Tam

As Bebop said, the button may be dirty or have juice dried inside it. Try dipping a Q-tip into some rubbing alcohol (not so much that it's dripping, just enough to wet the tip), and give the button and the area around it a good cleaning. I would also clean the 510 connection between the mod and the tank. That's a very popular place for extra juice to accumulate.

No problem, I moved it to General Vaping Discussion.

http://www.smoktech.com/hotnews/products/h-priv-109-firmware-upgrade-guide No driver to work with a Mac iOS system at this time.

Welcome to Vapor Talk.

You said you set it to 42 watts. What resistance is your coil? That seems a little high to me. If you haven't fried your coil, you should do as Bebop suggested and start at a lower wattage. Vape. If it's not doing it for you, turn it up a LITTLE bit then vape again. Repeat until you get a slight burnt taste then turn it down a notch. That should be the sweet spot for the particular juice/coil combination.

I still want a pony...

The "low res" on your screen says that the atomizer's resistance level went lower than what your mod can accommodate (use safely), which is why it stopped working. The coil inside will start at a certain level but will go down as you use it so this is normal. Since I'm not familiar with the Aspire Evo 75, have a look at this video. Phil Busardo's vids are pretty long but he explains everything very thoroughly. Hopefully, someone else will also come along and will be able to give you more help.

Welcome to Vapor Talk.

Welcome to Vapor Talk.

70 PG/30 VG is very thin juice. This could be the culprit.

What PG/VG ratio is your eliquid? If you have a higher PG amount, that makes the juice thinner, which could cause the leaking.

I'm just glad you're safe and all you got was a harsh vape.

Actually, I really haven't had this experience. Whenever I put my mod in my pocket or purse (a dedicated pocket in my purse), I turn it off first. Other than at home, I always turn off my mod when not in use. Now that I've said this, I'm sure I'll get caught not turning off the mod or locking the buttons.

Your concern is justified, but have you tried talking to him about it without being accusatory or using inflaming language? To start a discussion? Just curious. What are you concerned about? His addiction to the device? If so, why?

Let's say... for the sake of argument... that Frank is not a troll. There are some good replies and instruction of vaping, vapers, and vapor already. @Frank mcquade does this info help answer your question? All too often, the vapor released looks like smoke but is more like the mist that comes out of a humidifier. I agree that your coworker should, at the very least, be courteous enough to open the window of a closed in vehicle while you're in the car with him. Have you tried asking him to not vape in the car or open the window? If so, what does he say?

The Vapor Talk store EC Blends Vape Dudes The Vapor Room Mt. Baker Vapor

Pop in a brand new coil after priming it. Then, let it sit for a few minutes so the liquid can be absorbed by the wick. Set your watts to... say something like 10 - 15 W and vape with the airflow wide open. Then, if that's not doing it for you, turn it up by a few watts. Vape. Repeat until you get a slight burnt flavor then turn it down. That should be the sweet spot for that juice (different flavored juices like different temperatures). Using 70W with a 0.5 ohm coil... that's just asking for the wick to fry, imo.

Topic moved to Vapor Lounge, Boss. LOL

And if you're not, then you work by bending over backwards to make it so.

How much does the mech sauce cost per ___ ml bottle? You could take a look at the Vapor Talk store for eliquids. Other good vendors are EC Blends, The Vapor Room, Vape Dudes, Mt. Baker Vapor...

Seems like a theme with this vendor. Everything is okay... until it isn't, and then the customer service... sucks. Might try the Vapor Talk store. They're not perfect (no vendor is 100% of the time), but when things go sideways, the customer service will make it right. I may be an admin here but I don't have anything to do with the store, I'm just a frequent customer.

Forgot to ask... how many watts or volts are you running? If you're using a 50/50 blend, you might want to go up to a 40 PG/60 VG or 30/70 ratio for more clouds and open up your airflow. I run a 40/60 and get plenty of vapor without sacrificing flavor. YMMV.

According to one site the Innokin iSub APEX tank uses 2.0Ω, 0.5Ω and 0.2Ω iSub coils. Which one are you using? You also didn't mention what PG/VG ratio your juice is?

What's the PG/VG ratio of the juice you're using now? The higher the VG level, the more clouds but it tends to mute flavor. PG is the flavor carrier -- so more PG, more flavor. The type of tank and coil set up could also affect vapor production and/or flavor. Tell us a little more about what battery and tank combo you're using. That information will help us to help you better.

Moved to Eliquid Reviews section.