Jump to content

Wanting to try an RDA


Uncivil11

Recommended Posts

My current setup is a vapor flask 150w with a baby beast tank on top. I haven't decided which coil I prefer as they all seem the same to me however I am currently running the quad coil .4 at 42 watts Mainly just vape for flavor and nic. This is my mobile setup I take to work and driving around.

 

Typically vape the VT green apple, pancake man or a Juice for the Masses grape apple 80/20 I get locally.

 

Now for bumming around the house watching tv I feel like I would be interested in getting started with a dropper because I prefer the flavor of clean wicking. I messed around with rewicking prebuilt coils on my cleito and kanger but was hit and miss in putting it back together successfully without tweaking out the wire. I had about a 50% rate of getting it to work or throwing it away. I figured I would get a tool set with all I needed and move on to the RDA. I got the coil master after watching a lot of reviews and ended up with their V2 kit.

 

9575092e5e001a8b6af34d4edf5594fc.jpg

 

So here I am looking for something that I can rebuild/wick without creating too much frustration. Not looking into the fancy klapton twisted wire fancy this and that. Something more along a single or dual coil setup. I am wondering about trying SS to make use of the temp settings on my vapor flask. The 22mm sizeof the baby beast sits well but a 24mm wouldn't break my heart but I'd prefer the 22mm I think. I almost bought a Tsunami at the local B&M but the price was double what I remember VT having it for and just figured I would hold off until I flushed out my questions and got advice. Generally I'm not a chatter in those shops I just get what I need and leave. Any help is appreciated.

 

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Go for it!!!  Hey, I'm real new at this but I'll give you what I've got.  A dual coil build on a 24mm Tsunami is a piece of cake.  You can wind easily on a 3mm doll.  24ga SS is thick enough to make mounting real easy.  Watch this guy do a couple of builds:  https://www.youtube.com/user/DJLsbTech

Sharp individual.  Use this calculator to estimate the resistance you want to end up with:  http://www.steam-engine.org/coil.html

Once you get a decent build you will be hooked if you are like me at all. 

Link to comment
Share on other sites

I have several RDA's in my arsenal and the ones I keep going back to are my Mutation X v3 and v4.  They are relatively easy to build on, the airflow options are out of this world for both and either can do single or dual coil setups.  The Mutation X v5 looks even easier to build on.  The VT store has the v4 and the v5 available right now.  $19 for the v4 and only $5 for the v5.

Oh @Christopher...methinks the VT store is about to receive an order for a Mutation X v5 from me. :D

 

Link to comment
Share on other sites

1 hour ago, Adversarious1 said:

I might have :o

The black was already out of stock, so I bought a stainless steel.  Didn't check to see if there were more.  I promise I only bought one, though.

Ok @Adversarious1  I finally sprung for a baby beast because of your glowing recommendations... I have you to blame for parting me with my kids inheritance ...LOL  at $16.99 I couldn't pass it up. (plus $2.99 SH) but under $20 I'm not out toooo much ;)  I have a dozen or so RDA'a and RDTA'a so I just had to do something different :) 

Link to comment
Share on other sites

8 minutes ago, Edna said:

Ok @Adversarious1  I finally sprung for a baby beast because of your glowing recommendations... I have you to blame for parting me with my kids inheritance ...LOL  at $16.99 I couldn't pass it up. (plus $2.99 SH) but under $20 I'm not out toooo much ;)  I have a dozen or so RDA'a and RDTA'a so I just had to do something different :) 

@Edna if you're disappointed with it then I'll take it off your hands.  But if you're disappointed with it then you're doing something wrong. ;)

 

Link to comment
Share on other sites

3 minutes ago, Adversarious1 said:

@Edna if you're disappointed with it then I'll take it off your hands.  But if you're disappointed with it then you're doing something wrong. ;)

 

HA HA LOL:D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...