tzymroz2013

Im a RYGUY4 type of guy myself.

I like cheesy tots.

The Waffle House makes great waffles!

My boss is driving me into "Immortal Madness".

I was travelling through the mid west once. I stopped and had coffee in Montana. The coffee was so thick and dark I called it "Montana Mud"

sorry Patricia I was not clear these are live shows you can watch on your computer on the internet, try this link http://vaughnlive.tv/novabroadcastings
you will then have to figure it out from there, you will create a profile, there is all kinds of live vape shows. you can also watch some prerecorded vape shows in archives but to be part of giveaways you will need to be logged in to live shows in the chat. If I can figure it out you can too, I am not very good with computer stuff but it is pretty self explanatory

facebooks groups just do a search on vapor, vaping etc. before you know it your facebook will become 90 per cent contest entrys,lol.

i love contest but I have learned lots from the shows and other peoples post. on facebook join vapor joes page it has some good prices on vape supplys not just fast tech but also good sales out there in vapeland. other suggestion is sign up for gotsmok.com newsletter for good sales going on as well. come on and join Vapers Helping Vapers information and no drama, you will love it.

I second that, it does make it fun even if I do not win. Patricia do you ever watch any of the vaping shows on Vaughntv or Novabroadcasting, most do giveaways, the biggest being Modenvy every Saturday at 10 pm until about 1 am. You just participate in chat or be sure you are signed in and they randomly select people to win juice, wick, wire or mods. It can be fun but other times it seems it is all give me give me, with some immature people also participating so at times I just tune it out but try to listen out for my name. I have mainly won juice and not the ever popular mods. you just create an account on nova or justin tv., you do not have to use your real name in chat as it lets you create an avatar much like on here there is also vaping watch though I have not caught any of their live shows.

Facebook is also full of contest but it seems hard to win on there too, if you have facebook you may want to join a couple of groups on there such as Marci Hollands contest group, my favorite group so far is Vapers helping vapers information and no drama, we have juice partys and other give aways from time to time, and you get to help others that are just starting. there is also a juice review section, come on over and hang out if you want,

I do have 1 or 2 flavors that I prefer unsteeped, voodoo Kitty is one, the licorice seems to go away after a while and that is mostly why I like that one, goes from tasting like good and plenty to grape creme.

What kind of boat you have?

Anyway I do not have anything really epic. I have jumped off the swim platform of my boat with my lanyard still on, but never hurt anything amazingly. My wife has done this several times, and nothing went wrong except the tank needing a good cleaning lol.

I have broken more stuff at home than on the boat, and that is opposite what I thought would happen. My wife broke the glass on a KPT on the boat letting it roll off the seat but other than that and jumping in the water with our lanyards around our neck nothing really epic has happened.

Going down tomorrow to drain my fresh water tanks, pump out the head one last time, and cover her up for my guy to come and winterize the engine, AC, and water system. I hate winter. I wish I lived somewhere where it is 84 for the high and 72 for the low 365 days a year!

Cool holder. The Home Depot model fits perfectly in the Jeep cup holder. About$4

No November contests? Common suppliers lets have some fun!

Here's Youde's latest take on rebuildable atomizers. It's an RBA that wicks from the center as opposed to one side, and from what I can tell from the online pics, it looks like it's going to be really easy to coil.



I haven't done a whole lot of research yet on who has the best deal on the AGA-T3, but I did find a limited number of them available at Discount Vapers for $49.50 ($52.43 shipped).

I get 50 ml for less than 15 every day, in flavors I love..that's nt a deal ....

Ok I am ready for a sequel, that was too good.

Ok I am ready for a sequel, that was too good.

Ok I am ready for a sequel, that was too good.

Wanted to share an awesome video i found on YouTube about zombies (cigarette smokers/gov. trying to ban ecigs) and vapers: http://www.youtube.com/watch?v=iLFieRWKPY4

Enjoy

"I'm gettin the fruit, and the crust" "Reminds me of childhood." Bahahaha.

Thanks for paving the way, compenstine! Nice job!

This was brought up in another thread, moding out a multimeter for testing atomizers. I had bought a Radio Shack Model: 22-182 Multimeter just for building coils and testing other E-cig needs. I promised a tutorial of what I did when I was done, well, here it is.

I started with a stock Radio Shack Model: 22-182 Multimeter



This Multimeter comes in its own case and is mounted with 2 screws into the case for changing the battery. I wanted to use the case it came in as it was very compact and is easy to store.

After some thought I decided to make a panel that would fit into where the test leads were stored. This would allow me to close the case lid and keep it all in one neat package. I found an old 5.25 black bay cover for a PC to make the panel. I used connectors I salvaged from dead 510 and 901 batteries and atomizes also some used wire from a old PC LED.



I wanted a tight fit for the panel so I made a template of the test lead storage plate from a piece of semi ridged clear plastic. Laying the plastic over the multimeter I traced out the shape I needed for my panel with a Sharpie. After cutting the template out, I traced it onto the 5.25 bay cover. I placed the template in the upper right corner of the bay cover. This would allow the downed edge to act as a stop and a support for the panel once in place. Using a Dremel I cut out the basic shape, leaving room to adjust it's shape to fit tight in the test lead storage area of the Multimeter. I used the Dremel with a sanding cylinder to shape it for clean fit. I used a 5/16th in drill bit to make the holes where the new leads would be mounted. This bit was a tad smaller than the atty and batt but, I wanted a tight fit. The 3/8ths bit was just a hair to large. I then took my Dremel and a small sanding cylinder to make the holes just the right size for them to fit nice an snug.



Note the holes are a little off I made a line to follow but the center punch moved a bit on the second hole from the top. Ooops lol

After that was all done and ready to go, I soldered the all the leads together. I did this before installing them into the panel so I wouldn't risk melting the plastic panel. Once soldered and mounted them into the panel. I did a test on all the new leads to make sure all had a good connection and they all worked. I did this by taking a base reading on 1 atty. Then using it with an adapter to test both the 510 and 901 atty leads. I then used 1 batt and did the same with the 510 and 901 batt leads. After it all tested a go, I then used 5min epoxy to glue the leads in place. I also added some to the wires so they would move and possibly break the solder joint. I want to be able to remove the panel when I want so the wires had to be secured. Once the epoxy had set, I retested the leads just to make sure all the leads were still working.



It was at this time that I cut the original leads from the multimeter making sure I left a little extra in case of a redo. I then soldered them to the leads of the panel. To protect the connection I used some shrink tubing on these connections.




Now it is time to pop in the panel and test it again.



It all tested good so there it is, a custom 510, 901 Atty and Batt tester. The space at the top allows me to add 4-5 adapters for testing other size attys, Batts or extending the lead up to test tanks that are to big around to fit directly on the 510 lead.




I Love DIY!

I have a friend in real life with your same name, first and last name, he lives about 5 minutes from me though. lol, I like the Veteran Vaper and need to order from him again soon myself.

Yeah, I was really excited when I saw that the mini KPT 2 came out.....but I wasn't thinking and didn't check the capacity, and had hubby pick one up at the b&m shop.....paid $20 for a 1 ml tank. That's the more than I paid at the same shop for my full sized Davide....yet they had no idea that there was a davide mini. I sent them a message letting them know they might want to look into them since they hold double what the KPT 2 mini does, so they would probably move more of them. They mark that stuff up by several dollars anyway (at least from Discount Vapers prices), so they'll make their profit. They also supposedly have a supplier on the replacement glass, but that supplier is always "out". Glad Wizard found an online supplier and posted it here.

Don't get me wrong, that B&M, Better Vapes, I can't fault them on their juices, or how much of a help they've been to me taste wise (well, the owner and his, I think it's his gf/SO or something), but on hardware, they really don't know more than what they get from their suppliers or outside of what their suppliers carry (the confused looks I got from most of the staff when I asked about the SVD last weekend when the owner was in the back), one of the clerks, it's her weekend job, I THINK she vapes, but I'm not positive, but I know more about steeping than she does, I know that, and her "day job" is a telephone representative for the water company. Another one - granted, he's not actually a sales clerk, he's not even trained on the tablet to ring people up, he spends all of his time in the back mixing juice - was TRYING to help me with information on the SVD, and I said it was made by the same people that make the MPV, and he looked at his MVP, and started trying to google iTaste SVD (when I told him Innoken, and he found it, basically his help was reading the information I already knew, and telling me it sounded just like the MVP, except it was round, and it sounded good - he even said to one of his co-workers, "hey look, it's got the battery warning just like the MVP does,"). I'll buy Evods and coils from them, or maybe if I want another full sized Davide (one) or if they start carrying the mini Davides and their price doesn't exceed the $12 I'd pay at DV + the shipping - or if I really needed one that day, but other than that, or empty easy fill bottles, I'll stick to getting juice from them.

Wow, and I so totally wandered around in this post it wasn't even funny!

I absolutely LOVE Space Jam!!! Just too damn expensive for something I can easily make myself (my buddy discovered that 8% tfa pomegranate + 7% tfa Blueberry in a 40/60 PG/VG base = Andromeda).

Speaking of DIY juice clones, I'm vaping my clone of Drake's Echelon (10% tfa marshmallow + 7% tfa pomegranate + 3% Ethyl Maltol in a 100% VG base). Damn close, and damn good!!!

SpaceJam ejuice the flavor I am vaping today is called Pluto (melon and bubblegum) I won entire line of 30 ml juices on facebook awhile back, this one is very good and the others taste good too but this one is in my primary tank today. you can find his juices at a couple of venders but also @ their own website @ www.spacejamjuice.com i would be willing to buy more -enuf said