Compenstine Posted June 5, 2014 Share Posted June 5, 2014 I bought a few of these today. They work really well for a cheap Atty holder. You can get them at Dollar Tree for $1ea. Tam and VaporTron 2 Link to comment Share on other sites More sharing options...
Tam Posted June 5, 2014 Share Posted June 5, 2014 Hey Tam did you see what item I put at the top of the list? Yes, I noticed it right off! You did good, Jerryjoe. That deserves a HUGE attaboy! jerryjoe 1 Link to comment Share on other sites More sharing options...
jerryjoe Posted June 5, 2014 Share Posted June 5, 2014 Where ya goin? Can you link me that three hour tour of coiling please (: I have seen some coil vids but none that long/detailed. I work on an oil rig in a section of the gulf of mexico called Eugene Island. About 100 miles of the coast of Louisiana. Here's the links to the videos. It's part 1-5. All tolled it's something like 2 hours and 48 minutes. https://www.youtube.com/watch?v=0mgNxfvg6OM https://www.youtube.com/watch?v=MHVQVW2Jbo4 https://www.youtube.com/watch?v=3lRxmrwZhmE https://www.youtube.com/watch?v=1WbbT4PIi2E https://www.youtube.com/watch?v=NWYl6Yhsu1I Hope you enjoy it. I did. Mike from madvapes isn't as kooky as rip tripper but the videos are packed with info for folks like me just starting out. VaporTron 1 Link to comment Share on other sites More sharing options...
jerryjoe Posted June 5, 2014 Share Posted June 5, 2014 This is where I work. Compenstine, Love2VapeDaily and VaporTron 3 Link to comment Share on other sites More sharing options...
VaporTron Posted June 5, 2014 Share Posted June 5, 2014 Thanks a lot, Yha riptripper is HILARIOUS but very informative, so is mike ive seen a couple of his reviews too Link to comment Share on other sites More sharing options...
VaporTron Posted June 5, 2014 Share Posted June 5, 2014 (edited) Very cool Joe! This is where I work Edited June 5, 2014 by VaporTron jerryjoe 1 Link to comment Share on other sites More sharing options...
VaporTron Posted June 5, 2014 Share Posted June 5, 2014 (edited) I just ordered my stuff! (Take note on the total lol) @tam (; And btw I test all my coils with a multi meter so I don't need a tester! Edited June 5, 2014 by VaporTron Link to comment Share on other sites More sharing options...
jerryjoe Posted June 5, 2014 Share Posted June 5, 2014 That sure is a pretty order you got there tron VaporTron 1 Link to comment Share on other sites More sharing options...
VaporTron Posted June 5, 2014 Share Posted June 5, 2014 I'm excitedThe total cost is 1 2 3 4 5 Link to comment Share on other sites More sharing options...
BigClouds1021 Posted June 6, 2014 Share Posted June 6, 2014 I'm excited The total cost is 1 2 3 4 5 That's actually pretty cool. It will probably never happen again. Link to comment Share on other sites More sharing options...
VaporTron Posted June 6, 2014 Share Posted June 6, 2014 That's actually pretty cool. It will probably never happen again. Ever! Lol Link to comment Share on other sites More sharing options...
Tam Posted June 6, 2014 Share Posted June 6, 2014 @tam (; And btw I test all my coils with a multi meter so I don't need a tester! That's a good boy! VaporTron 1 Link to comment Share on other sites More sharing options...
VaporTron Posted June 6, 2014 Share Posted June 6, 2014 I really don't want to blow anything off of me Link to comment Share on other sites More sharing options...
jerryjoe Posted June 6, 2014 Share Posted June 6, 2014 So I got my needle nose pliers, dykes, mini screwdriver set, tweezers and a magnifying glass. They had a torch but it was $26. I think I can do better than that. I'm checking home depot tomorrow.Does anyone else think $26 is high for a little butane torch? Link to comment Share on other sites More sharing options...
Aquatroy Posted June 6, 2014 Share Posted June 6, 2014 Not for a good micro torch, but some are junk. 12 dollar home depot model works fine... Link to comment Share on other sites More sharing options...
jerryjoe Posted June 6, 2014 Share Posted June 6, 2014 Thanks troy. Home depot it is. Tomorrow. Unfortunately they don't stay open till 11 o'clock at night Link to comment Share on other sites More sharing options...
Tam Posted June 6, 2014 Share Posted June 6, 2014 Does anyone else think $26 is high for a little butane torch? If I remember correctly mine was around $28 or so. Link to comment Share on other sites More sharing options...
jerryjoe Posted June 6, 2014 Share Posted June 6, 2014 I watched a video where they used a bic lighter to burn their kanthal. I could do that if I wanted to couldn't I? Link to comment Share on other sites More sharing options...
VaporTron Posted June 6, 2014 Share Posted June 6, 2014 (edited) I watched a video where they used a bic lighter to burn their kanthal. I could do that if I wanted to couldn't I?I used to use a blowtorch on the coils but now I use a mini butane lighter (mini torch) After I saw a video with a guy using this, I got one, the clear one. Lol Edited June 6, 2014 by VaporTron Link to comment Share on other sites More sharing options...
jerryjoe Posted June 6, 2014 Share Posted June 6, 2014 Where did you get that tron? Link to comment Share on other sites More sharing options...
Proetus Posted June 6, 2014 Share Posted June 6, 2014 Bunch of wire, heatshrink and bullet connectors from Hobbyking. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 6, 2014 Share Posted June 6, 2014 see those from time to time at gas stations in shady areas of town. I got one similar but it has a broader flame from a local b&m. I used to collect "jet lighters". you can find these things online for cheap as dirt. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 6, 2014 Share Posted June 6, 2014 look up jet lighter on ebay...you get these things for 5 bux...if you want a higher end lighter check out www.elighters.com Link to comment Share on other sites More sharing options...
Compenstine Posted June 6, 2014 Share Posted June 6, 2014 I have 3 torches I can use. One is a combo Bernzomtic soldering micro torch, Have one of the Bernzomatic mini torches (use this mostly now) and a lighter size torch. The lighter torch works best for the 30 and 32 gauge wire as the bigger torches have a tendency to melt the wire. Link to comment Share on other sites More sharing options...
VaporTron Posted June 6, 2014 Share Posted June 6, 2014 (edited) Where did you get that tron? gas station I have 3 torches I can use. One is a combo Bernzomtic soldering micro torch, Have one of the Bernzomatic mini torches (use this mostly now) and a lighter size torch. The lighter torch works best for the 30 and 32 gauge wire as the bigger torches have a tendency to melt the wire. Yha I bought this bc sometimes my wire would melt using a blow torch Edited June 6, 2014 by VaporTron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now