Edna

Personally I'm getting tired of the government telling me what's best for me. I can make my own decisions on what's best for me, I don't need a bunch of politicians in DC telling me how to live my life. I also know a society needs a certain number of laws, but right now I believe we have too many laws that infringe on our freedoms.

Thanks to you when I went into the local B&M today and was looking at mods I looked at this mod.Killing time, The sales guy said it was great and I said it's not for me because I told him that it didn't turn on and off and he thought I was nuts until he popped batteries into it and tried it out. I told him to read your review  to get the low down on the mod.

Thanks to you when I went into the local B&M today and was looking at mods I looked at this mod.Killing time, The sales guy said it was great and I said it's not for me because I told him that it didn't turn on and off and he thought I was nuts until he popped batteries into it and tried it out. I told him to read your review  to get the low down on the mod.

For 1.2 Ohm, usually 6/5 wraps of 28ga or 9/8 wraps of 26ga on 3mm mandrel....  I like a larger diameter (2.5-3.0mm) for better wicking of 50/50 or thicker juices.  I think my last one was 7/6 wraps (3mm mandrel) of 28ga for dead-on 1.4 Ohm on my Russian 91%?  Which was perfect for my Chocolate Raspberry juice   For my Subtank Mini RBA deck, 3mm works well too, but I've found 2.5mm and a macro-coil (coils spread out a bit) seems to vape better.

I've got a couple of really dark juices too... and yeah, they rip through coils, compared to my clearer or very light juices   But, I've found that if I use dark juices only with my RTA's, and like @Tam stay above 1.2 Ohms with my builds... I can usually get a week or more before I have to re-wick and clean the coil.  The coil itself can hold out 4-6 weeks if I dry-burn and re-wick about once a week.
If I use a pre-built coil... my 1.5 Ohm coils (12-15W) can last about 10-days on average (if I can re-wick them, I can get about 3 weeks before tossing them or fully rebuilding them).  Lower resistance coils don't last as long with dark juices....

Hmmm, timely question.  I've been thinking about my drip tip(s) lately.  Not so much as to the preferred shape, but where my DT goes during the day.  It goes in my pocket, both pants and shirt, on the car seat, on the dash (and on the floor), on table/counter tops of eateries where they're sometimes "inspected" by someone interested, and occasionally on the ground......and in my mouth.  Which got me thinking about making a special one just for me with .999 silver.  Pure silver has some amazing antibacterial properties, so, since I have the equipment, know-how, and the "want to" I'ma thinking I'm going to make myself a one of a kind DT.  Right after I decide on a shape......and source some proper O rings .........and find a few of those "round tuit's"   Haven't caught anything from my DT that I know of (yet), but .........  Could be an interesting project.

I loved my E-Mechs!! They are solidly built. I had 3 when they first came out, and I have long ago pif'd them away. 2 of the 3 are still working great I'm told. The other one was lost. RDAs great on this mod, but keep in mind it is only 30W so it is dependent on coil build. IIRC, I used mainly magma and vulcan RDAs, and orrchid RTA on this one when I had it.

@earthling It's a dual cell series, not parallel. Thisis why Emech never had the chance to take off. They came in very late with the 30W. By the time this was released,  the wattage war has already started. 
For 15 bucks, call yourselves a bandit. It's a steal.

@Christopher Not to worry!  I don't need swag but thank you for thinking about it.  I need the mod here soon anyway since I'm going to go down to Southern TX visit him this weekend. So I'm very happy about you putting the fear of your wrath into them I'll give Evan a call tomorrow. Thanks

@ChristopherI just ordered the black one to give to my son that I am trying to get to quit analogs. He's in his early 30's and used to play with transformers as a kid so maybe he'll think it's cool and it'll motivate him to quit, for 15 bucks it's worth a shot ...3 months for me yesterday and not looking back Chris stop putting cool stuff for sale I'm going to go broke
 
Hey All,
Does anyone know what would be a good RDA or tank for this mod?  His GF builds her own coils so I'm sure he'd be ok with an RDA or a RDTA
Suggestions ...he's probably MTL

I like this width

Thanks for a thorough review. You managed to answer the one question I had that I couldn't find in any of the other reviews of this tank. I'm a MTL vaper who likes a cool vape so this one is probably off my list. Thanks for saving me the money for a tank that probably wouldn't work for me.   

I like the Coffee mate French Vanilla Creamer in my morning coffee...That sounds good

Congrats. My son started basic training last week.

Sent from my Nexus 6 using Tapatalk

Juice inst a problem for me I mix 480ml at a time

I like both, but I'm with Tam on the wide-bore.... There is a point where they are TOO wide, lol  The ones I like best are those that are 5-7mm ID and smooth interior.  Those are really easy to get a Q-tip through for cleaning   As for outer shape, I'm flexible for most any that are smooth, not overly odd-shaped, and not angle-cut... had one of those angle-cut muffler-style and damn near pierced my lip with it, because it was MUCH closer than I thought it was

I like the acrylic round type. I have a couple that even have anti-spit mesh in them that are great on my Avocado RDA. They make for a really nice vape.

The 5% Cup o' Joe in this mix is just about right for me. I haven't tried it in any other mixes though. I'm thinking of a french vanilla coffee. I love COFFEE!

I get them on eBay. Normally, I don't buy anything on eBay that has to do with vaping because of some questionable quality and safety issues, but wraps are pretty innocuous so... They have wraps for all different types of mods.   

Awesome! Have you tried the Vapor Talk Black Label by the way? I can't recall (I'm getting old) If not, let me know and I'll throw some in for you to try, just let me know the strength

Personally after a few years of vaping I have settled on a 30PG/ 70VG mix, but I use Subtanks mostly, and different tanks perform differently with PG/VG ratios, so a lot depends on what tank you use and the coil you use. There is no ratio that works for everybody.

It's 10 bottles for 10 dollars. But I can make some adjustments so that it can be purchased individually (Give me just a few moments) 
EDIT: Ok I've made some adjustments so that the flavors can be purchased individually.
@Tam Club Royale is Pineapple Coconut and Banana.

@Chris
Thank you! I just ordered a variety for a friend who is just starting to vape. Also a couple of bottles for myself to try.

@Edna Thanks thats pretty cool

Yep, those would be the ones. Forget "boat", I think they came over on the tide...    

Hey Folks, 
I'm working to expand the DIY section of the store. Selection is always great so next week we have the following coming in (end of week)
GeekVape Kanthal A1 Tape Wire (22GA) GeekVape Kanthal A1 Tape Wire (24GA) GeekVape Clapton Kanthal KA1 Tape Wire (26GA + 32GA) GeekVape Kanthal A1 Tape Wire (26GA) GeekVape Kanthal KA1/Ni80 Tape Wire (26GA Ni80 + 32GA) GeekVape Clapton Kanthal KA1 Tape Wire (28GA * 2 + 32GA) GeekVape Twisted Clapton Kanthal KA1 Tape Wire (26GA * 2 + 32GA) GeekVape Twisted Kanthal Double KA1 Tape Wire (26GA * 2) GeekVape Kanthal A1 Tape Wire (28GA) GeekVape SS316L Tape Wire (24GA) GeekVape SS316L Tape Wire (28GA) GeekVape SS316L Tape Wire (26GA) GeekVape Twisted Clapton Kanthal KA1 Tape Wire (28GA x 2 + 32GA) GeekVape Twisted Clapton SS316 Tape Wire (28GA*2/Twisted + 30GA) GeekVape Clapton SS316 Tape Wire (26GA + 30GA) GeekVape Fused Clapton SS316 Tape Wire (26GA*2/Paralleled + 30GA) GeekVape SS Stagger Fused Clapton Wire, SS316L(26GA+32GA)x2+32GA GeekVape Kanthal A1 Flat Clapton Wire, Ribbon(26GAx18GA)+32GA GeekVape Kanthal A1 Fused Clapton Wire, 24GAx2+32GA GeekVape SS Fused Clapton Wire, 24GAx2+32GA I'm also working to bring in some other brands, tool kits, gizmos & gadgets. Bare with me, it's coming along