wagex

thanks i really miss yall

hows it been goin? i have been popping on the chat and stuff trying to catch some peeps so i can just chill and chat but with my new schedule its hard to catch anyone lol sorry for being away so much now i miss ya guys... jeffb....mark...O... uknow who u are :p

i guess that means mark is a yoga expert! he dont have to strain with any of the exercises lol

ah i see what ur sayin jeffb

they could also just have 2 elements inside which would create a lower resistance and more heat but other than that i never have understood how the low and high res attys work because normally with electricity more resistance more heat that is why a lightbulb filament is so tiny it gives it alot more resistance unless the attys just use larger leads on the inside or just copper leads instead of tin which would give the lower resistance im not sure i suppose if anyone had a blown one they could send me to disect so i can figure out how they do it lol

it really depends on the brand of battery and the size of the battery and the type of battery it is depending on what the protection circuitry cuts out at. but it is a good question also some people get the cut out midex up with the way they tested the mah rating such as 1 amp for 1 hour or .5 amps for an hour to get the MAH rating.

lol sounds like the highschool teacher assigned a paper to the students having them write a story about teens and ecigs and then handed it out to the media. and im sure the techer has just watched too much news

the spade and vp are great mods if u can get ur hands on one though i have never personally used one i have never heard a bad thing about them, and when the vp pt comes back out they are a really good unit too, they jus thad some technical stuff that was going wrong with it, just have a look around there is a site with all the mods listed but i cnat remember what site it is if some one wants to post it for me :p oh lol jeffb posted it didnt see it

http://www.notobacco.net/Blog/?page_id=166 states that obama uses an electronic cigarette im not sure if this is news but it was news to me feel free to move it if i am in the wrong section jeffb hehe

to get watts you take amps*volts=watts so 5 watts/2 amps = 2.5 volts id say for 5v it would be 10 watts 2*5=10 but t 2 amps for best power results, you cant 'force" amps through, they willl take wha they need, so if u used a 5 amp 5 volt adapter you would get 5 volts still and no harm done

a great place to start is www.madvapes.com go to the mod parts section and there are tutorials and everytingto get u started

what i do when my attys are dong this, i know it sounds bad... but just give it one really hard mouth draw without pressing the button (and be prepared to spit) youl hear it gurlgle once, then trake a long slow drag.... also if you had just blew it out really good... reallllllllly good... youl need to put more than 2 drops the first time, atleast 3 or 4 sometimes 5 to reprime it.... also another cleaning tip i read on another forum, the best thing they found to use whas crest blue mouthwash, sounds wierd, but he was concocting a cleaning thing and he ended up finding that it worked awesome all on its own, i think u let them soak in it over night, not sure, go over to the other forum and search around, i think it was ecf

i generally do the paper town thing to cept i blow on the battery end gets pretymuch all the old flavor out quicker though

well if the 9v batt can do 9v 1a and i looked up 9v batts and they are ~400 - 500 mah so it would be almost 3 times longer then a regular battery, but the voltage would drop to almost 4 once put under a load from the atty because of the 1a output, if you look at other sites you can find a higher rated 5v regulator madvapes has them (1.5 and 3) and even though the regulator is brining it down to 5v its only about 80-90% efficient which leaves you at about 360-450 (at 90% efficiency) mah battery life(other 10% of energy is dissapated at heat i do believe dont worry it wont get hot lol not even warm its such a minute amout of heat ), so its should still last longer than a regular battery and should work on a pt but i would just wire it like this but my pin 1 and 2 might be reversed from the actual thing i havent used a 5v reg in a while the instructions should say... :/

just make sure that if you are going to do the batteries in a series to put a 5v regulator on it, 6v most of the time requires special attys, and 7.4v (2x3.7) dotn wanna go there

i wouldnt mix the regular aaa batts with the lion batt... i would just take the normal aaa bats and replace them with bolts or something so u are getting 3.7v 2 lion bats would be 7.4 volts would fry an atty prety fast.. unless you put a 5 v reg in there some where.. and mixing the lion with the aaa is not such a good idea mixing battery types can cause extreme heat... trust me lol but it would be much safer if u put spacers (or even wires) to jump the other 2 battery slots.. but make sure if u use bolts to cover the length of them with tape or something so they dont short on the body of the light ~wags

mark from madvapes is awesome everytime i order from there he sends extra of the little fragile stuff handy incase you mess up and his shipping is top notch 2 days i get it every time shorter if i order in the morning

copenhagen i used to dip and smoke lol but i miss the taste of copenhagen anyone know of any flavors close to it? lol or how one would make it?

core2quad oc'd at 3.6 radeon 4870 x2 stock speeds 4gigs mem 780watt psu the 4870 goes into the hdd bays haha had to spread them appart to fit it sorry for crappy quality did it on my webcam lol

hmm seems like a way to make more people switch to ecigs so they will have more of a chance to regulate them, since they have their panties in a bunch over losing the last battle lol and they gotta pick on some one :p

sorry wrong part of forum : sorry guys im kinda new to this one

another thing you can do is try to clean off the batt and atty connections sometimes i find they collect gunk either from being in a pocket or just ejuice that has gathered