shen_long86

This came in yesterday. Council of Vapor Mini Volt mod and a Royal Hunter Mini rda.
This little mod hits like a beast for only 40 watts, and the flavor i get from the rh mini rda is phenominal.

This came in yesterday. Council of Vapor Mini Volt mod and a Royal Hunter Mini rda.
This little mod hits like a beast for only 40 watts, and the flavor i get from the rh mini rda is phenominal.

This came in yesterday. Council of Vapor Mini Volt mod and a Royal Hunter Mini rda.
This little mod hits like a beast for only 40 watts, and the flavor i get from the rh mini rda is phenominal.

Got this in monday and i love it. I also got in 8 30mls of juice from quitthatgrit.com

Welcome to vapor talk. If you have any questions about vaping, no matter how small do not hesitate to ask. There are plenty of experienced people here that will be willing to help.

Thank you I will try that!!

I had the same issue last night after i rebuilt my aromamizer and put it on my rx200. I took the tank off and used a qtip to clean the 510 connection on the mod and also on the tank. After that i screwed it back on and it worked fine.

Hello I have a wismec realeaux rx200 and I'm running it with a sense Herakles plus on it. I have been running this setup for around a month and it's been great until recently whenever I open the juice flow even just a little bit the mod says "no atomizer" and when I close the juice flow it will sometimes hit and other times it will say it again. I've tried taking the tank off, I've tried loosening it, and I've tried tightening it. I really don't know what to do.

I agree with Tam...what is the resistance on this build. Also you do know that your not supposed to dry fire titanium like that, because it releases toxic chemicals. When i build titanium coils i always wash and dry the wire before building, but never dry fire.

Can you post a better image... Looks as though there is no coil so yes it would read "No Atomizer Found".

Any chance you could do a clearer picture in focus?  Its not good enough to diagnose.  Very hard to see actual connections.
It looks like it should be one leg up, one leg down like this build. 
 
 

Having a clear image would help, but from what I see, what you have is direct sort of every coil.
Facing coil looks to be hooked to both top Pos (+) terminals
Right side coil is hooked to both bottom Neg (-) termanals
Left side coil is hooked into the Pos (+) at the top on the screw and the bottom is hooked to the Neg (-) pole? I can not tell for sure.
The coil in the back I can't tell how it is hooked in.
Each coil needs a Pos (+) and Neg (-) connection to complete the circuit. With out that, or doing it with one and not the rest is a broken circuit and Direct sort circuit and if it were not a regulated Mod, a face bomb.

Good.
 
straighten out those coils, measure their resistance and make sure it's safe before you go too crazy with it. 
Good luck.  Do not blow yourself up!!!!

What resistance is your ohm meter reading on this coil? Just curious...   

Got ya he airflow looks like the mutations

Mutation Shen??

I finally got my Fishbone + RDA from China yesterday. I guess a month in transit for a sub-$20 RDA that performs as well as this one does ain't too bad. Right now I'm vaping Wastegate by Boosted (Raspberry Cheesecake and Vanilla Ice Cream) and it absolutely tastes more intense now than it ever has. The Fishbone + has a triple-helix airflow design that provides exceptionally smooth pulls for a direct-lunger, too.

It's nice to be able to see inside my dripper.

I built it with a single .16Ω 2.5mm Ni200 horizontal coil between it's Velocity-styled posts.

This weeks haul.

Today, I received 4 packs of Horizontal SubTank coils from Sweet-Vapes (I think they taste better, and they're so easy to re-wick to make them last longer), as well as two ST RBA's (one original, one plus), and something interesting...  They had Pyrex ST Bell Caps (with frosted drip-tip) for $5 on sale, and ST air-flow bases for $7, so now I have an all-Pyrex SubTank for 1/3 the price of a "real" SubTank Mini I think it looks kinda sweet on my Cloupor Mini! 
I'll probably only use this at the house, for fear of dropping/breaking it, but it looks really good...  Next time I order from S-V, I may pick up a couple more caps and bases... the Bell Cap only has option for SS connection, but I think it would still look good with a black base?

Nice looks like they made it good, especially the battery door that was a huge disappointment on the d2 

I wonder why the 4/4s can not be updated to 200 watts. They use the same chip as the 3 LI 

The IPV 3 LI 165 watt upgradable to 200 watts. Looks good, anyone get one yet. I'm wondering if the quality is as good as the 4/4S 

It has a candy inhale and a smooth exhale, to me it tastes like a cross between pixie stix and sweet tarts.

Got in my secret santa present, free juice...

Got in my secret santa present, free juice...