DAYVAPE

Hell has officially frozen over. I agree with DAYVAPE

I gotta check out that Mantis ! Looks really sweet man! Congrats on everything!

Very clever and so true...

That is strange. I would speak with the supplier. I know that VG e liquid does not play well with cartomizers.

Sorry to hear about your issues. Stocking enough juice is an important part of the process. You don't want to go back to analogs because of a delay, and they do happen. Try to stock a few more bottles than you are and keep on vaping!

If you need more juice options, the VT store here has some good juice- and great customer service. The vendor section here at VT has some good choices. There are also a lot of folks here that will listen to what you like and try to suggest reputable vendors based on your tastes.

Hang in there!

So, I have had to get multiple blood tests done this past year due to high blood pressure, high cholesterol, and other wacky numbers. I was even on blood pressure meds and cholesterol lowering drugs for the past few years as well (while I was smoking analogs). Well, I just went to the Doc yesterday and went over my most recent labs... and found that EVERYTHING is back down into the 'normal' ranges! The fact that my blood pressure and cholesterol are normal now w/o any meds for the past few months is quite a relief... even with my heavy vaping habit! Unfortunately, I can't say one way or another, what effects vaping has had on these results . Either way, I'm going to keep doing exactly what I've been doing lately... because evidently chain-vaping 12mg nicotine ALL DAY long isn't increasing my BP at all!

MORAL OF MY STORY: Quitting smoking is obviously one of the best things we can do for our overall health... and for me, my vaping has not affected me in a negative way at all, so I will continue to KEEP ON VAPING!

EXACTLY! I finally figured out the same thing... slide the tank down to block the air inlet and give it a couple of good pulls! Fills that carto up like a champ now! What I don't get is why am I one of those that has to do this to draw in liquid? I guess some people aren't required to do this step as there cartos stay wet enough on their own. After cutting up 10 different cartos you would think one of them would work like it's supposed too! Anyway, I'm still diggin' this tank w/ the LR Boge cartos though... and now I know I can at least get liquid where it needs to be! I highly recommend this to anyone who already enjoys cartomizers... it makes life a lot easier when it comes to keeping the filler material nice and wet. Man, I sure am glad I didn't throw in the towel on this, after I sat and thought it through it now works great! I actually talked to James from Vaporescence on the phone and he couldn't figure out for the life of him why it wasn't working for me. I had done everything exactly as I was supposed to do when setting it up but it would NOT soak up any juice from the tank. And even the one they sent out with it that was already cut didn't pull in anything! Evidently others don't have any issues with it working because all I was finding and hearing was 'how great it works, etc'. Either way, I guess I'm now satisfied w/ the Liquinator, especially since I know what I need to do for it to work for me. It's certainly much easier/quicker than popping off a drip tip and 'topping off' all the time!

Thanks for the advice though kingbtheone... at least I know I'm not the only one that has to do this to 'juice up' their carto. Hell, I just assumed that the filler was supposed work as a wick and draw in the liquid in, had no idea I needed to do 'suck it in'! I searched high and low online for tips on how to use it and could only find a few videos out there. And they were all of people praising the thing... not how to make it work!

By the way, I cut my own cartos with a dremmel and it works like a champ! Oh, and it only needs two small slots on each side of the carto, ask me how I know! I finally got pissed off enough that I took one and slotted that baby to pieces... and it still didn't work.
All it really takes is two little slits that are about 1/4" long each... until you can just barely see filler. (If you use high VG juices you may need larger slots though so it can penetrate.) Then, I take a dental pick and just make sure there aren't any small bits left floating around, and make sure the filler isn't blocked off. If you aren't careful with a dremmel, and you take too long cutting the slot, you can get it too hot and it will actually 'scorch' the filler and nothing will be able to pass through. You want to make the cut as fast and clean as possible and it will be fine. I would guess a hacksaw would work as well then you wouldn't need to worry about getting it too hot since it's not nearly as high speed as a dremmel wheel. The dremmel is just a lot more fun than using a hacksaw though... so that was the route it chose.

All in all... this 'tank' is a GREAT investment IF you are a carto user/fan!

Steppin' it up a notch!

My link

Steppin' it up a notch!

My link

Great information Sharon... I can think of a few people off the top of my head that could benefit from all of this great stuff! Again, nice find!

This is a high quality thread...

Keep me out of this you douchebag!

I got that info by doing research. I said that the 3000mah rating is legit (around 0.4A-1.2A draw), not that it's the top notch battery for E-cigarette use. Keep in mind that 18650's are more commonly used to power LED flashlights, not E-cigarettes. If a battery isn't good enough for you, then don't buy it but don't rag on my recommendation, ******-bag.

Hey there tough guy! No need to be a prick... nobody asked for your opinion on forum reply quality anyway! I honestly don't give a what you have to say... n00b! So how about you STFU and go elsewhere so you can keep on acting like you are 'all knowing', so others can laugh at you too! You come here with the attitude that this forum should be run like you want it to... believe me, you'll will not have too many 'friends' here acting like that bro. I've been around here long enough and everyone here knows me and my 'personality'... and trust me, it's not because I'm lacking anything my friend. I would much rather have a little fun here then try to tell people how they should respond to threads!

Who cares!

Keep me out of this you douchebag!

Keep me out of this you douchebag!

Keep me out of this you douchebag!

Keep me out of this you douchebag!

You have it all twisted. By the way, I did contact Dayna and originally told her it would be best if I didn't even do a review on those other liquids because I thought they weren't good.

I'm ruining her reputation and business because of a review? So, you're telling me that no one needs to express an opinion and to be honest at that? You make no sense at all.

I'm a reviewer, not a baby sitter. I don't have to point out to everyone that it's an opinion. When you read a review, it's what that person thought alone and another person could feel completely different, just as birddog was saying.

Sharon, you are lost and left behind on this discussion. I've said what I have to. If you would like to go into further detail, I'm a pm away.

By the way... A forum always needs improvement. Ask any developer, forum administrator and so on.

Keep me out of this you douchebag!

I personally pay way more attention to reviews on devices rather than juice, flavor is such a subjective thing. I do think reviews should be honestly your opinion on something, hopefully you can do that without offending the vendor or anyone else.

Seriously man... I'm really not even in the mood for you right now, pretty please!

I've only created a thread to inspire others to contribute high quality posts to help making this forum grow even larger than what it is now. That is all.

You've replied with a low quality as* hat of a response. That was very disrespectful, not funny, but plain out disrespectful.

I didn't like your reply so i figured I'd give you a minus. There is nothing immature about that at all.

Wow!! After reading through this thread I gotta say that this DAYVAPE character seems like he has serious social issues. What an ***