Tom74

Yeah that's not a cheap unit. Good luck hope your next unit is better.

Good to hear! Well, the part about haveing a back up at least..... Hope things go smoothly with the replacement.

Best of luck to you getting things sorted out! I hope it's not your only PV. I'm depending on my Itaste vv v3 to get me off analogs right now and would be screwed if it failed like that.

From my experience, they do. When you buy anything from ebay you don't know what you're getting. You also don't know if this mod was dropped, how abused it was prior to you getting it, etc. Next time I'd suggest you buy from a reputable US vendor where you have more recourse. Just my two cents.

I was having a similar issue with one of my mods and ended being a connection issue. The battery was not always getting good contact. Went to the hardware store found some SS screws that fit. I changed out the contacts on the Mod and solved the issue.

Generally when I see a drop in vapor production coupled with the battery-tank connection getting warmer than usual it is a result of the inherent condensation that develops in the shaft and runs down the shaft through the coil and onto the battery. It sounds like you have checked that, so I am out of ideas. Have never had any of my units act that way that I havent been able to fix by either blowing the liquid out of the coil and drying the battery connection or just replacing the coil.