Adversarious1

Thanks y'all!!  Been zero nicotine for 2 months now and plan to stay that way.
 

@Walt  -  I am complete opposite lol
My mixes are delicately spooned into ancient handmade carafes and lightly paddled by just the dangling toes of cherubs who's feet have been bathed in holy water, and all in a relaxing stone chamber with Zamfir playfully mouthing his pan flute. 
Ok, I may be exaggerating a little.  Still I like paddling my mixes lightly in a  high ball glass with a butter knife then transfer to a warm bath.  They emerge 10 minutes later fully integrated and once cooled, ready to vape.  
They seem to be slightly more flavorful after a week but I'm not sure beyond that .....
 
 

Look what I got today.   

It's like @FXRich said...just because you have a car that'll go 150 mph doesn't mean you have to drive it 150 mph.  The same holds true for mods and tanks that go well over 100 watts.  Just because a mod will fire down to .01 Ω doesn't mean you have to run a .01 Ω coil.  Just because a mod will go up to 200 or 300 watts doesn't mean you have to use that mod's full potential, which is ultimately the point - potential.  I like the fact that I can run 120 to 150 watts with my Cloud Beasts and I like the fact that I'll be able to push a King Beast up over 250 watts if I want to cloud up my mancave.  At the same time, I like the fact that I can build a 1.8 Ω coil in my LEMO or my Kayfun and run it in the neighborhood of 15-20 watts on the exact same mod if I just want to chill and do some MTL vaping.
Options and potential.  That's the point of being able to run a mod over 200 watts.

Just got my KPT2 that I won in auction. My invoice had a "thank you!" sticker on it but no "Thank you, Jeff!"  

Check kbeevapes for wire.  Free shipping and their larger spools are frequently lower than Lightning.  I also use Amazon for a lot of my wire.

lol - honestly, it doesn't mean hot.  In fact, I get a cooler vape with my Cloud Beasts with the .15 ohm T8 coils at 125-130w than I do with a handmade 1.8 ohm coil in one of my MTL tanks at 15-20w.

Yes...yes it is.  But that's the way...uh huh, uh huh...I like it...uh huh, uh huh.
I'll occasionally build a 1.6 or 1.8 ohm coil for MTL vaping, but I'm usually in deep in the sub ohm area day-to-day.

Yes...yes it is.  But that's the way...uh huh, uh huh...I like it...uh huh, uh huh.
I'll occasionally build a 1.6 or 1.8 ohm coil for MTL vaping, but I'm usually in deep in the sub ohm area day-to-day.

These are the product of my rebuild Thursday this week


Sent from my iPhone using Tapatalk

Okay. ...vapor talk 95% of the time!! The only other places I have ordered from were for juice, and I got my griffin 25 plus at element vape ,they have really good prices on tanks but their hardware is a bit high. Why do I like vapor talk so much? Great prices,the best customer service I have experienced thus far. They ship fast, I have even screwed up a couple of orders and Christopher has personally fixed them for me,and *before* they shipped!! Also,the coils I buy are sold in  5 packs elsewhere, and here individually ,so I can buy what I need when I need it without having to buy excess when the budget gets low!! If you need something, you let Christopher know,and he gets it. I have never had a problem here,and I will continue to shop here first. NO I am not sucking up....if they did not earn this repute I would not give it!!

Great idea.  Can I have "Thank You, Jeff" written on my future invoices also?

I received my order yesterday and i was hoping for a little personal note. I was excited as I pulled the items from the bag. They were wrapped up in purple tissue. It was like Christmas. I brimmed with excitement as I pulled the invoice out. I just knew that Chris wrote something witty for me. But alas, it was just an invoice. I felt so used and unappreciated. Tears drop on my keyboard as I type this.

I think we all should get "Thank you, Jeff" written on all our invoices    And hand-drawn "Muffin-man" would be awesome on random packages!

Great idea.  Can I have "Thank You, Jeff" written on my future invoices also?

I would like a "thank you Jeff" handwritten on my invoice from now on.

Some suggestions: ANML, Charlie Noble, Charlie's Chalk Dust, Cosmic Fog, Alpha, Omega, Propaganda.  Just some manufacturers of some of my past and present ADV's.

Just got the Avocado and loving it. It did take about four tries to get the wicking right. I got a "dragon" coil in at them moment; 0.235 ohms vaping at 60 Watts and she's chucking the vapor.


Sent from my iPhone using Tapatalk

Turn down your wattage and move up slowly. Another thing, minor but important. When you put in a new coil, wait for the wicking inside the coil to saturate a bit. When I put in a new coil I usually take two or three hits without pushing the power button (this pulls liquid into the reservoir). Otherwise you're going to take a hit on an empty coil and you'll get that burnt hit. once the coil finally does have liquid, it'll take a little while to get the burnt taste a way. 
Again turn down the wattage on your device, more isn't always better, new coil, saturate, then move up your wattage slowly until you learn what that coil can handle. 

Just because all my current mods are rated up to 200-300w doesn't mean I have to vape them that high..
Its nice to have that extra power just in case I need it like with the CloudBeast series of tanks at 120-150w or so seen here... and I enjoy the versatility vaping at lower wattages with an RTA as seen here on my RX300 mod.. this particular dual Clapton build Vapes awesome around 75 to 80 Watts, even though I'm vaping it on a 300 watt mod.. there are many more reasons I favor these muli-battery high powered mods, like going for days on a single charge.. [emoji4]
 
Sent from my XT1585 using Tapatalk
 
 
 

Which specific coil are you using, what device are you using it on and what settings are you using on your device?  I have had multiple baby beasts in rotation practically since they were released, have used them on multiple devices and with multiple coils and the only time I have had a burnt taste was 100% operator error when I accidentally fired my mod without having any liquid in with a brand new coil. 
In other words, a little more than "I am getting a burnt taste, please help" is needed.  We are more than happy to help, but we need to know what you're working with so we can provide accurate help.

And... with the troubleshooting from @Adversarious1 and @Earthling789, you can up your wattage to help vaporize the juice from coming into your mouth, or you could always get a longer drip tip or a drip tip with a screen on it to lessen the amount of eliquid that gets into your mouth.   

I have always pronounced it "smoke" rather than "smock".  Only person I have ever heard say it as "smock" is Rip Trippers.

Which specific coil are you using, what device are you using it on and what settings are you using on your device?  I have had multiple baby beasts in rotation practically since they were released, have used them on multiple devices and with multiple coils and the only time I have had a burnt taste was 100% operator error when I accidentally fired my mod without having any liquid in with a brand new coil. 
In other words, a little more than "I am getting a burnt taste, please help" is needed.  We are more than happy to help, but we need to know what you're working with so we can provide accurate help.

I agree. Keep tracking of everything is ridiculous. There's just so many options these days. 
It looks like I'm going to head out to China again in a month or two. We have plans to try and stop by SmokTech, if so I'll deliver the message (Seriously, they actual love feedback direct from US consumers. It helps that Roger speaks Chinese so we can get whatever point across we're trying to make)