Jump to content

Eaglewtchr

VT Member
  • Posts

    148
  • Joined

  • Last visited

Everything posted by Eaglewtchr

  1. I had been going to my local b&m and was paying 39.99 for 120ml. I was apprehensive about buying online. Prices were average with my local b&m until I ran across Vape Wild and they offer really good flavors. They charge 19.99 per 120ml of the same flavor or 6.99 per 30ml. I also use Vista Vapors, They charge 17.99 per 102ml of the same flavor or 4.99 per 17ml. Their flavors are very good also. Sent from my ALCATEL A564C using Tapatalk 2
  2. Ok, With all the FDA crap going on here's my thing.. How does one go about preserving e-liquid for the FDA apocalypse if there is one. I mean can it be frozen or what? How would one go about storing e-liquid for the future. I have been told that it has a shelf life of roughly 1 year. If that's true how would you preserve it longer? Thanks.. Sent from my ALCATEL A564C using Tapatalk 2
  3. Oh. I thought you should be able to revert back to a previous firmware, since all you are doing is replacing the files (or data) that tells it what it can do and how to do it. Could be wrong (not the first time). Anyway, No, The 0.1 Watt change isn't that bad its just annoying. And, I dunno, Why update anything past its factory wattage? Cause you can. Sent from my ALCATEL A564C using Tapatalk 2
  4. Just noticed another qwerk. When I remove my Atty it drops to 69.9 Watts. This update is weird. Sent from my ALCATEL A564C using Tapatalk 2
  5. I have the Rx200 and did the 3.10 update that makes it do 250 Watts. Now when I change my batteries it will change wattage. I run 70 Watts with a .2 ohm dual coil. I change the batteries and it jumps to 70.1 Watts. Is there a fix for this other than reverting back to the 3.0 update? Thanks. Sent from my ALCATEL A564C using Tapatalk 2
  6. Umm, another thing I have noticed is that on a unregulated device ohms law is in effect. But, on a regulated device ohms law doesn't really apply. Unregulated at. 19 ohms 4.2 volts is about 93 Watts. Now regulated same .19 ohm coil you would run with less wattage. Or am I wrong?
  7. Well, I do still have my MVP 20watt. But, It wont fire below 1 ohm. I used it with my KFL+ at 1.2 ohms. But, I haven't used either one since I started dripping. It did however get me off analogs. So, I do have a little knowledge on the regulated side. I just miss not having to drip 50 times a day. Just fill and go. Taxes are coming soon so maybe I can talk my wife into letting me get a new setup. I really like the Horizontech Arctic V8 there's like 8 different coil heads for it including a Snake, hive, and tiger coils along with SS and Ti and a Clapton coil heads. Quite a variety to choose from. And the RX200 from my understanding will do True 200 Watt without PWM over 150watt like most dual 18650 200watt mods.
  8. Ok. I understand ohms law since I have been building my RDA for the last 2 years. My SMY Kung Fu v4 box will fire down to .1 in parallel and .2 in series and has a 25amp mosfet. So as long I run .2 or above I'm safe. Just wanted to make sure that since I can't start out with a low wattage and break-in the coil like I have read about doing with a Regulated device if I run the chance of burning up the coil on first use.
  9. So basically standard ohms law is still in effect. I run a dual 22g 6 wrap 3mm coil at. 19 ohms on my RDA. That should be about 94 Watts. So if I use say a .2 coil in a tank unregulated should be about 90 Watts. The Arctic .2 coils are rated at I think 80-100 Watts.
  10. I think its the re-dripping every 15-20 minutes I'm getting tired of. I figure with a tank I could at least get couple hours before a refill. I just wanted to make sure it was safe. I have noticed that the coils are rated for different wattages. Since I have a unregulated does that matter?
  11. I have been using a RDA for the last year or so. I have noticed that Sub Ohm tanks have come a long way. Is it necessary to use them on a regulated device or can I use them on my unregulated device? I have been looking at the Herekles and the Arctic v8. I'm leaning more towards the Arctic v8. My unregulated device is the SMY Kung Fu v4 parallel/series switch box. It uses dual 18650's or dual 26650's. I think I'm getting burned out on having to carry my e-liquid everywhere. If I have to have a regulated device I have been looking at either the Reuloux rx200 or the Ohm Wrecker g2.
  12. Just placed an order on gearbest.com for the SMY Kung Fu v4. 18650/26650 Parallel/Series switch box. Can't wait...
  13. Rats. Tapatalk app wont let me post a photo. But, I finally got a Cherry Bomber wood box mod (clone). Just can't get a pic of it to upload.
  14. Well, Just left my local b&m and they are making me a heck of a deal. Cherry Bomber wood box mod, 2 LG 18650's, and an old Atty (as they put it). All for $70. They are even going to stash it for me til payday. My b&m people are good to me.
  15. I saw that one. That's why I want the wood version. Still undecided on the v2.
  16. 88vape is out of San Diego, CA. Just not sure how reliable they are. I normally buy stuff from Vaperoyalty.com. I may throw caution to the wind and order from 88vape. I got a week til payday to decide.
  17. I have been thinking about my next purchase. I'm a "broke vapor" and want a Cherry Bomber wood box mod. My local b&m has a clone for $70. Its a little on the high side for me. I did find one at 88vape.com for $33 shipped. I'm excited about that price. Now the question, Has anyone used or had problems ordering from 88vape.com? Also, Has anyone used angelcigs.com? The have a Cherry Bomber v2 for $35 that is series/parallel switchable. They seem to be the only one that has the v2. Anyway, I just need to know if anyone has purchased anything from these sites. Thanks..
  18. I have the plume veil and I put a chuff cap on it and run wide open plus negative post air flow open at .18 ohms.. Flavor is spot on for me. I've also been looking at the the Mutation X v3 or v4 for my next purchase. Not sure which. Not sure if I want under coil air flow. But the Plume is a good RDA. All mine are 28.5mm..
  19. Speaking of magnets, Does anyone know where I can get magnets for my Cartel Boss 26650? I have googled and googled and can't find any. Help, I need magnets..
  20. I have 2 efest 26650's and a Nitecore D2 charger but my batteries come off the charger at 4.16-4.17. Is that normal or is it time for new batteries?
  21. Has anyone heard of these Bestfire batteries? I saw them on e-bay but I can't find anything else about them. They have 30, 60, and 90 amp 26650 batteries. And danger from 3500mah to 6000 mah. If anyone knows anything about Bestfire please let me know. I'm currently using purple efest 3500mah 64amp batteries but there not fully charging. They are coming off the charger at 4.16 volts.. I need some new batteries but want to keep the high amps. Thanks.
  22. Well, Now it seems that Fogwind has dropped their price to 18 bucks. Maybe my b&m will match it..
  23. All I'm really wanting to know is, is it worth $35? I'm currently using a Plume Veil clone and I'm getting tired of the negative post air flow and leaking from them if I over drip. I've tried closing off the air flow for the negative post but it still has a tendency to leak. Just need to know if it's worth the money? Thanks.
  24. Does anyone know anything about this Rda? It comes with 2 barrels and 2 chuff caps 1 stainless the other delrin. The barrels 1 has 4 holes on each side the other has 8 on each side. Its a 28.5mm RDA. The only YouTube videos I found said their only con was the delrin top cap was hard to got on and the use blue o-rings and the get loose over time(week or so). My local b&m has one for $34.95. Just need some opinions whether its a good Atty or not. It just doesn't have AFC.. Thanks.
  25. Ok, I'm a little lost here. Which wicking method are you talking about? I'm unable to find the post you are talking about. I'm always looking for new wicking methods. Could you provide a link to the post? Thanks.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines