Proetus

Look to the sky you should be able to see it from Indiana! Alaska has northern lights, well Massachusetts is soon to have Eastern Clouds!

600 Batteries 50 Luc 2 bay Chargers!

100 of each 18650 Flat/Button - 18500 Flat/button - 18350 flat/button.

Soon i will be the most powerful vaper on the east coast! I will wire them in parallel and hit that hybrid!

Small coop test in the classifieds. I know i discussed it previously. Limited space available.

Small coop test in the classifieds. I know i discussed it previously. Limited space available.

There is never a need to crank down a device on your mods. If some work and others don't its generally the pin on the device itself not the mod.

ouch coulda got 100ft off ebay for $8, usually shipped same day. I'm sorry for your loss!

For starters I would recommend the hybrid elite. V2 seems to have fixed the switch issue. There is a discussion in the new products forum. That way you can check it out without dropping load of cash.

For starters I would recommend the hybrid elite. V2 seems to have fixed the switch issue. There is a discussion in the new products forum. That way you can check it out without dropping load of cash.

Your Ohms are too low on the RBA. Most VV/VW devices will not fire a load below 1.3Ω. Try making a higher Ω coil and you should be good!

The best thing i could say for a budget, and yes i know of difficulties you endure. Is to start rebuilding your protank coils and DiY Juice. 100ft spool of 30g Kanthal Wire $8ish bucks on ebay. Bag of cotton balls is 2 bucks. You have supplies to rebuild heads for years. And honestly, i haven't actually rebuilt a head in over a month, just replaced the cotton. Protank heads are real easy to rebuild, videos everywhere, and they usually outperform stock heads. This is easily the biggest expense other then juice.

As far as Juice Well Diy is the answer unfortunately. Average 30ml bottle of juice we'll call it $10 bucks, some juice is upwards of $15ish but we'll stick to 10 as its a nice round number. That 30ml bottle costs approximately 33 cents per ml. That same 30ml if you diy it, 4-5 cents a ml. Need stronger flavors, great add a little more flavoring to your liking. want a certain mg of nicotine, great make it how you like. It's Buger King in your house, you can have it your way!

Again these are my opinions, and they may not be for everyone.

Just rebuilt my first KPT coil with a 5/4 wrap. It metered out at 2.1 ohm. Woo hoo!

Thanks for the great tutorial, Rixter, it really helped a lot and it wasn't hard at all.

The only thing that you need to watch out for in ss cable is to ensure that you are indeed getting Pure stainless steel cable. Not the stuff with the galvanized core down the middle. 7x7 or 7x19 seems to the best bang for your buck wicking wise. I use a 7x7 cable in my Rsst with an ekowool hat. Note the glass tank Rocking 1.1Ω with my Provari at 4.1 Volts.

Well I assume you were smoking before you started vaping so the money you are spending is recouped quickly. Happy my wife Vapes too but wish she would take care of her own stuff. In 6 months she has filled 1 tank, while camping with her family and I was at work. She broke one T3S and just wrapped it up in a paper towel for me to "deal with" and just this morning she discovered another leaking where the plastic meets the metal and did the same lol. Good thing she is hot.

Gonna give you my honest opinion and mean no offense but I find some people have unrealistic expectations. Not saying you do but I am sitting here with a Davide Mini with 1.8ohm coil of my morning flavor on top of a standard non VV Ego battery and am blowing clouds bigger than I would ever have gotten off an analog. I did nothing other than buy quality liquid and drip it into my tank. Don't make it so complicated abd if you want big clouds but some 65-70%vg liquid. Fuzion is my favorite overall and find 65vg 35pg to be my sweet spot. The clouds are so big I get concerned it is too much at work since I am in plain view in a large glass office. No complaints in overv 6 months so I guess it's no big deal.

That's why I do not get all the wanting huge clouds personally. This is, to me personally, about maintaining a healthier alternative to smoking or tobacco products not setting a world record for a cloud of vapor. I would remind the wife and friends if you made a healthier choice that was at least same or most likely lower cost than the unhealthy choice you were making previously, like jogging vs getting stoned and eating whole pizzas, they would be proud and happy for you. How is this any different?

I'm gonna have to pick one of those up!

I'm gonna have to pick one of those up!

Okay, I think I'm done for a bit with this latest order:

6 Custom HH.357 Cisco Spec Hybrid atomizers in standard 510, matte black, 2.0 ohm

Yes, they really are that good!

Got some NI Foam coming as well. It is more used to increase wicking greatly with genny style wicks. Not so good as a wick itself. Some more pics when i get it.

I found an idea online to use a stainless steel cable as a wick. It rocks the vapor like nothing I have ever experienced before. The flavor that comes from it is better than cotton or a mesh wick. I have it setup in my RSST with a 1/8 inch diameter cable with a 1.8 ohm micro coil that is 5/64 inner diameter and just a little bit of cotton on the top under the coil as an insulator. I cut it with cable cutters to get a nice clean edge and torched the hell out of it. I wanted to make sure they did not send me something with zinc coating on it.

I have found thru trial and error that I no longer have to tip the tank to re-wet the wick at all. If I do that I am getting gurgling and it leaks from the air hole. I have to keep it below a 4 o'clock position or it will leak. This by far is the most flavorful vape I have ever had. I am only pushing it with 3.6v thru my evic and it is amazing.

I thought I would share this with everyone out there and see what others think.

Got my Genuine Kangar coils for my Evod in the mail from Proteus. OMG these are so much better than the knock off coils I've been using the past few weeks.

Big vape mail today! 200 mini Protanks V2!

Does vape mail for other people count?

Rebuilt coil as a micro coil, pointed directly at airhole.

Here ya go Rix.

Micro coil on a Genny

Gonna give it a go on my AGA-T2 this weekend.

Rip Tripper does a lot of video's, also happens to be one of the creators of the AC9 as well.

I didn't come up with this or even try it as of yet. But i certainly will on my next coil building session!

Link leads to ECF

Vertical Coils!

Example of the vertical coil..

Think about it as a super carto, This is how they are designed, but without the nanocoil.

This is on my Fogger, with cotton as a wick.