Leaderboard

After trying it on a few units, I realized I dont have a PV that will fire a .2 ohm atty

Today, I received my Arctic Tank from MyVapeDeal.com! My first impression is that it is a beautiful tank, and well packaged with clear plastic coffin-box and cut-foam fill to protect the tank and spare coil. The one I received came with two 0.2 Ohm Bottom Turbine Dual Coil cartridges, and they are made with 100% USA Kanthal and Organic Cotton. The tank had virtually zero machine oil on it, and cleaning was almost unnecessary. The tank reminds me of a Kanger AeroTank, with a huge-bore drip-tip and four massive 3.3mm air-holes. Break-down of the tank is simple, as the tank body does not come apart... which is one of the major drawbacks, because if you break the Pyrex tank section, you cannot replace just the glass First fill-up on the tank and first vape (wide-open air-flow), and the draw has NO restrictions. Actually, even at half-open, there is very little restriction. To get the feeling of a Kayfun or Russian, you have to virtually close the air-flow! At 4.0V (80W) on my mech-mod, the vape is very warm, and reminiscent of dripping, based on cloud and Nicotine-hit. I had to quickly dial it back to 60W (using my IPV-mini2 - which BTW, had issues firing it at first, because it read lower than 0.2 Ohms) to get a "comfortable" vape out of it, using 50/50 juice @ 6mg Nicotine. This thing is also a juice-hog, as it burned through 1ml of juice in about 20-min. My second juice to try was a 20/80 3mg, and the coil wicked it VERY well... no dry hits, no burnt taste, and just a good, clean vape... like dripping. I would love to try this with the 1.2 Ohm single-coils, as well as the 0.5 Ohm single or dual coils. I think this thing would be excellent with a little higher Ohm coil. Sorry, no pictures of the unboxing, but I'll post some of the tank soon Overall, I give it 4.5 stars out of 5... with my only complaint being the one-piece Pyrex/steel tank body, but it's not a deal-breaker by any means!

Nice Tug :thumbup:

10 mg nic might be a bit much at 5 ohms. It was for me anyway. I found that the sweet spot for me with a 5 ohm coil was 5mg of nicotine @ 25w. As for the spatter, maybe try a slightly thicker juice (more VG) and/or different drip tip?

pitching washers??? we pitch quarters here in the BadLands..

2-1/2 days I finally gotta charge it It had the original charge from when I bought it :thumbup:

My UGA AR15 Tac Mod showing some red and black pride!

Im trying to take one apart and I cant get past pulling the little thingy out of the white thingy at the bottom Does it come apart further that that? I can take a car apart and put it back together but this thing driving me nuts :help:

Race baiters like Al Sharpton are the biggest problem. Sure there are instances where race plays a factor in ones treatment and that is wrong but the assumption with him and others seems to be EVERY instance is about race which is simply untrue.

Hope your neighbors don't call the fire dept. when all that vape rolls out the window.

So far I have done about 15 today. I use .5X1 kanthal ribbon wire the coil master works better with round wire but ok with ribbon wire. I use 5/4 wrap on a 2 mm rod and get 1.7 -1.9 ohms, barely fits but works great.

My coil that came in the tank reads at 0.2 on the dot.The other one may read different,but I also am loving this tank.Really good flavor and damn close to a dripper as far as vapor production goes.i will say that there is some breaking in with the coil.the first 10-20 puffs I took didn't taste very good but eventually it got better.i agree with the fused glass as a con,they almost go this thing perfect.Why cheap out and not make the glass replaceable? Is this a sneaky marketing trick lol,you break it you gotta buy another

I will run mine at 50w

Thank Earthling. He got me with it last night and I wound up ordering my third iStick 50W...

Have y'all heard about the Efest 18650 2800mah 35A/80A IMRs? I think they just came out.

This forum is for ecigs not for dry herb or concentrate vaporizers.there are other forums for what you are looking for but this isn't the one.