Uma

VAPE MAAAAAAAAAIL! lol, my Chi You clone arrived today. It performs just as advertised..... awesome. Threads are smooth as butter.

Oh Snap LOL Coffee, Yes Must Have Coffee.Juice

good vid thanks again Uma

You're very welcome!

Dimitri held an emergency Skype meeting with Dr. Farsalinos about this subject. I love how he grumbles about dumb scientists like Talbot.
He also grumbles about the vendors pulling the cinnamon, too, because they're just (innocently, gullibly) feeding into Talbots sensationalist narcissism. (My words)

It gets better towards the end, well worth the watch.
The gist? As long as we're not acting like amateur scientists who don't dilute the flavor in with VG/pg, we will be alright. So, in short, be sure to always dilute your Flavors into VG/PG and you'll be smarter than Talbot and the rest of the paid monkeys who wotrk for the ANTZ

You're welcome! Correct. Talbot (an ANTZ) ,tested non-diluted concentrated flavor. No pg. No VG. Just concentrated flavor.

Dimitri held an emergency Skype meeting with Dr. Farsalinos who has literally performed studies with vapor Flavors.
http://youtu.be/QRhFEGWPIp0

I came up with a very simple fix for your switch that is so easy it's scary.

The spring that makes contact with the bottom of the battery has way to much resistance, so you have to bypass it. Take the top metal piece out of a CE5 clearo head and sand down the short end (not the pointed end) flush with the flange. Press the pointed end into the top of the switch spring and you're done. When you snug your tubes down with the battery inside, it makes direct contact between the negative side of the battery and the spring floor plate.


Before & after sanding using 220 grit sandpaper on a flat suface (it took about 30 seconds).


The little curl-back in the top of the spring holds the bypass firmly in place so it doesn't fall out when you change out batteries.

Massive improvement!!!

*EDIT*

Since not all batteries are exactly the same length, I'd sand a little off at a time, periodically checking to see if your tubes will snug down all the way using your particular battery. In order for this to work properly, you'll need to sand off just enough for your tube seams to close all the way, effectively bypassing the spring and making good contact with the spring floor plate when snugged down.

Atmos are a alternative herbal smoking device. And not suitable for nicotine replacement. Also way overpriced here in "legal" Colorado..further discussion will wake Jeff up....lol

45 days on a single coil? That's got to be a record.

Hi all!

I have previously been vaping on variable voltage devices, but my lavatube broke, and I just didn't want to Invest in another expensive device back then. So I recently bought an Evod. Mostly because I was looking for an ecig with a reasonable price, but something prettier than the usual ego.

I received my Evod one and a half month ago, and here are my thoughts so far.
First some specifications:

1100mAh
MT3 bottom heating coil clearomizer + charger included
3,7V output (obviously)
Price: 10.88 USD (shipping was free for my country (Denmark))

First impression:
My first impression was rather good. It's a little beauty, really. It looks like an ego and has the same connection (510 / ego) and charger. The only real difference is the button. The metal part where the button usually is on an ego has been removed, and the button is now a part of the ecigs body. It's a round metal plate, and the light sorrounds the button like an outer circle.

This particular Evod came with a charger as well as a clearomizer. To fill the clearomizer up, you had to unscrew the bottom. A bit weird or inconvenient, but it works. However, if you hit the airhole, the liquid will just soak out straight away, hehe.

Performance: After charging the battery entirely, I decided to have a vape on it.
The draw was very airy. Personally, I had no problem with it, but some wouldn't like it. However, the amount of vapor was rather good. The tip of the clearomizer is transparent, so you can see some condensation after vaping on it. Anyway, after finishing the vape, I concluded that I was satisfied with it.

Now, after vaping on it for 45 days, the clearomizer is starting to burn out. I think that's my own fault, as I have had the entire ecig in my pocket without locking the battery (5-click method). I know it has turned on accidentally because of that, and afterwards the taste was burnt. However, the burnt taste stopped after an hour or so, and it was fine to vape on once again. Locking or dismantling the clearomizer will probably prolong its lifespan greatly.
The battery and the charger still works fine.

Conclusion:
Overall, I'm pretty satisfied with the Evod, and I like its performance. I'm probably gonna move back to vaping on mods and vv devices now, though. But I will definitely keep it as a secondary ecig or for going out.


Information:
The link for this exact ecig is http://www.chinabuye.com/1100mah-evod-detachable-electronic-cigarette-with-mt3-bottom-heating-coil-visible-window-atomizer-black

HA! - confirmation that there are bad side effects to vaping!

Been vaping for about 8 weeks now and I can positively say my wife's cooking has gone downhill !

I just wanna say... It's not about making sure there's absolutely no risk. The lower the risk, the better, for sure... But whether or not vaping is 100% safe is completely irrelevant because we KNOW cigarettes are absolutely, 100% NOT safe, and people are still allowed to smoke.

Also, I wanna point out that I think people should have the freedom to do whatever the hell they want to their own bodies and lives.

Great video. Short and to the point.
"The ideal option would be to not smoke or vape..." That depends on the person. Likewise, I'm sure I'd be "healthier" not consuming caffeine and not eating some of the junk food I eat, but I wouldn't be happier. For me, if the boost in my enjoyment of life far exceeds the risk to my health, I'll take that risk. Being multiple, I also discuss those risks with my headmates.

Good Video... you should add the links you refer too.

Hey guys. I've gotten a few messages from vaping newbies about how safe e-cigarettes actually are so I thought I would put together a short video to try to answer this by taking a look at some of the vaping studies and information that's out there.

And no I'm not a Doctor or anything like that I'm just a vaper that did some research

http://www.youtube.com/watch?v=Ar1jVFtnr6E

I must say I am pretty disappointed! Wasn't getting much of a throat hit or good vapor production at all. I watched a couple reviews and someone mentioned that it takes a couple seconds for it to start cooking the juice. After that it hits fine. I honestly can't really tell a difference between the regular protank coils though. I'm also pretty sure it's burning twice the juice since there is twice the coil, lol. Definitely won't be buying another. However, I was able to vape at 10.5 watts with no burnt flavor with a 2.0 coil! That was cool, but still no increase in vapor production or throat hit.

It will be out in a couple days

Wait. What? You mean to say the Pro Tank 10 is out already???

I pre ordered the KPT20

Thanks, Uma! Since I'm not home today, I couldn't do any more research (using my mother in law's laptop for this right now), so I'm glad to see someone dug up good information on it.

For me, it doesn't make much of a difference, because I only very, very occasionally vape cinnamon roll, (not in 2 months, even), but hubby vapes Inferno frequently. But if these studies didn't even vaporize and only tested in liquid form.

Got to play and use an iTaste VTR tonight and I think I'm in looooove. I'll leave the pipes to you guys.

And the surprise is that it's $10 less at my B&M than it is at DiscountVapor.com. Go figure.

I would want a Gandalf style pipe if I ever got one. It would fit right in with my Wizard outfit I wear to Renaissance Festivals.

I saw Santa's naughty list, I've got bad news for you. LOL

Thanks mate - as per the other topic, ordered that AGA S and a Spheroid to boot. Looked into the minigen and was put off by it being 14.5mm vs 16 (i'd rather have that hole totally flushed out).

Couldn't find info on the battery type for the microstick, 18350… but can i use protected batteries on it?

Most of the "experts" recommend using IMRs in mechanical mods. I buy AW IMR18350s from Vapor Kings.

Here's some information by Phil Busardo on why IMR batteries are recommended for use with mechanical mods & LR coils.