iheartvape
-
Posts
829 -
Joined
-
Last visited
-
Days Won
4
Posts posted by iheartvape
-
-
I did find the culprit of all my issues (aside from it not being authentic... Lol) bad ground! I don't think they tapped the hole deep enough so the screw for the ground even though its as tight as it gets doesn't snug down the ground all the way.
-
It finally arrived! Had the wife open it and take a pic of my new panzer Blackhawk clone and omega clone. For some odd reason the fire button had unscrewed itself. I confirmed with the wife that yes the pin is rattling around inside.
Oh and I haven't even laid my hands on it yet. Hopefully I will be home Saturday
If your omega is like mine the top cap will be very loose and its gonna drive you nuts!
-
I get accused of being obsessed as well. I have about 13 mods and about 10 tanks (RDA/RBA, etc), 20 various batteries of different sizes, 1 roll of each guage of wire, etc. Im not even allowed to go to the Vape Shops anymore if my wife isn't with me, cause I will easily drop $200 on stuff my wife says I don't need...
-
Yeah I'm just waiting for the main board to come loose now. I picked up some epoxy and got the mini USB back in place, but its a rubber epoxy so I'm pretty sure it won't hold for long.
-
Like the mod. Looks sweet. Let me know how the juices r. I'm always looking for new flavors.
The unicorn milk and sugar bear are really good! The monster melon other then test at the store I haven't tried, the organic stuff is no bueno for me, or I need to rebuild my coil.
-
Here is what the inside looks like....
-
The housing from what I can tell is pretty much 1:1 I have never held an authentic Hana though so not 100% sure
-
Really my main issue is just how weird it acts with a fresh battery... It likes to throw the Check Atty warning ALOT.
-
Haha I forgot to write what I got.. Lol... ONI Mech Mod, Unicorn Milk, Sugar Bear, and Monster Melons by Cuttwood, and a bottle of organic juice called Creme Caramel by Virgin Vapors
-
Right now I'm vaping some unicorn milk by cuttwood
-
Does the DNA 20 clone require you to press the fire button to wake it up out of hibernation, then press it again to fire it? I read about the DNA 30 having that problem but it might be unrelated to the Chinadna 20 chip.
Yeah it does but it doesn't bother me, you don't have to push twice it just won't fire till it wakes up. I usually hold the button for a sec before taking a pull anyways.
-
Made a run to a new local B&M called Gold N Vaporz and picked up a few items.....
-
So I finally received mine, and after only 2 days this is what I have to say about this clone from FT.... DONT WASTE YOUR MONEY!
It looks good, but that is about it. Barely 24 hours into having this, the mini USB port broke free from the epoxy that was holding it in, their is something either faulty with the wiring connections or the board itself, it will randomly detect my atomizer as like 4 or 5 ohms which will adjust the voltage output based on my wattage setting to something super high, resulting in a super burnt taste, thats when it actually wants to detect the atomizer at all.
I think for a mod like this, the only route to go would be authentic. (that's something I NEVER say, so that should tell you something about this clone)
-
Stay safe over there I spent 2 years in that litter box was in Ramadi, Fallujah, Baghdad, and Haditha from 2003-2004 then 2005-2006
- Joshuab3687 and DragonGunner
-
2
-
He did nail it though with the thing acting like it goes into unprotected mode near full discharge of the battery. Cape starts to suck then the "check atomizer" indicator pops up. I did throw away the batt it came with it came with a 2000mah efest that I think is also a knock off since they misspelled the word "rechargeable".... Lol
-
Mine isn't the DNA 30 clone its the DNA 20. I do like the DNA 30 better though the 20 you can't use a ohm resistancy less than 1.0 ohms and the well for the 510 connector is deeper.
-
Not really much advice here, as everyone's taste is different but I would try a dual double twisted 30g or a 28g twisted with 32g at about a .7 ohm build and use a little less cotton in your rda (meaning dont pack the deck full of cotton) then close your airholes a little. In my opinion and experience with vaping and rda's, the more air I have; the less flavor I have. (more air equals bigger clouds, less flavor; less air equals more flavor, less cloud)
-
Wow... LOL... The Nautilus also has a little overflow chamber kinda thing down in the base. Just remove the coil, and use a cotton swab and remove any excess liquid from down there, and do the same on the batteries 510 connection and you should be good for a bit.
-
Yeah I'm using my kayfun right now... Lol
-
That sucks bro.
-
Just make sure you check your ohms after you build your coils, and you will be fine. Other then that, it's a real fun habit/hobby for us tinkerers... Lol
-
Is there no way to repair the screen and cable or is it toast?
-
Current not cruelest lol
-
What's the Hana Modz clone like, IHV?
Aside from a little blemish where it looks like it was dropped on the corner of it, i am really impressed. It does come with a battery installed, even though originally FT website said it didn't. I haven't opened it up yet to look at the battery but I'm sure it's a crap battery so I'm gonna replace it when I run the cruelest charge down.
Bump when you get something in vape mail.
in General Vaping Discussion
Posted
Got my 100ft roll of 28g and new cutters in the mail today