Jump to content

chud

VT Member
  • Posts

    29
  • Joined

  • Last visited

Profile Information

  • Location
    New Orleans

chud's Achievements

Newbie

Newbie (1/14)

4

Reputation

  1. Since you didn't soak the wick you need to wait a little while befor vaping so the juice can make it to the coil.
  2. I just built my first RDA (omega). I used 28 gauge on a 3mm screwdriver, did 7 wraps, dual coil. IIt ended up being .86 ohms. You definately need an ohm reader so you can be sure your build is correct. I'd suggest starting at a higher resistance. A B&M built my first one at .3 ohms and it was unvapable (way too hot).
  3. Ha...they definately aren't that big.
  4. It was an omega clone, which had 2 really big air holes stock. Still really hot though.
  5. I got my stuff in today. I went to the local vape shop and had them do my first build. They built a .3 ohm dual coil. In the shop when I hit it it was pretty harsh, but I enjoyed it because of fhe amount of vapor produced. Got home and vaped it a little more and it was just not tolerable, way too harsh. It wasn't the nic content (4mg) but the heat of the vapor. That vapor was ridiculously hot. After hitting it a couple times the atty would get really hot and drip tip would almost burn my lips. I put a longer drip tip on that I have, but still couldn't handle the heat of the vapor. I tore that one apart and built my own coil (only had one piece of ekowool, mine amazon order has yet to arrive). It ended up being 1.3 ohms and is much more vapable (ill probably build one a little lower next time, closer to 1). Maybe I just needed to get used to the subohm, but I don't see how anyone could vape like that.
  6. Probably more in it for the flavor, for clouds I could use the omega from what I've heard. I don't mind spending some money, just don't wanna get completely ripped off.
  7. Thanks for the info... The magma paradigm looks awesome, but its $115. I may pick one up once I'm sure I enjoy building coils and dripping, but that's a good chunk of change to spend having never even tried a dripper. Anyone make a decent clone of it? Any recommended patriot clones (I know hcigar has one)? Should I stop being cheap and just buy the real thing? If I go to an ecig store and get an RDA will it be the real thing or will they sell me a clone for the price of a real one?
  8. I should be getting my first mod and RDA (hcigar nemesis and omega clone) in the mail tomorrow. I've been vaping on EVODs, ego twists, and vision spinner 2 for a couple months. My nic level is 12 mg now. Thru my "research" watching numerous YouTube videos I've heard I need to lower my nic level. The problem is I already have ALOT of 12 mg juices (I also have a few 6mg juices). One person said you should use no nic juice. Is this only for sub ohming, since you get so much more vapor? I'm going to try and build my first coil around 1 ohm I think. I may just do a single coil at first, to get a little higher resistance, then add a parallel coil after I've used it a little while to lower the resistance. If anyone can share their experience with nic level and RDAs I'd appreciate it. Slightly off topic... After I purchased the omega I read some reviews saying its not the best for a beginner due to it being a little tricky build because of the high walls. Anyone have opinions on a better RDA to get for a beginner?
  9. I like to change flavors pretty frequently. It seems like to rewick with the wick I got I will have to build a new coil. Would it be easier to use cotton balls?
  10. So, after making this post I decided I had to have the hcigar nemesis. I figured I'd go ahead and get the stuff to make a RDA, I know at some point ill want to try. I got an hcigar nemesis and omega RDA, 28 and 30 gauge wire, ecowool wick, ohm reader, Sony vtc5 batteries, and a charger. I'm pretty excited, should have everything in by the middle of next week. Any tips or suggestions before I get started? How long can I expect a coil to last? Thanks
  11. Are all dripping atomizers rebuildables?
  12. I started vaping a few months ago with and EVOD glass starter kit. Next, I got an ego twist, vision spinner 2, and a few different tanks (aerotank mini, miniprotank 2, and an aerotank). Now I've gotten to the point where I would like to get a mod. I saw a post where someone mentioned the hcigar nemesis mod which looks like something I'd enjoy. I like the size/shape/price, not positive about the button position though. I don't think I feel like doing the whole rebuildable thing, and know very little about atomizers. Just wondering if anyone has any suggestions on where to start with this. I assume I will need the mod, pretty sure my aerotank will fit it, but would also like to get an atty (is this dripping?). I don't mind spending some money. I realize I'm going to need a few things, but would rather not spends hundreds of dollars on a mod. If anyone can point me in the right direction I'd appreciate it. Thanks
  13. Thanks... Ima dummy...there was a rubber thing on the coil I was supposed to remove. These batteries sure do hit good, and I finally got some good juice!
  14. I just got an ego twist and vision spinner 2. They did not come with chargers. Can I use my evod2 glass charger? Also, one of the tanks I ordered isn't working. It's a KangerTech T3d, is this not compatable?
  15. I found a site that sells evod starter kits (2 tanks, batteries, 5 coils and a charger) for $29. Ill probably just get a few of those, doubt ill find anything less expensive.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines