dusher

Here is the short version of how to fix kanger leaks and gurgling. There are design problems with the seals, but fortunately there is a real easy fix you can do if you have an extra atomizer handy. Do a google search for "How To: Fix Kanger EVOD leaking/gurgling issues". http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCwQFjAA&url=http%3A%2F%2Fgodofsteam.wordpress.com%2F2013%2F07%2F12%2Fhow-to-fix-kanger-evod-leakinggurgling-issues%2F&ei=A12SUt6WB8TKrgG6xoFY&usg=AFQjCNHOJtjWIPpv1tabQxkcH5rad8ivNg&sig2=J3qQSo5C_qt-LDjkAgnpqA&bvm=bv.56988011,d.aWM This article is simple and it works perfectly. Scroll to the bottom of the article and see the last photo. Borrow the top white silicone cap seal off an old atomizer and put it on the atomizer upside down. Leave the original seal in place so there are two seals, one down, one up. When you put it together, the upside-down seal will hang onto the tube inside the clearomizer. I have additional information learned by experience: You don't have to tighten the unit onto the battery so tightly because now there is enough rubber to seal the two parts so they don't leak. When you take the unit apart to fill it, the upside-down seal might pop off the tube inside the atomizer. Fish it out and put it back on the atomizer upside down. Be sure to check this otherwise you might damage it forcing the thing back together with a cockeyed seal stuck in the upper housing. This takes care of leaking, gurgling and air pressure differential issues 100%. It aslo solves the problem of high resistance vaping -- which leads to sucking juice through the wick. The four holes in the atomizer base often get blocked by the battery screw because you have to crank it down to get a seal.