bloombloom88

Yeah I think I'm gonna get rid of mine. I'm tired of screwing with it

For about a week now I've been wrapping a few coils and have been getting burnt hits after it sits without vaping for 20 mins or so.. Well I got real tired of it and decided to be creative. I turned my protank into a drip tank! First I took silica wick and wrapped a 1.6 ohm coil around it, doubling up the wick where the coil is wrapped on, then stuffing the edges and left the chimney off of the head as shown below. Depending on how long I drag, I'm getting about 10-15 hits before needing to re wet. I just unscrew the tank drip and carry on I just did this about an hour ago, I'll update how this turns out after a days use

this is a GREAT idea!

I'll give this a shot. Am using about the same amount of cotton as the wick, am I suppose to use less?

So I've wrapped a few coils now for my kpt but I'm having an issue.. First off, they are 2.2 - 2.3 ohm coils with a 5/6 wrap if I'm not mistaken with 32g wire using a 5/64 drill bit. Vapor and flavor is 10x better but here's my issue. After it sits for 15-20 mins without vaping, my next hits are really burnt. Almost like the cotton is dry. It eventually goes away but damn it sure is getting in my nerves.. Battery is at 7.5-8.0 watts and I did my best to get the coils as close to each other but they are still spaced, I've only built 4 soo far. All are having this dry hit issue. Am I doing something wrong? If more info is needed ask away and I'll try to help as much as I can, thanks!

I'll be trying this tonight as well, I'm also going to be rebuilding a few coils for my kpt for the first time

I've also heard you need to or should use organic, why is that? Is that sold at drug stores?

So if I run a 1.8 ohm coil vs a 2.2 I'll gain a little extra run time on my battery? And do you know how many wraps I need to get 1.8 to 2.2?

I'm going to pick up a coil and mini torch after work today and attempt to make my first coil tonight. Has anybody made a 2ish ohm coil for the kpt? I need to know how many wraps to make. Also, if this could be answered one more time is appreciate it.. The higher ohm the less resistance and less power it needs correct?

I guess I'll just buy a new coil and see if the problem still exists. If it does I'll probably get rid of it

Well that's great to hear..

I'm assuming it does not come apart, if it does it's REALLY pressed on there. I can't even get it to budge

No it doesn't look like it's removable like my pro tanks

Removable chimney?

This head doesn't have that silicone cap like my kanger tanks do, so what's the best way to keep the cotton from moving?

Great! Guess I'll be buying a new coil and give it another shot. Thanks for the help! I'll report back and let everybody in this thread know if it fixed my problem

With using twice as much juice keep me from taking long drags, will it cause this "flooding" like I've been told? Or should I be able to vape like I do on my other single coil tanks?

So could the coil that comes with the tank be causing all of this? What about what I was told, is that correct with dual coil tanks?

I bought this tank about two weeks ago and have not been able to use it. As soon as I took it out of the box, filled it up and attached it to my battery, it floods. Fluid comes out here.. It leaks onto my battery where the coil makes contact as well. All o rings have been checked and look like they are in good shape. Whenever I start to inhale the fluid spits up and ends up in my mouth and not just a little fluid, it's a good amount. No fluid was dripped down into the center tube when filling the tank, I'm very careful with that. I took it back to where it was purchased and they told me because it's a dual coil unit it uses twice as much fluid and if I take too long of a drag it will flood.. This doesn't seem right to me. I literally have not been able to use this tank, it floods EVERYTIME I try to use it. Is there something wrong with the coil that could be causing this or is what they told me correct? FYI the picture taken is of my pro tank, the iclear is in my truck and didn't want to grab it just for a picture lol Thanks in advance!

Thanks for clearing this up for me!

Is the voltage of the battery regulated? When I take it off the charger on a full charge, I hit the plus and minus buttons, it shows the ohms of the coil and then shows v4.1 and through out the day that number drops until it needs to be charged again. I'm confused lol This also brings up another question.. When showing the ohms of the coil, it has an A in front of 2.3 for the 2.2 ohm coil I'm using. Why does it say A and not O for ohm? Thanks in advance!

Thanks for the greetings everybody!

Sour watermelon from a local vape shop. I love it!

I 2nd this. Tons of info thanks for all of the replies guys!