FXRich

Sounds like a low battery warning, have you tried cleaning the connection? take the tank off and clean the connection with a Q-tip, see if that helps, or you might have gotten juice in the switch. You can also plug it in and use it as a pass through.

They usually last longer than 3 months, do you charge it until the light on the bottom turns green?
there has been reports of the Subvod battery not lasting very long.

Subvod mega might take longer, it has a 2300mAh battery instead of 1300mAh battery.

Subvod mega might take longer, it has a 2300mAh battery instead of 1300mAh battery.

Which coil are you using? If you are using the .15 coil it might be your resistance might be dropping below the .10 ohm cutoff point.

I remember those, refills for cigalikes were sold in them. Still have a few hanging around, use them for drip tip covers a KPT tanks.

If I remember right you said your brother is a machinist, tooling such as end mills, small boring bars, and similar items come in tubes with plastic caps on the ends. They make very good drip tip covers. Talk to your brother about getting some for you, normally they get thrown away. I use them for drip tip covers.

Not a problem The method of request is all the same  I have both of these now on order. 
@Edna- You got it, will take a little longer for these but I'll get them in as well on the next big shipment for little China (Should arrive next week)

I think this would be a welcome addition to the VT store http://sweet-vapes.com/apvs/kanger/dripbox-bottle-7ml.html
Be nice if you had these too http://sweet-vapes.com/tanks/kanger/kanger-coils/kanger-dripbox-coil.html
Sorry about the external links, be nice if I could have one stop shopping for my vape hardware.

Aspire Quad Flex Survival Kit   No big rush though
Quad-Flex 4-in-1: Four ways to Flex, survive any situation with the following quick-fit configurations:
*Quad-Flex RDTA - drop-wick tank with dual or single Airflow
*Quad-Flex RDA with Turboline Side Airflow
*Quad-Flex squonker (bottom feed) RDA with Turboline Top Airflow
*Nautilus X 2ML Top Airflow flavor tank

This Christmas we should decorate the trees with politicians, the whole country would get a Christmas present that way.

This Christmas we should decorate the trees with politicians, the whole country would get a Christmas present that way.

This Christmas we should decorate the trees with politicians, the whole country would get a Christmas present that way.

Can we all agree this whole "public threat" thing is total ********? I'm so tired of hearing about the battle against the "threat" of e cigarettes. 

Sometimes a product can go through a lot of wholesalers, before it gets to the retailer, which would explain unknown source. The Kanger products I got from VapeNW had authenticity stickers on them, and I did check a few of them and they were  authentic. Fast Tech states on their website that authenticity stickers are removed before shipping. (I can't remember the reason that they stated) The rest I have never ordered from so don't know about them.

Found this recipe on the net for Cracker Jack, might be worth a try, recipe didn't say what brand of flavors.
10% Popcorn
8% Caramel
6% Peanut Butter
4% Hazelnut
2% Bavarian Cream
Comes out to 30% a little high for my taste.

I received my Kanger dripbox Friday, so far I like it, I didn't drip before because I didn't want to keep dripping every few minutes, now all I do is squeeze the bottle a few times after a couple of hits. and using a regulated mod helps too.

They have improved a lot since then, no little tube needed, and so far mine hasn't leaked at all. and it has a 22mm RDA. 

Oh I see now ....I was hoping this would help.

After the 60w came out Kanger developed the other coil, they are interchangeable. I hope they will improve on the RDA tank like they improved on the coil, but that is probably down the road a few months.
Right now its more of a toy, rather than something I would use every day.

I have been using a 160w dripbox for a day and a half now, the dual battery setup has lasted 2 7ml tanks of juice. The mod itself works well. I have been using TC because I'm not used to dripping, and didn't want to burn the cotton when the wicks went dry, which has happened more than I would like to mention. The mod itself is about the same size, and shape as the RX200, it has a hinged battery door, and a magnetic bottle cover, they both work well. The kit comes with what they call a velocity style build deck, 2 square posts with 2 holes in each post, besides a regular dripbox coil which is also very easy to rebuild. The only problem I have found is the air inlet is too high on the tank (near the top of the tank) which causes the tank to get very hot. I have temporarily solved this design flaw by turning the tank over so the air inlets are on the bottom, and it works much better, and runs cooler. When I turn the tank over I can't push it down all the way because if I do the air will be blocked, I also lose air adjustment when turning the tank over, but I run it with the air open all the way anyway, so I really don't lose anything.
As far as performance goes I get bigger clouds, and better flavor compared to the Subtank minis I normally use. Currently I'm using 2 8 wraps around 3mm 28g 316L coils, that come out at .42 ohms total. Works for me. The drip tip has a 11mm bore all the way through so airflow is not a problem.
Maybe Chris can get more of the Velocity style build decks from Kanger, I know I want at least 2 more.

I have tried a lot of different builds using the Subtank mini RBA, the one that works the best for me is a SS 316L .5 build. 5 wraps around 3mm with 28g wire. Other people probably prefer something else, but everybody is different with different tastes.

I have tried a lot of different builds using the Subtank mini RBA, the one that works the best for me is a SS 316L .5 build. 5 wraps around 3mm with 28g wire. Other people probably prefer something else, but everybody is different with different tastes.

All the batteries I receive I have to charge. I have never received a fully charged battery.

I don't think I have the lung capacity to produce clouds like that, so not even going to try. After 50 years of smoking my lung capacity has gone way down.