Vapor423
-
Posts
8 -
Joined
-
Last visited
Posts posted by Vapor423
-
-
What brand of wire are you using? Is this something you bought at a vape shop?
Yeah I told them I needed 32ga kanthal and I guess they gave me the wrong stuff me being new to this I didn't know but I ordered some stuff this time instead of goin to the vape shop I ordered 100ft of 28ga and 32ga
-
The wire description is D=0 32mm 18ohm/m
-
I've already used all my wire up I'll pick some more up and give it another try
-
So I used steam engine and put all the information in and told me 7 "full wraps did all that and it's reading 0.7 I don't get what I'm doin wrong
-
It won't fire anything under 1.0ohm so I'd like to hit about 1.5-1.8ohm
-
I was doin 8 wraps on 5/64 bit comin in at like .8ohm?
-
So I've recently gotten into rda/rba building and I picked up a kangertech ipow2 today with a smok rba and I'm tryin to set up double coil and I cannot get over 1.0 ohm with double coils. I'm using 32ga wire but I have 28ga also. I'm runnin 15w max I can. Any help would be appreciated.
How many wraps?
in Coil Builds
Posted · Edited by Vapor423
Well I'm sure no one cares but I'm pretty stoked lol my order of actual 32ga kanthal a1 came in and i did the calculations on steam-engine I used a 3/32 drill bit wrapped 7 times and come out to 1.4ohm total on dual coils. I also built a 32ga twisted single coil using a 3/32 drill bit 5 wraps comin to 1.7ohm. I get more vapor and taste from the twisted single coil. I'm using a kangertech iPow 2 on 15w. Now I just need to work on cleaner wraps and get a bigger variable wattage box and I'll be happy. Thanks guys