Rixter

WOW that gets nice and warm fast

While it may not appear visually smooth with the power level (watts) jumping up and down on the screen, the end result is that it's keeping your temperature at a constant level that you preset, which provides a very consistent vape. Like I stated earlier, with my temp limit set to 500F and my power set at 20 watts, it doesn't take very long for the coil to reach 500F. Then it cuts itself back from 20 watts to between ~8 to ~12 watts (and all points in between) to maintain that 500F coil temp.

Say hello to Monique Candia...HEY...wait a minute!!! That ain't right!!!

Say hello to Monique Candia...HEY...wait a minute!!! That ain't right!!!

Really?!? I have to buy another mod now?!? Thanks a lot, jasonculp!!!

This is a cool looking kit.  I like the colors!  The black Mini looks great.
 

 

When I saw that name, this song jumped right into my head.

So far so good  why I have no clue
 

Its reading   coil now  and Im getting a nice even hit :wallbash:

OK 3rd coil I got a temp lock and not getting "no atomizer" message

I just got nearly the same thing in.  I didn't get the Bell Cap, but I wish I would have.  I got the Coils and Wire.  The only problem is the TC Mod I chose is on a very expensive slow trip from china!  I went with the 60 Watt TC Zero Clone (Probably made by SKX).  I can't wait!
 
I guess I could also get the Bell Cap before the mod gets here (run the bell cap on the Temp Control Subtank Mini and regular top on my non temp control Mini)
 
@Rixter... Thanks for the suggestion on Triangle Vape and the new EFest 18650s.  I got 2 25R's Which are great, but so far the Efests seem to last a bit longer. (on my Sigelei Mini @ 30 watts, Lemo 2 @ .9 ohms)

Today's mail brought my Kanger Subtank Mini & bell cap and a spool of Ni200, so I wasted no time getting started. I made a 12 wrap 2.5mm 28g coil that metered at .12Ω and installed it into the RBA head of the Subtank Mini. The Invader Mini immediately went into temperature control mode and after a couple of settings adjustments, I was vaping. Everything is working as advertised and I couldn't be more pleased with my new setup.
 

Congrats Tam. You've almost caught up with me!

I really like that bell cap.

Went to the shop today Ray helped me out big time figuring this thing out. He liked it first one hes seen he was very Impressed with it. Bad news no Nickel wire coils to be found around here.

$31.68 shipped.
 
From the product page at Steam Monkey:
 
This is the EC Supply Ceramic Coil building kit. It comes with multiple, durable ceramic rods for wrapping coils and a pair of ceramic tipped tweezers. The rods have silicon grips to help block heat transfer and come in a variety of diameters (listed below). The fact that they're ceramic (as well as the tips of the tweezers) means you can fire your coils ON the rod or pinch your coils with the tweezers while firing and not have to worry about shorting out or welding your coil to your tools! A really great little kit that comes in a nice zippered case with enough room for some other bits and bobs like wick and wire, maybe a small pair of scissors and a screwdriver/allen key.

Package Contents:
1 x ceramic tweezer 6 x ceramic rods (diameter sizes: 1.6mm , 2.0mm, 2.4mm, 2.8mm, 3.6mm, 4.0mm) 1 x leather carrying case Looks like this kit could make getting your coils nice and tight very easy.

$31.68 shipped.
 
From the product page at Steam Monkey:
 
This is the EC Supply Ceramic Coil building kit. It comes with multiple, durable ceramic rods for wrapping coils and a pair of ceramic tipped tweezers. The rods have silicon grips to help block heat transfer and come in a variety of diameters (listed below). The fact that they're ceramic (as well as the tips of the tweezers) means you can fire your coils ON the rod or pinch your coils with the tweezers while firing and not have to worry about shorting out or welding your coil to your tools! A really great little kit that comes in a nice zippered case with enough room for some other bits and bobs like wick and wire, maybe a small pair of scissors and a screwdriver/allen key.

Package Contents:
1 x ceramic tweezer 6 x ceramic rods (diameter sizes: 1.6mm , 2.0mm, 2.4mm, 2.8mm, 3.6mm, 4.0mm) 1 x leather carrying case Looks like this kit could make getting your coils nice and tight very easy.

Nice to be able to see your juice level with no blind spots.

Let us know how it works out!  I had one in the cart last night and talked myself out of it.  There are so many new temp control mods out there, I just can't make my mind up.  The new Sigelei that is rumored to have a SX350J in it looks promising if it is in the $100 range.  I still want the SX mini m class, but I don't think I will save enough to get one, too many less expensive mods hitting the market.

Maybe I need to stop hiding it so much at work!

I vape openly almost anywhere in any of our buildings and allow the employees to do the same and have not had a single issue in over two years. I know what you mean there are 9 people at work that I got started but a couple still smoke too. It's rewarding to watch the others regain their pre-smoking lifestyle and am always happy to answer any question. Boaters and vapers are two of the most helpful to each other of any subsets of society I know!

Like you, I'm the resident "expert" on all thing vaping at my job. So far, I've converted over a half-dozen co-workers (as well as a couple of wives) from smoking to vaping, and also created quite a few ex-smokers in my general area. Other smoking co-workers see the converts vaping and now they're coming to me and asking questions, so it looks like I have my work cut out for me. It really is a good feeling to have the means to help people finally get free from cigarettes.

Sorry Comp, but this is the absolute largest container I could find for you. If you need more capacity, you're gonna have to get two.