VaporTron

Hear, hear! Happy New Year to you and your family. 2016 holds much promise so far. 

i liked my natulius so much that i bought another. figure i know they work so why change. stick with what i know works.

I think you meant VG not PG   But I do agree that you need to up the flavoring when buying a high VG juice. It is more easily done when making your own. I don't like adding water to juice because it really cuts the vapor production.
I would not use lemon juice from a store. it contains preservatives that are toxic when vaporized.

The rx200 is the generic knock off version of the dna 200. Currently it supports nickel titanium and stainless steel, but which types idk
The dna 200 IMHO is def worrh it and i just got my first one. I have an rx200 but i am about to sell it and get another dna 200!

Me either.  Well actually my budget balances out just nearly perfect....I spend everything I make....

A calculator isn't useful till you have the formula.
30 ml. / ( 100 mg. / 6 mg. ) = 1.8 ml. ,  Amount of Nicotine required.

Mr postman just dropped off the reuleaux dna yessssss! Super fast shipping i bought it 12 22 15 after business hours got it 12 26 15 wow good job myvaporstore!

Table 7 - Where different grades are used   Fatty acids- Up to about 300 ºF (150 ºC), Type 304 is resistant to fats and fatty acids, but Type 316 is needed at 300 to 500 ºF (150 to 260 ºC) and Type 317 at higher temperatures.   you can find that like on any ss info page this one is at http://www.nickelinstitute.org/~/Media/Files/TechnicalLiterature/DesignGuidelinesfortheSelectionandUseofStainlessSteels_9014_.pdf   so dont vape over 500F with 316l...and making 317l the only ss to use for wattage mode ( or over 500F )

Started making some dna 200 themes in anticipation lol they are looking groovy man

I am sure it will work for me, but not as well as a DNA200.  I picked up a couple of VTC mini's because the latest update allows users to set TCR on a few presets.  It's no escribe, but better than nothing.
The funny thing is I am really enjoying the NEBOX.  I need to buy a couple of backups, they are actually getting scarce, and going up in price.  IMO it is probably the worst TC mod I have, and it is in the bottom 50% of quality of vape of any device I have.... but I really like it!  It slips in my pocket, has huge juice capacity, the RBA is easy to rebuild, and it has pretty good battery life (at 40W)

lol...  It is the result of a combination of OCD and an addictive personality.  I have always given in to new shiny stuff.  All a vape company has to do to get me to buy it is come out with something new.  I am getting a bit more picky.  I am kinda obsessed with the small single 18650 mods.  That is what most of my mods are.  There are a few more out there that I want.  The Reuleaux is not the normal type of mod for me, but I want it.  I have just about settled on the RX200 and later the VaporShark DNA200....  but I am sure I will change my mind a few more times.

I don't want to panic just yet, but I don't think a stockpile will hurt.  I will probably trim the order down a bit.  I still have 11 VW mods ranging from 11 watts to 185 watts.  I also keep a couple mechanicals around too.  I am hoping that post Christmas sales gives me a chance stock up.

Pay It Forward
I have given away well over half of everything I have bought to people just getting started, or people that can't afford to keep their equipment going.  The hobby has probably saved my life, and if any of the smokers around me even hint at quitting, I put a rig together for them (from my spares).  So far I have only got about a 30% success rate, but I keep trying!

Most likely rxs will have tcr soon
I read wismec is no longer making the dna version and everyone on preorder for one might not get one. They are just making rxs now.
I saw one in stock so i couldnt help but to have it

Just twisted 40 foot of my .3mm 316l so is it now .6mm or just twisted .3mm? now boiling!
Pif?

Cool!  Enjoy it.
I have 2 VTC mini's, a Crown, 2 Persa 75W, and a RX200.  I just can't make myself pull the trigger.  I am trying to build up my stockpile of small mods, as I have PIF most of them.  I can't stand being with less than 5...lol

@VaporTron
I am with you on the 25R's.  I am personally going to invest a bit more in LG2's and 30Q's, but I vape at lower wattages, and use single 18650 mods. I want to squeeze that little bit of mah difference out of them.  I still have close to a dozen 25R's in rotation, so they are my most used battery.
What I do like about the 11.1 volt mods is you don't need boost. For your build, you are using 4.39V at the atty.  It is much more efficient to reduce voltage than it is to amplify it.  With my mod and a single 18650 it would have to run at 17 Amps just to get the 4.39V at the atty.  You on the other hand are only putting out 5.23A.

The whole thing with the DNA200's that turns me off is the size.  I have been looking at the VaporShark, but don't want to pay for it.  I have really had good luck with the VaporShark mods, but the $199 price tag has kept me from buying it.  It looks smallish.  When the Reuleaux came out it really caught my eye due to the shape.  I have had a few dual 18650 mods, and they all sat on the shelf.  I like small mods, preferably with removable batteries.  I keep a couple dozen in rotation, so it is much more convenient for me to swap the batteries.  I was going to pick up an RX and if I like it go for the DNA.  I was hoping Christmas, or after Christmas would bring on some good sales.  I have also been thinking about the Persa 75 watt.
I wish Evolv would come up with a DNA 60, 75, or 100 that didn't require the 11.1 volt input, but used EScribe.  200 watts is personally useless to me.  I normally stay in the 30-50 watt range with my TC mods/tanks.

Check out the wismec reuleaux dna200 awesome device and the battery life is amazing

http://www.steam-engine.org/wirewiz.asp#
I guess SS 430 is usable for TC, but from what I hear the mods that will do SS are set up for a 316l curve. If you go to steam you can download the right TC curve for a DNA 200.

Hi guys. I've been absent from the forum for a while. I fell off the wagon and for a few months, and it sucked. But I dusted off my mod and am giving it another try! So far I'm about 3 weeks cig free, and glad to be back reading about all the fun vaping stuff that I've been missing out on.

0.32 mm is 28 gauge 0.40 mm is 26 gauge a 5/4 wrap on 3mm gives me a 0.5 ohm coil, works really good in my Kanger RBA heads.

You will like SS 316L wire, I have been using it a little over a week now. Its a little softer than Kanthal, but not near as soft as Ni200 its very easy to work with. The only time I dry burn it is when I build a new coil, and then just long enough so it quits smoking, not red hot. The nice thing about SS 316L is you can use it for TC and also dry burn if you want, Ni and Ti should not be dry burned. I only have 28g SS 316L and really like it, easy to work with and no taste. I may start using it exclusively.

This is a great calculator for almost everything vaping....http://www.steam-engine.org/juice.asp

I personally am done with Sigelei.  First they quit using YiHi boards in their mods opting for IMO a far inferior product.  Now they have come out with an 18650 battery that is grossly over rated.  Sigelei 35A 2500mAh 18650 Bench Test Results...shame on you Sigelei!
I expect more out of Sigelei.

Like I say...geek factor...  I am also curious about a few different type of wires that are not supported by any other device but the DNA200.
If you get board and like super techy type stuff check out http://www.evolvapor.com/guide/story.html