rbalenbin

Trident clone Nemesis clone Nmke 18650 1500mah Dual micro dragon build 28 gage Kanthal a1 10/9 wrap .7 ohms Organic cotton rounds https://docs.google.com/file/d/0BxgyMP0wxiK-cWtCcC15cExHbTg/edit?usp=docslist_api

Trident clone Nemesis clone Nmke 18650 1500mah Dual micro dragon build 28 gage Kanthal a1 10/9 wrap .7 ohms Organic cotton rounds https://docs.google.com/file/d/0BxgyMP0wxiK-cWtCcC15cExHbTg/edit?usp=docslist_api

Rubber bands or rubber gloves.

Try sticking it in the freezer for about an hour

Thought about that but since the book is cardboard and primarily a travel book I didn't think a charger was necessary

Thanks sir

My new vape-bag!

that book is proper...love it. got me thinking now of building a shelf to hang on the wall for my gear. maybe built in usb charging station. damn you people for getting the gerbil running up there...lol

Don't dry burn the wicks and don't remove the wicks unless you intend to rebuild. If you do intend to rebuild the heads do your research so you know what you are doing before tearing your heads apart.

Take the heads out of the base of the tank and rinse them under some warm water. Then rinse the rest of tank out and blot dry with a paper towel. I like to take the heads and place them inside of a paper towel and blow through the top tube to try and get the paper towel to pull a bit of the water out of the wicks. Once this is done, reinstall the heads into the tank base and you're good to go. It will take a few draws to get the e liquid back into the wicks. Some people like to do a few quick fires to try and burn off the water prior to putting the tank back together and filling it up with juice.