Tam

Go nuts and get lots of different types of drip tips! I have a bunch of colored ones so I know what juice is in the tank. My favorites are the Pyrex glass and the stainless steel 2 inch pipe style drip tips.

This is where direct dripping comes in handy. With a direct drip atomizer you just drip a few drops every few draws. You can dry burn the less expensive ones and go to the next flavor. If you go this route, you'll want a bridgeless atomizer as those are easier to clean imo. You can also just rinse well and/or soak in vodka for a bit to rid the wick of the last flavor. I like to keep similar flavors in each atomizer though. Strong flavors like coffee or tobacco tend to linger so it'll mix (sometimes not well), with the next flavor you try. If you decide to do the direct dripping thing I'll be happy to help with information. There's a bit of a learning curve to it as well.

If you're more interested in flavor I'd go 60 PG/40 VG or even 70/30. That way you'll get all kinds of flavor but not so much throat hit that it'll tear your tonsils out.

All of them.

What was it about the Nautilus you didn't like, Troy? I think you're the first one who didn't rave about them that I've heard. I'm very curious to hear your take on them.

For me, the KPT 2, KPT3 and Aerotank are all good tanks. I use a single coil in the KPT3 because it performs better and is cheaper than the dual coil version, imo. The Anyvape Davide (full size) is very similar to the KPT2 but I like it better for my two mech mods. On my Vision Spinners I use the Anyvape Davide mini (old 2.5 ml version that takes KPT coils). What you might do is pick up a KPT2, an Aerotank and a Davide to see which one rocks your boat better. They're all very good tanks. I don't have a Nautilus yet but will probably pick one up to try tomorrow at the vape meet in Denver.

Asking is good! Especially to prevent face melting and eyeball destruction.

You go up a bit on wattage, vape, go up again, vape. When you start tasting the juice that's a little burnt, turn it down. That should be the sweet spot and also a good place for your equipment. If you continue to vape with the burnt taste that wouldn't be...good. Other than that, you should be fine. Just listen to your taste buds. Your device goes up to 15 watts in case you're using a coil that's high in resistance and needs that much power like 3.0 ohm or higher.

You have to work tomorrow, Troy? When are you going to the meet?

*smacks 3Rutez* Still a young pup who doesn't know better.

My first Vision Spinner in 900 mAh and 1300 mAh were both purple.

Of course it is, you silly goose! Anything purple is perfect.

Before buying any RDAs, get yourself a dedicated ohm meter. That's the most important piece of equipment you can get for building your own coils. Seriously. You could end up blowing more than clouds if you don't test every build before using it.

I use Panasonic 18650s in mine, 3400 mAh. Single, NO STACKING!

Just texted her. Hopefully, she's doing well, just busy.

Sounds like he needs to share with his lady.

*waves hands* I'll be there! BirdDog gave a definite maybe. Haven't seen Kitsune around lately. Would love to see her there. You and your lovely lady will be going, yes? What about Em and John?

Are you planning to keep all the Anyvape Davide minis for yourself?

Funny, I don't have the problem of my VTR getting hot and I use 1.8 ohm single coils in a KPT2. Just what are you doing to it, Troy???

Beautiful days with lots of time available make it that much better! Hope you had fun at the vape shop.

Yes, it will do nicely. You did very well, Charlie. I'm proud of you and can't wait to hear about your coil building experience.

Your nic level's too low, not necessarily the quantity of juices you're going through. I'd go up to at least 18 mg if not 24 mg to get you totally off the analogs. Once you've put the analogs aside for a few weeks, then step it down if you want. 6 mg is way too low.

His Signature line with the spices added are phenomenal! And those I like are not in any particular order, they're just all wonderful.

Try his sample pack. My favorites are his watermelon, strawberry, Home Canned Peaches, Mellow Spice, Spiced Apple, Apple Cider, Snickerdoodle and Cinnamon Stick -- so far.

Oh yes they can! It all depends on what you have on the Spinners (v1). Using my custom HH.357 and 50/50 juice on my Spinner and I get more vapor than my Magneto mech mod with a KPT2 with same 50/50 juice, and the latter produces quite a bit of vapor. Now, if you're talking about an RDA on the mech...well, that's a different story.