Eaglewtchr
-
Posts
148 -
Joined
-
Last visited
Posts posted by Eaglewtchr
-
-
I really wish we had a better shop where I live. The employee's just don't seem to know as much as they should.
Lol, I know where your coming from. I went to my b&m to get my menthol (love their menthol) but, They are idiot's. One of the guys there has a Russian 91% and it leaks out of the air flow hole. Took it apart for him right there in the shop and had him replace the o-ring in the center of the top cap and no more leak.
Look, A noob that knows more than they do..
That felt good. Makes me feel like I am actually learning something from everyone here and able to help others..
- fishguy1123, Jeffb, Tam and 1 other
-
4
-
Does the mah rating have anything to do with how it hits? My EH is 1600 mah and my VTC4 is 2100 mah. I know the mah determines how much charge the batt. will hold but, does that have anything to do with how it hits?
-
Ok, I got a vtc4 and I noticed it hits harder than my eh 18650 with my KFL+ at 1.48 ohms. Just not sure why. Maybe someone can tell me why?
-
So, All it does is change the "feel" of the switch?
-
Ok, Everyone I know that vape keep telling me I need to get a magnet switch for my Nemesis. Ok, So what are the benefits of a magnet switch?
-
No your not. Most of the people posting info to others seem to have years of experience and i have only been doing this 8 months and ask many questions before i "try" anything. I wanna live. I just think "cloud-chasing" is cool, amazing. One day i want to try it but not untill i ask all the questions i need to ask. Even then. I dont know. Just trying to gain knowledge. I think vaping is cool and big clouds are even cooler..
-
If you like the way the kfl works, thats great. But there really isn't much need to sub-ohm it. If its big vapor you're after, then the kfl won't get you there. Its more of a device to build exceptional coils for getting the most flavor. You won't need subohms for flavor.
Cool cool. I love the flavor on the kfl+. Best flavor since i started vaping. Makes my straight menthol (no tobacco flavor) at 50/50 24 mg rocks. If i wanted to cloud chase and sub-ohm what would be a good atty to start with and still use my Nemesis?
-
With that battery, I wouldn't go below 1.1ohm
I'm looking into either a couple VTC4 or 5's. Does the KFL+ have a low ohm? I mean, If i decide (or get knowledgeable enough) to go below that will the KFL+ support it?
-
The only efest 18650 I would ever use now is the purple 35amp one.
My go-to battery is the Sony VTC 4 or 5.
Well, I checked out the Efest 35 amp and the reviews say they are a pulse versus constant power. The VTC4 and 5 have very good reviews. I am leaning more towards the VTC's..
-
Wow, I didn't know they had a 35amp. Going to check that out now. Thanks.
-
So, What is your preference? Or which is "better"? Efest 18650 or the Sony VTC4 or VTC5?
I currently have a Efest 18650 1600mah and am looking to get 1 or 2 more. It last me all day and on days off i dont really put it down.
Just need some opinion's.. Thanks.
-
One other question. What is the lowest recommended ohm coil on the KFL+? I have read 1.2, 1.0. I have also read in some google searches people going as low as. 5. I'm guessing that all atty's are made for a certain "low" ohm. So, How low can i go? Lol..
Oh, Im using a Nemesis clone with a Efest 18650 1600mah battery.
-
"Stove-piping" is when you draw from the hole in the top cap of your atomizer without the drip tip in. The danger in this is that some attys heat up pretty warm and/or can thrown hot juice splattering up onto the lips or tongue.
Ok. That's what I thought it might be but wanted to make sure. Thanks.
-
It doesn't matter as long at the legs don't touch each other and/or the coil body.
Great. It gets difficult trying to "cross" the legs. Since it doesnt mattet it makes it even easier..
-
I finally built my first coil. I used. 28ga Kanthol 10 wrap on 5/64 drill bit Cotton wick 1.4 ohms. I watched alot of youtube videos and did the simplist build. Alot of the videos showed taking the leg on the right to the post on the left and vise versa. Is that acually correct or does it matter witch leg goes to which post? Thanks.
-
Drip tip? I don't need no stinkin drip tip! Lol
I haven't found one that is as non restrictive as what I'm after. I've taken to "stove-piping" all my RDAs. It looks silly, I'll admit, but I'm getting intense clouds without one.
Ok, I'm still new to the lingo. What is "stove-piping"?
-
Welk, I don't know about the different clones out there but, I use a Nenesis clone by Tobeco and a Kayfun Lite Plus and love them. I'm running with a Efest 18650 1600mah batt. my coil is 1.4 ohms. Great flavor (sometimes too much) great vapor also. But not everyone likes the same setup. I'm thinking about going up to maybe 1.8 ohms to cut the flavor back. Sometimes my menthol is a little strong.
-
Well, I recieved my Fadora Grape today and wow. Very nice. I recieved Grape at 60/40 18mg and a sample of Grape 30/70 18mg both have great flavor kinda like Grape Shasta soda, might stand to have 1 or 2 more flavor shots to get to maybe a Grape Juice flavor. Vapor production is very good at 1.3 ohms on my Kayfun Lite Plus on my Nemesis mod. The 18mg nic isn't like other Grape I have tried. The Throat Hit isn't really there. Very smoith weather it's mouth to lung or straight lung hits. Hey, My first review. Probably not very good but, It's what i got.
-
Done and posted to facebook..
-
What mod are you going to fire the rda with.
Without going crazy you can do a dual coil at 1 ohm, Each coil would be 2 ohms 28 gauge kanthal cotton wick. Use a 100% VG base e liquid.
Now if you want real big clouds, Big air holes and sub ohm builds will get you there. Zero nicotine and 100% VG liquid.
Are your battery's up to the task of going sub ohm? 30amp IMR's like Sony VTC4 or 5's, Efest purple, LG 30 amp
Before you jump into the sub ohm world you'll need to understand ohm's law. Or at least have a site to check your ohms against the amp draw under load the battery's will see. Here is one for you http://www.steam-engine.org/#main
Plenty of videos on sub ohm coil building out on you-tube
There's also an app for android called Vapor's Toolbox in the google play store that does pretty much the same thing.
-
I cant seem to find a pyrex glass window piece for my tank. It comes with a metal piece and a clear polyurethane plastic (think that's what it is).. I want to try some juice that says they crack plastic tanks and im not sure if i can with the plastic clear tank section that comes with it. If someone can give me a solution other than using the metal tank section I would appreciate it. Don't really care for the metal section, can't see juice level. Thanks..
-
Oh, I do. It keeps me alive.Josh, I have a sinkin suspicion it didnt go well? Eagle, listen to your wife, that's a teeny bit on the dark side eek
-
I understand. My purchasing privilages have been curbed to only juices till a friend gets a custom DNA mod built for me. I've spent close to $2,000 since this last thanksgiving. I've gone over to the darkside! Lol
Well, She hasn't gone that far yet. I still get $100 every 2 weeks for vaping stuff.
-
are we married to the same person? I told her that i make the money and I can spend it on what i want, lets just say I never want to have that arguement again.
Wow, Your still alive? Lol..
First build help
in Coil Builds
Posted
Thats how I learned. Rip Trippers videos are very good. I built my first micro coil in my kfl+ using his video. He came out at 1.3 I came out at 1.48. Go figure. And get an ohms meter first. Also get a ohms law calculator and vapors toolbox for android. I use them to build my coils. Awsome apps to have.