Jump to content

Sharon

VIP Member
  • Posts

    1,350
  • Joined

  • Last visited

  • Days Won

    7

Posts posted by Sharon

  1. Eminent Vapor

    Clark - 1-609-375-8273

    221 Westgate Rd

    Egg Harbor, TWP New Jersey

    snjvaper@gmail.com

    He is very very close to Atl City, NJ. Maybe he will answer the phone or your email. He is a juice vendor and his juices are excellent.

    Good Luck

    Robert Clark Jr

    221 Westgate Rd

    Egg Harbor Twp, NJ

    1-609-375-VAPE

    info@eminentvapor.com

    Robert Clark Jr

    221 Westgate Rd

    Egg Harbor Twp, NJ

    1-609-375-VAPE

    info@eminentvapor.com

  2. Click Through Rate. The % of people who come to your website and click on an ad. That's how one makes money. Jut wondering what other people's experiences are. I was in chat once and I heard some folks talking about this so I thought there would e some out here who could hep.

    Sorry I can't help Cheryl! This is just one prime example of how I know very little about a lot! LOL

  3. I also run a piece of dental bridge floss through mine. You can buy it at any Walgreen's pharmacy. It's like a flexible pipe cleaner but smaller in diameter so it fits through the air passage way. It gently pulls all the build up off the coils.

    Jay, thanks for reminding me about the dental bridge floss! I have gotten back into using cartomizers since discovering the Mega Dual Coil's cartos. I was down to one a few weeks back and waiting for an order to come in. The coils were gunked up to the point that I couldn't see light through the center and for the life of me I couldn't remember the floss trick.

    @Jen, there are so many different ways to clean cartomizers. Do a google search and you will be amazed by all the videos. I have tried the boiling in water and I even purchased a Ultrasonic Cleaner. IMO the way that has worked best for me is to flush them out with hot water from the faucet, blow out as much of the water that I can. Then submerge them in Everclear over night. The next morning I blow out the everclear and give them a couple of good wrist flicks. Then I set them in front of my laptop exhaust fan for the day. Since my laptop is in use for the majority of the day, by the end of the day the carto is completely dry.

    Now for the easiest thing to do. Keep your cartomizer wet with juice by topping up when needed. If you use thin, light colored eliquids that are not super sweet, a cartomizer will be good for 5 days or more. If you use thick, dark colored, and/or super sweet juices, your cartomizer coils are going to get gunked up and their life span will decrease. When your cartomizer has reached its maximum life expectancy, just throw it away. :yes

  4. Hi Hurrycaine, How are you?

    Here is Hanna's "How to" video. http://www.youtube.com/watch?v=SW--6MzQoRI&feature=feedlik I have been using them for the last seven weeks and I love them. I make sure to keep it wet and use short quick draws. The way the .357 is designed it creates a vacuum each time you draw and it pulls the juice from the medal wicking into the ceramic cup. I was fortune enough to follow Hanna from his first interview (post production) until today. I had been pretty much coached on how to properly use it before it arrived on my door step. Knock on wood, I have yet to kill one. Sean, Hanna's friend and now his QC man, has used one .357 for 10 months and the only reason it was 10 months is because he gave it to someone else. The flavor, TH, and vapor is absolutely amazing. The first day I received my initial two, after two top offs, it was working like a fright train. I cleared my schedule for the day and from 10 AM I vaped non-stop until 2 AM the next morning. I must have tried every e-liquid I owned. The juices I loved prior to the .357 I loved even more. The juices that I liked, but wasn't necessarily in love with, I love now. I have vaped with 80/20, 70/30, and 50/50 and have had very good results. The only juice I have had problems with had water as one of the ingredients. Water will cause the atty to spit and spew the juice. Make sure you use a long drip tip in case this happens to you. I would not think a medal drip tip would not be a good idea, since the atty gets very hot. I would imagine it would cause the medal DT to also get hot. As per Hanna and my own experience, dark, super sweet e-liquids cause the coils to get gunked up much quicker. If you happen to be using either dark or sweet juice, it would be a good idea to blow them out daily and drop the atty in Everclear for an hour or so more frequently. After giving mine an Everclear soak, I blow out the atty, flick it a couple of times and drop a couple of drops of plain 50% PG & 50% VG if I am going to give it a rest. If not, I just put it back on my PV and start it back up again. Prior to the HH .357, the only time I dripped was when I was trying a juice for the first time. Now, with the .357, all I want to do is drip. I have gone from a devoted fan of the eGo Tank System to DD'ing 50% of my day. When I am not dripping with a .357, I am using a 5ml Mega eGo cartomizer. All of my .357 atty's are 1.5 ohm. I either use them on my eGo 1000 mah (which Hanna recommended) or my Pearl AV at 3.4 v. Like any LR atty/carto, it drains my battery quicker than a standard resistance. I want to get at least one 2.5 ohm so I can try it on my 5v mods. At $22 each, and the potential to last several months, I don't want spend a lot of money getting every ohm they come up with. For times when it is not convenient to drip, I have gotten one of the Drip-on-Demand Kits from COV. It is a great companion to the HH .357. It does get a lot of attention when I am using it in the car. Basically it looks like a small weed pipe sitting on top of my PV, LOL. Hanna and Cisco are coming out with another "How to" video in the very near future to address some problems customers are having using this atomizer. All I can say is that once you get the hang of vaping with this atomizer, you will be spoiled. Just ask Rip Washington, he has been using one for about two weeks now. I also want to say that the Vapage 510 Hybrid is not the same atomizer as the HH. 357. The HH .357 is made with Cisco's LR 306 specs. Cisco provides Hanna with the necessary parts and Hanna and his wife Kat, make each .357 by hand. Then it goes to Sean, who tests the atomizer and primes it. The finished product then is sent to Cisco to sell on his website, AvidVaper.com. The reason they sell out so quickly is because they are not mass produced and Hanna can not make them any quicker without sacrificing quality.

    I hope this has helped you. If you have any additional questions, just let me know.

  5. UPDATE UPDATE UPDATE UPDATE

    Due to the pending weather conditions, the August Vape Meet-Up has been postponed to next Saturday Sept. 3, 2011

    It will be held at the same location: 119 S. Duke St, York, PA 17401, and the same time.

    If you have already RSVP'ed for today and cannot make next Saturday, please visit our website: www.WhiteRoseVapersClub.com and leave a comment on the Event Page.

    We are sorry for any inconvenience this last minute schedule change may create. Better safe than sorry!!!

    If you have any questions, please email Brandon at: info@whiterosevapersclub.com.

    Thank you,

    Brandon

  6. I will be bringing a brand new vaper to the meet on Saturday. She is also in a little tough financial position at the moment, so i will be giving her my old Smoke 51 setup to get her started, but if anyone has any "retired" equiptment that they are no longer using and would be willing to donate, it would be appreciated. If i can get her a 510 set up of some kind...i can hook her up with atties, cartos, juice and all the goodies, but i dont have a 510 battery/charger of any kind that i can spare at the moment.

    Thanks,

    Dave

    Dave, I know I have a set of stick batteries and a charger that will take 510 connections. If I am not able to make the meet Saturday, I will send them with Bill.

  7. Deal of the day: Boge LR 510 cartos for about half that price... ok, $1.20 each.

    Boge 510's: http://shop.goodprop...0&categoryId=34

    Here are the GP branded ones... not sure who makes them.

    They are the gold threaded ones... which i don't prefer.

    Never tried them... cheap though!

    Hey DayVape, VaporKings still has the bulk option for the Boge carto, reduced price for 10 or more. Plus the discount code VTALK15 for 15% off. After shipping, it comes out to about $1.02 per carto.

  8. White Rose Vapers Club August Meet-Up

    Saturday August 27, 2011 5:00 PM

    Sorry for the delay in posting this month, it’s been a busy month!

    Since the weather is nice, we are having the August vape meet-up outside. Rob and Kelly, from Blue Mist Vaping, have invited us to their home this month. The address is:

    119 S. Duke St

    York, PA 17401

    The location is basically right around the corner from where the previous vape meets have been held, Cobblestone’s Restaurant.

    Rob and Kelly will be providing the grilled items. We have been asked to bring a side dish, dessert, or any picnic fare to be shared and whatever you would like to drink (alcohol or non-alcohol). Rob & Kelly have some chairs, but more are needed. So if you have chairs you can bring, it would be greatly appreciated. Also if anyone has a canopy that we could use for shade or cover if it rains, please contact me at the email below. We are still working on the parking details, so please check our website, before the meet, for more information. www.whiterosevapersclub.com

    I am asking everyone to RSVP. Since our hosts will be providing the grilled food, I will need an accurate headcount. Also, the White Rose Vapers Club has grown the last couple of months (Yeah!) and we may need to find a new location to accommodate our size. If you know in advance you will be attending, please remember to RSVP every month. I am not saying that if you do not RSVP you cannot come. We want everyone, who can make the monthly vape meets, to come and enjoy themselves.

    If you need more info please contact info@whiterosevapersclub.com

    Brandon

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines