Kpt mini o rings

[Vispera]

I need the o rings for the top and bottom of the glass I was cleaning the tank and down the drain they went

[Tam]

Many of us use a large bowl of water when cleaning the Pro Tanks just because of this problem. No chance of losing them that way.

http://www.sun-vapers.com/buy/kanger-protank-glass-o-rings/

You can buy more here, though. Good luck!

[Vispera]

Many of us use a large bowl of water when cleaning the Pro Tanks just because of this problem. No chance of losing them that way. 

 

http://www.sun-vapers.com/buy/kanger-protank-glass-o-rings/

 

You can buy more here, though. Good luck!

Thank you gonna start doing the same

[Aquatroy]

Your not the first to do this hee hee....

[Tam]

Your not the first to do this hee hee....

Certainly won't be the last...

[Patricia]

What causes that? I have been lucky enough that it has not happened to me.

[Tam]

What causes that?

Taking the tank apart and washing all the components.

[Patricia]

Yep, I do not do that, not ALL the way apart. I'm not sure I could/would put it back together right.

[Bebop]

Yes, sometimes when you take the tank apart the seals stick to the glass and its hard to see that.

There is a seat the o-ring sits in in each end of the end caps. I just make sure the o-ring is nicely seated in there and they wont wash out easily.

Also helps not to tighten down end caps too much. They dont have to be too tight, just snug