Raptor Vaper

Are you on your phone? Tapatalk let's you add photos easily. Click here This menu will open

It sounds like a wicking issue. I agree with previous posters

Every week or even days I'm not too busy I'll build one vape it, love or hate it. Rebuild rebuild rebuild. I re-wick if I'm changing from a fruit to a tobacco but if I go from a fruit to a fruit flavor I just take the top cap off and fire it to rid the excess juice (right to before the point it becomes to dry and burns) then re-drip it Current igo-w6 build I had to share, pretty happy with it. .08 ohms.

I've been down to .16 for several days and after chain vaping, the only thing that gets warm is the RDA. After chain vaping, I took the Efest out and it wasn't even warm.

I haven't heard of this until now, I need to do some research! In the mean time, I'll order up some Sony vtc-5's. Wow. Rewrapped? And I definitely don't want my nemesis turning into a loaded gun.

So far so good buddy! No issues. Any tips? I've done hours of research and experimenting

That battery could go down pretty low! The vtc-5 right?

What's the discharge rate on the Sony? .1 ohm at 3.7v is 23 Amps, not counting voltage drop. Right?

I've been building this low on my efest batteries for several months. .1 is the lowest I've been with no issues. They are efest 18650 35a purple batteries

I've got 28 gauge and 32 gauge as well! Thanks for the input bud

Hey guys, loving the RDA scene. My favorite size wire to run is 24 gauge. With the hole size in my posts on my caterpillar RDA, I cannot build a dual coil in it unless its a sleeper coil (one continuous wire). I'd much rather find an RDA that is capable of holding 2 24 ga wires in the center positive post. The reason I don't like building sleeper coils is because its very difficult. Here's the best I could do. Vaping 100% VG margarita flavored. .16 ohm build. Caterpillar RDA organic cotton, efest 35A battery, EHPRO Nemesis So my question is, what RDA do you guys recommend to house 2 24ga wires in the center positive post? Thanks in advance!

Glad to hear you made the switch! I smoked for several years and I am never gonna look back...

Welcome! Thank you for your service!

Awesome buddy! I looked but I couldn't find this forum's rules. I'm on tapatalk as well so it can be difficult to locate rules

Thanks guys! I'm glad I made the switch and chose the right forum! Also, how do I post in the cloud chasing forum? It wouldn't let me

Hey guys, my name is Calder. I smoked for around 3 years and it got old not being able to smoke in my truck (I want to keep it nice of course) and not being able to smoke in the house. I started out with an evod started kit, soon upgraded to an innokin iTaste VV with an aerotank up top. Recently I've gotten into to rebuildables and cloud chasing. Running efest 18650 batteries with a 35a discharge rate. Its been very interesting learning about ohm's voltage, watts, and amps. I have been super safe when performing and using any of my builds. My best build metered out at .11 ohms. I have a nemesis brass mod, IGO-W6 quad coil and a Smok Caterpillar RDA. Loving dripping very much. Its become a hobby which is good because it helps prevent your mind from thinking about that next nasty cigarette. I started vaping 6 months ago and have since then converted 17 of my friends over to vaping. We are all car lovers and want our vehicles smelling fresh. Here's a few pics to wrap this up! One of my reasons I started vaping! I've have to keep my ford raptor fresh and smelling good, not like the stinkies. Vaping stuff IGO-W6 My collection and cabinet