Jump to content

Dozer09

VT Member
  • Posts

    27
  • Joined

  • Last visited

Profile Information

  • Location
    Florida , US

Dozer09's Achievements

Newbie

Newbie (1/14)

3

Reputation

  1. In case anyone was wondering and since Ameravape is discontinuing the Manhattan (supposedly) i did a little research and this is what i came up with. Now i own a 100% authentic Brass Manhattan Mod and i recently purchased a clone of the exact same mod. Now there are the obvious and expected difference with threading and the magnets of the clone not being quite as strong as the authentic. Still i tested both on a .25ohm coil and both with a 1.00ohm coil. The authentic with the .25 ohm had a voltage drop at about .25v and at a 1.00 coil it was a .09 voltage drop. The clone had a .07 voltage drop at the 1.00 but a .37v drop on the .25 ohm. Now before i get bombarded with how i did it. i did use one of those crappy Tobeco voltage meters and i know they are probably far from accurate but still the clone was pretty damn close. and seeing as how the clone cost me $50.00 and the authentic cost me around $220.00 i don't see where the authentic really out performed the clone at all! So for anyone who's wondering what the deal with the manhattan mod is save yourself the money and get a clone. It may not stick to the refrigerator like the authentic but really who cares about a simple novelty like that when you save $170.00.
  2. Ive had the thing for a while so i know how to use it. the batteries are fine and if it wasn't in right it would just flash red and if the batteries weren't making a connection it wouldn't flash at all....... the screws are all tight and theres nothing rattling on the inside ...... I'm just gonna have to take it somewhere or send it to innokin directly ....... looks like there will be a lot of dripping in my future haha
  3. Yea I've done it about a million times just trying to get it to do anything besides flashing the 3 colors and not turning on...... I'm pretty sure the drop killed it
  4. is there any how to videos or anything to show the proper steps to take it apart?
  5. I have tried a few different tanks, kayfun, aerotank, and pro tank mini...... none change anything
  6. So working the other day my itaste hit the floor and now its not working. When i put a battery in it flashed through the red yellow and green lights but thats it. no matter how many times i try to turn it on it just flashes those lights and then nothing. I don't know what i did or how i can fix this but its really bumming me out. Can anyone help?
  7. All i know is that i have a Manhattan Mod fully brushed brass and he wanted to em patina it and sell it for "twice what i paid" which i thought was crazy. 1. Why ruin an already excellent mod and 2. i didn't think for one second it would double the price of it. Thanks for the input lol some people are crazy
  8. So I was having a debate with a fellow vaper on the patina of his mechanical mod. Now I know that if done right there shouldn't be too much performance loss, but he was saying that a good patina on a mod increases it's value..... Does anyone agree or have proof to the accuracy of what he was saying?
  9. Just Check out ebay ..... Most mod clones in all styles and brands are there for cheap! much cheaper than most websites. Bought plenty off there including attys kanthal drip tips etc. Makes your vaping budget go much further.
  10. This is also very true too but remember not all RDA/RBA are built the same, voltage drop on mods, the builds you actually put in them etc etc etc. i have many RDAs some with sub ohm builds other with stupid set ups that i got bored and tried and some where i just need a cooler vape around 1.2ohms. i use the same nic level across the board but i know what to build and in what mod/RDA to build it in. Its a very fickle thing but eventually you will always find what it is you're looking for. Best of luck!
  11. If you do end up buying from Mt Baker use the coupon code Vaporfrombaker and it'll give you 10% off...... So free e juice past 15 dollars and 10% off ....... incase you were interested
  12. Yes but at the same time once you get your preferred build down it becomes second nature. Half the stuff i wrap and build it takes me less than 5 minutes. Premade could have hot spots and all sorts of issues as well. For me at least any time i ordered coils for an clear or kanger 30% failed, had hotspots, or couldnt handle my juice etc etc. Now if it works for you thats great and keep on keeping on I'm not trying to put anyones preferences down. I was simply stating that to ME its not cheaper.
  13. Mount Baker Vapor has really good "MAX" VG .... not quite a 100% but its close enough while keeping flavor. Plus they are very fair in their prices.
  14. kick up the VG and let me know how it goes! I wish you the best in getting off the nicotine!
  15. RDA and RBA is the way to go IMO. Better flavor better vapor its cost effective (once you're past the initial cost of said RBA/RDA) and its more fun to just play around with. I was responding to earthling saying it was cheaper than rebuilding,
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines