jlh 1741 Posted June 21, 2014 Share Posted June 21, 2014 Just got my new kamry 101. Love it. Rocking an aerotank on it now. Wanting to start building some coils. I do have an ohm meter and numerous high end multimeters. Best tank for this device is. . . and go! Link to comment Share on other sites More sharing options...
Tam Posted June 21, 2014 Share Posted June 21, 2014 You can use KPT single coils in your Aerotank. That's what I do with mine. The KPT single coils are easy to get started with building coils. Go with around 1.5 to 1.8 ohms to start. Get some experience first and then grow from there. Make sure you have the right battery that can handle sub-ohms before venturing into that territory. Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 21, 2014 Author Share Posted June 21, 2014 Thanks Tameiki! I got a couple purple efest 2500 mAh 35amp batteries. I know sonys are better but will these suffice? Link to comment Share on other sites More sharing options...
Tam Posted June 21, 2014 Share Posted June 21, 2014 They will, but my personal preference are the Sonys. Good to be safe...and less painful too! Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 21, 2014 Author Share Posted June 21, 2014 I wont be sub ohming anytime soon so I shouldnt have any issues. Like u said, 1.5 -1.8 ohm and I will be good. Tam 1 Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 21, 2014 Author Share Posted June 21, 2014 Was just holding my mod znd noticed it was getting hot. Battery crap out? possible reasons? Link to comment Share on other sites More sharing options...
Tam Posted June 22, 2014 Share Posted June 22, 2014 Have you been chain vaping? Dual coils get hotter than singles. Also, take your battery out and check for any irregularities. Try another battery in it to see if it heats up too. Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 22, 2014 Author Share Posted June 22, 2014 I had it in my hand and just barely had the fire button depressed. Just enough to cause it to heat up. I immediately switched batteries and inspected the offender. Other than melting a lil tiny bit of the wrapper on the negative end of the battery it seemed okay. Volt meter still showed it to have 3.7v. It came as quite a surprise and served as a reminder to keep the button locked when not in immediate use. Haven't had an issue since. Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 22, 2014 Author Share Posted June 22, 2014 Got a Tobh, some kanthal and organic cotton. Going to take a stab at building a coil tonight. Link to comment Share on other sites More sharing options...
jlh 1741 Posted June 23, 2014 Author Share Posted June 23, 2014 Success! 1.35 ohm coil w space jam andromeda! Hits like a champ! Link to comment Share on other sites More sharing options...
Tam Posted June 23, 2014 Share Posted June 23, 2014 Congrats! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now