jjdepeter Posted May 31, 2015 Posted May 31, 2015 Hey guys. I have an iTaste mvp 2.0 and something is wrong. The display is reading NON even though I have a tank attached. Is there a way that I can fix this problem? Please help me.
Tam Posted May 31, 2015 Posted May 31, 2015 Your battery probably isn't reading the coil. Might change your coil and try again?
Earthling789 Posted May 31, 2015 Posted May 31, 2015 Welcome to VT!The error you're seeing means the device cannot detect the tank (atomizer). First thing to do is change the coil, but if that does not work, the center-pin on the MVP may have been pushed down too far to make contact with the tank. Use a tiny screwdriver and use it to gently pry the pin upwards a very tiny bit. One of these two will generally fix the issue.
jjdepeter Posted May 31, 2015 Author Posted May 31, 2015 Thank you guys. My friend just showed up and figured out the problem. Some fluid managed to get into the heating element in the coil and also on to the center pin. So he told me that I needed to remove the fluid from inside of the coil by blowing it out. I used a paper towel to clean the center pin off. Works perfectly now.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now