AshtonAshton Posted December 1, 2013 Share Posted December 1, 2013 So my vision Wolnt connect to my charger? When I try to twist it in it dosent twist in? It just keeps spinning and dosent connect, the other day I got it to connect and the light turned on and charged, but today when I tryed to do the same thing and it connected the charging light wouldn't come on, the only way it charges now is if I push down on the charger and manually hold the charger pushing down into the battery for it to charge Link to comment Share on other sites More sharing options...
Compenstine Posted December 1, 2013 Share Posted December 1, 2013 (edited) Sounds as if the leads inside have broken. Could just be that you need to pry the center connector up a tad on the charger, not much just a very little bit. Looks like it needs cleaned as well. Could just be dirty and not making a good connection. If the connectons are broke you could try opening it up and re solider them or just get a replacement. Edited December 1, 2013 by Compenstine Link to comment Share on other sites More sharing options...
AshtonAshton Posted December 1, 2013 Author Share Posted December 1, 2013 Sounds as if the leads inside have broken. Could just be that you need to pry the center connector up a tad on the charger, not much just a very little bit. Looks like it needs cleaned as well. Could just be dirty and not making a good connection. If the connectons are broke you could try opening it up and re solider them or just get a replacement. thanks! And how would I pull it upward what kinda tool would I need? And is their a video on how to fix it somewhere? Link to comment Share on other sites More sharing options...
Compenstine Posted December 1, 2013 Share Posted December 1, 2013 Just use a small jewelers flat head screw driver to pry it up a bit. Just a wiggle is all that is usually needed. If that don't do the trick and cleaning don't help then as a last resort take it apart and check the connections. If you are un sure how to solider it don't just replace it as it is not that easy. All you need though to take them apart is small jewelers Phillips head screwdriver. remove the 4 screws and open it up you will see if the wire/s has/have broke loose from the connector. Don't know of any vids on that. I have had to do it to a few when I had my B&M open though. Link to comment Share on other sites More sharing options...
AshtonAshton Posted December 1, 2013 Author Share Posted December 1, 2013 Just use a small jewelers flat head screw driver to pry it up a bit. Just a wiggle is all that is usually needed. If that don't do the trick and cleaning don't help then as a last resort take it apart and check the connections. If you are un sure how to solider it don't just replace it as it is not that easy. All you need though to take them apart is small jewelers Phillips head screwdriver. remove the 4 screws and open it up you will see if the wire/s has/have broke loose from the connector. Don't know of any vids on that. I have had to do it to a few when I had my B&M open though. mate not trying to sound weird but is their anyway you could maybe Skype me as I try and fix it? For like a kinda walk through on how to solider? If not can you post a picture guide I would greatly apprechiate it! Link to comment Share on other sites More sharing options...
Compenstine Posted December 1, 2013 Share Posted December 1, 2013 (edited) Not weird just wondering if you have what you need... You will need a soldiering pen, solider, flux and a very steady hand. Check PM Edited December 1, 2013 by Compenstine Link to comment Share on other sites More sharing options...
AshtonAshton Posted December 1, 2013 Author Share Posted December 1, 2013 Not weird just wondering if you have what you need... You will need a soldiering pen, solider, flux and a very steady hand. Check PM can I pick both thoes up @ a hardware store? Link to comment Share on other sites More sharing options...
Compenstine Posted December 1, 2013 Share Posted December 1, 2013 Radio Shack is the best place. You can yes sometimes get the stuff at a Hardware store. Link to comment Share on other sites More sharing options...
Aquatroy Posted December 1, 2013 Share Posted December 1, 2013 Cheaper and less time consuming is to just go buy another one... Proetus, wizard46304 and spydre 3 Link to comment Share on other sites More sharing options...
Proetus Posted December 1, 2013 Share Posted December 1, 2013 Cheaper and less time consuming is to just go buy another one... So true! You'll spend as much on a soldering iron then a new one. wizard46304 and spydre 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now