flow control screw to be more accessible, but once you set it where you want it, you'll likely not be needing to adjust very often. Flavor is exactly what you'd expect from a Kayfun/Russian style tank. I find little difference between the V4 and my Russian 91% when using the same juice, same Ohm coil, and same Wattage settings. So, no, there is no "wow factor"... I do like the adjustable 510 pin I do like the fact I can fill the tank without needing a screwdriver or needle-tip bottle I do like the fact I can turn off the juice-flow to eliminate leakage when not being used or being transported I do like the fact this tank does NOT whistle I do like the additional screws/posts on the build-deck to accommodate more than your standard coil builds I do love the fact I can get to the build-deck without having to drain the tank and make a mess Bottom line is that this RTA is a winner in my book, and if you are tired of dealing with tools to fill and adjust your older Kayfun/Russian RTA's, you may want to consider stepping up to this model. If you've been thinking about getting an RTA, but were on the fence because they are "hard to learn"... this RTA will change your mind quickly!

https://www.bestpriceecig.com/mechanical-mod/168-dovpo-safe-link.html Product Description: Vape and travel safe with Safelink. Prevent firing during storage, check resistance, and take control of your safety. Features: ◦10s Automatic vaping cut off ◦Short circuit protection--Mod is OK even if the atomizer short circuit ◦Low voltage hint and protection(<2.5V)--Protect the battery from damaging ◦Lowest resistance carrying:0.3ohm ◦26 MAX AMP output ◦Ohm and voltage checker built-in by voltage drop ◦Input voltage:3.0V-4.5V ◦It will show 9.9ohm when no atomizer on it

Wow, I've heard some strange things in my time on this planet... but that one is pretty far out there. Propylene Glycol is in toothpaste, mouthwash, soap, shampoo, deodorant, etc. etc. etc.... Vegetable Glycerine is a natural sweetener, found in thousands of foods we eat every day.... But just remember... water is the leading cause of drowning... and 100% of all deaths occur right here on Earth, because living is the #1 cause of death

I may have been to hasty in my reply. The correct answer is yes, it will rot your teeth but it will take 147 years.

You have now joined the ranks of the Twisted,

Astro glide....make a Cadillac fit in a dog house LMAO

Just a little bit of e-liquid. Speaking of lube, did you know that in some professions you have to be certified to use lube? When I first heard about it I about laughed myself silly. And then I went to administer the lube certification test to 10 guys who worked at a cement plant. The Lube Council pays its testing proctors very well... I kid you not, there really is such a thing as the Lube Council.

Nome at 2 weeks old In Catatude Training My Fishing Buddy

OMG, Airplane. Now I'm going to have to go watch that! It's such a hilarious classic and still great today.

Watching "Airplane" now. Roger roger....over Over, what's your vector Victor. Looks like I picked the wrong week to quit sniffing glue. Love this movie! Big Bang is on our DVR since season one and we love it. The Middle and Modern Family are a couple of my favorites too. We enjoyed How I Met Your Mother a lot too.

She's cute,Tam

Whhooo Hooo I can see again!

Holy crap he's half the size now! Here's mine now, such a clown

Yep. He's another earmuff with teeth. Just like Teni. Before bath and haircut doing her best impersonation of a miniature sheepdog instead of a Maltese: After getting chopped all to hell and back because she wouldn't stay still for even a second:

I bought the Amod clone from Code Vape and as usual for my luck, they've gone down in price to $24.95 The RTA is about as 1:1 as it can get, especially with the SS and glass sections. I've not tried the M-tank yet, so no clue on how it fits/performs. The spare-parts kit included at least one of every o-ring for rebuild, and the silver-plated contact spring, but oddly enough, no spare post screws... could have sworn those were included, but I just looked, and nope, not there...

Yeah he is seething with big dog attitude

Here's my pup..

I still have a few VTC 4s, but they are going fast. I only have 8 pair left.

I have found that having the gap does not allow the coil to vaporize the liquid as well. This allows the coil to clog up faster.

When my Maltese was a puppy she used to lay on my chest with her butt under my chin and let one rip. She's not allowed to do that anymore.

I've been known to derail a few topics but never to this degree. It's a whole new first.

I do the same Tam. But seems every time I install the coil it spreads a bit. That is why I heat and squeeze again after I install it.

You do get better results buy heating as you squeeze it. I don't have ceramic tips so I have to heat 3-4 times to do the same thing you could do 1-2 times with the ceramic tipped tweezers.

Never underestimate what a bottle of jamison and a 20 can cause lol

Farts could technically be classified as vapor lol

It's good in parts...Kingpin with Bill Murray and the hair is funnier, imo. 1. Kingpin 2. Me, Myself and Irene 3. Dumb and Dumber All very funny.

I like to fart in Pringle cans and seal them up for a rainy day

Good for you! Are you a vendor? The broken English in your post begs the question....

I admit I have a soft spot for the Farrelly brothers. They're from New England so they infuse a lot of our "culture" into their comedy. They also have local sports guys and local celebs in their movies all the time. "Kick his ***, Seabass!"...that's Cam Neely. Plus Kingpin is one of the funniest movies ever.

I'll trade him the car in his avatar for an answer!

Haha.... I read that as if you were asking for a date. LOL

Dumb and dumber to

Feed the cat sardines few days ago ..wow...farts stuck so bad I could taste it lol

That Kanger is going to look like a bobblehead on that CF MOD, ask or as they say here in the South, axe me how I know. When the mini comes out I think I'll get the red CF MOD to match the red O-rings. Yeah I'm at that point now where I'm color match my stuff. The wife called me 'metro' I told her to shut up and take off her white shoes, it's after Labor Day!

From Triangle Vape, I just bought an Aspire CF 18650 mod ($23), a Kanger Subtank ($39), two Sony VTC4 2100mah 30A batteries ($9 each), and an EFest SODA 2 Bay Charger ($10). Total shipped = $94.29 I had planned to pre-order the 22mm Kanger Subtank Mini to go on the Aspire mod, but decided I just couldn't wait for it to be released.

These >>>> ( . )( . )

Wow, 12 days is fast! I try to notice the "ships in XX days", but sometimes you can't avoid the additional 3-4 days of processing time. Exactly... I bought 9 items for <$15, and saved $75+ over buying the same thing from a US supplier... I can wait if I'm saving big bucks Which reminds me... I've looked at some items from Fasttech, and several other Chinese sellers, and I've noticed lately that a lot of the name-brand authentics and clones are actually priced the same, or MORE, than you can buy them in the US. It pays to shop around if you expect to save $$.