What's your preferred coil build?

[Tony8806]

All I have been using is dual coils and they are working great, but I wanted to finally try a different type of coil. Maybe something you guys use more often than dual coils.

[Love2VapeDaily]

i prefer dual 28ga twisted wire at .25ohm with cotton as wick

[Compenstine]

I like the Tiger Coils. 28ga round twisted with .9 flat and cotton wick

[Joshuab3687]

Simple dual micro 26g 8 wrap on a 5/64th bit. 0.41 ohm with cotton

[Proetus]

I usually run microcoils around .8-1.0 on TGT/KFL on my DNA30's. If on Provari will be 1.3-1.5 ohms.

Edited June 3, 2014 by Proetus

[Tony8806]

Just built dual micro coils. 8 wraps each coil and it reads at .7

[SteezeOG]

I keep it pretty simple. Usually a 7/6 wrap of 28ga kanthal around a 5/64 bit and I keep them offset and not centered. I like the airflow I get. I do think my new crown clone rda could work better with centered dual coils I might try that. That normal build gets me between .5 and .65 Usually around .5 if I do a 6/5 wrap and .63 or so with a 7/6. I don't want anything lower, too hot and just goes through the juice like nothing.

[DragonGunner]

28ga parallel coil-I think 8/7 wrap on a 5/64 bit gives about .7ohms. By far the best coil for my Russian 91%. This coil creates awesome clouds for a kayfun/russian and tastes great (at least for me).

Edited June 5, 2014 by dragongunner

[mvince201]

Tricro coil.

[3Rutez]

It really depends what style of atomizer I use. In my Kraken RBA, I am really liking just a simple dual 26g micro coil @ .36ohm. In the RDA, I am having great vapor and flavor with dual parallel 28g micro coils @ .5 ohm. I have yet to try all the different types of builds due to not having the free time to experiment.