FXRich

I do sometimes get a batch that tastes bad and is unfixable so I dump it in a bottle labeled not so good. Awhile back I tried it and it tasted pretty good, so I dumped it in another bottle and vaped it. Started another not so good batch, every once in awhile I try it. I know I can't duplicate any of it but that's OK.

If the coil hit the deck it may cause a short. The biggest problem it may cause is it may heat the deck too much, and effect the insulator. That might be the reason they sell the insulator separately.  A new insulator is only 75 cents at sweet vapes. The only time I burnt the cotton right away is when I had the cotton too tight in the coil.

Some people lay a piece of cotton or other stuff on top of the coil when they rebuild KPT coils, which is a lot different than a subtank coil. Don't unbraid the Ekowool, it will do it by itself unless you heat treat it. What I mostly use Ekowool for when used in a subtank is I use it to rebuild the original horizontal coils. I have a couple of ST nano tanks that the RBA does not fit in, so I rebuild the stock coils which is very easy.

If you do try Ekowool make sure you get the stuff made in Poland, there is some cheap Chinese stuff out there that is bad stuff.

It will last longer if you just can keep sniffing it, and not vape it.

The problem I had with the Kanger RBA was that it had a .5 coil that was 2.5 mm inside diameter. I prefer a 3 mm id, it allows a little more room for the cotton. But if you are not into winding your own coils then you are stuck with the smaller coils. I get my RBA supplies from Lightning Vapes, They don't sell tanks they specialize in RBA supplies. They have cotton bacon and anything else related to rebuilding coils.

Looks really good, wonder how many Istick 50W it will hold?

I would not doubt that some US retailers sell Chinese juice, Some may even buy bulk, and rebottle it in smaller bottles. When a seller offers a choice of PG/VG ratios it is probably  juice mixed in the US. 

Sitting flush is important to me too. Last year I bought a Evic, the atomizer sat flush, a few months later I bought another one and the atomizer did not sit flush, they were both authentic so I couldn't blame it on one being a clone. Maybe I can just say one was made on a Monday.

I have tried some of them with no problems so far. Trustworthy to me means your CC info is safe and they have good customer service.

I actually already knew this, but was reminded of it this morning...
When the weather gets colder and your vaping in the car, be sure to crack the window so that you can see WHERE THE HELL YOU ARE GOING!! 

Grandpa always said... if you don't have something left over,  you didn't do it right

I got it to unscrew but didn't unscrew it, don't want to lose the ball. I'm good at taking things apart and not getting them back together right. Think I might just leave it alone. I always have spare parts when I put cars back together.

I don't think Kanger will stop making the KPT2 and 3 for quite some time, they are too popular, but I suppose some retailers might stop selling them. There is probably a smaller profit margin in them compared to all the different subtanks that are on the market, and that's what a lot of retailers look at, the bottom dollar is what counts. I use mostly my subtank minis but I also use my KPT2 everyday usually when I watch TV or on the internet, I don't need big clouds blocking my view.
 
The KPT2 is the VW bug of the vape world.

I don't think Kanger will stop making the KPT2 and 3 for quite some time, they are too popular, but I suppose some retailers might stop selling them. There is probably a smaller profit margin in them compared to all the different subtanks that are on the market, and that's what a lot of retailers look at, the bottom dollar is what counts. I use mostly my subtank minis but I also use my KPT2 everyday usually when I watch TV or on the internet, I don't need big clouds blocking my view.
 
The KPT2 is the VW bug of the vape world.

I like the subtank mini, you can use easy to find coils or you can use the RBA and make your own coils. Since I started using a subtank mini I haven't bought a coil for it.

I like the subtank mini, you can use easy to find coils or you can use the RBA and make your own coils. Since I started using a subtank mini I haven't bought a coil for it.

I like the subtank mini, you can use easy to find coils or you can use the RBA and make your own coils. Since I started using a subtank mini I haven't bought a coil for it.

About the only way vaping could be dangerous in a place like Yellowstone is if you had a bacon flavored vape and the bears smelled it.

I thought I might revive this for people who would like to share their favorite recipe.
 
I like what I call melon
1/3 watermelon 1/3 honeydew 1/3 cantaloupe I use FW flavors I use a total of 20% flavor but you can use whatever you want, Choose your own PG/VG ratio and nic level

First, she distracts me
"honey, fix my tank. It's not working for me"
"well when was the last time you changes  the coil?" 
"I don't know" (translation: 3 weeks)
"okay, let me fix you up". 
So while I'm putting anew coil in for her I hear this sound.  It's familiar in a strange kinda way....HEY WAIT A MINUTE! That's my rig firing!
the look in her eyes was priceless. She looks straight at me. "I want this", she says. 
Yep, next thing I'm building her a fresh coil in one of my sub tanks (translation: her new sub tank).  Fill it with her current favorite peach soda.  OMG, you should have seen her eyes glaze over.  Yeah, her tanks are history.  Classic.  

Tell her about the pink subtank nano, and tell her the subtank mini is made for men only. If that don't work do like Comp says and hide them.

Not only that but nicotine is a known insecticide, you might kill a few skeeters at a national park, that would be terrible.

About the only way vaping could be dangerous in a place like Yellowstone is if you had a bacon flavored vape and the bears smelled it.

I got it to unscrew but didn't unscrew it, don't want to lose the ball. I'm good at taking things apart and not getting them back together right. Think I might just leave it alone. I always have spare parts when I put cars back together.