gearvitaid

Hey guys. Do you like the Battlestar Baby Kit by Smoant? If yes, then you may also wanna try the follow up to it– Charon Baby Kit. Let's dive in for more details. Smoant Charon Baby Kit is built with innovative CPR technology, which provides a high-quality glossy finish that not only looks amazing but is water-resistant and leaves no fingerprint trace. Powered by a built-in 750mAh battery and driven by the ANT Chip, it is draw-activated and has a maximum output wattage of 15W. Charges are done by way of a Type-C USB port on the bottom of the device, and there is an LED indicator light on the side to show the battery level. For safety, Charon Baby has a range of safety features, including low voltage protection, short-circuit protection, 10s over-time protection, over-heating protection. As for the pod cartridge, it is refillable via a side filling port and can hold up to 2ml of e-juice. To meet different vaping needs, the pod comes with a pre-installed 0.6ohm mesh coil and a 1.2ohm regular coil in the kit. Since these coils are replaceable, it's no need to change a new pod cartridge when they burn out. At last, the airflow is not adjustable on this device. But for its price, this might be forgiven. All in all, the Charon Baby is not too bad as a versatile device for both MTL and DTL vaping. You may also like: beli vaporesso osmall pod

In my impression, Freemax has launched loads of great vape devices. And this time, they are back with their Autopod50 pod vape kecil kit which features the world's first double vape coil system. Here are more details about it. Autopod 50 Freemax is powered by a built-in 2000mAh battery and the wattage can be set in the range of 5-50W. Charging takes only about 80 minutes via a 2A Type-C USB port while firing occurs within 15ms. Navigating and changing settings is also quite easy thanks to an easy and multifunctional display screen and two adjustment buttons. On the screen's menu, you will see the total number of puffs taken, puff time, current wattage, atomizer resistance, current-voltage, and a battery bar. In addition to setting the power output, there are two sub-menus in which you may change your preference for timeout and reset the puffs. Each Autopod50 pod can hold 4mL of e-juice and is refilled via a bottom juice port. Moreover, it features a brand new coil system: Coiltech 4 which is outfitted with tea fiber cotton and military-grade mesh heating elements to provide the best possible vapor production. And, thorough testing proves that these mesh coils will last up to 30 or 40 refills before a replacement is needed, thus saving you a bundle. There are 2 different coil options to choose from: the AX2 0.5ohm Mesh coil (15 to 35W) or the AX2 0.25ohm Mesh Coil (30 to 50W), both of which are included in the kit. You may also like: harga xtra pod

Hey guys. Have you ever used the Caliburn Kit by Uwell? This time let's look at their Caliburn G which is a follow up to the original Caliburn. It will be available in the gearvita.id murah vape shop soon, don't miss out if you like. Uwell Caliburn G Kit is the upgraded version of the much-admired Caliburn. Powered by a 690mAh built-in battery, with a 15W max output, the Caliburn G keeps to the same pocket-friendly, stylish form factor as its predecessor. A removable coil design as well as a dual airflow system allows users to configure vaping styles in an eco-friendly manner. Equipped with a lightweight design, the Caliburn G can fit easily into pockets with a discreet yet durable design. Clicking the firing button 5 times will lock and unlock the device for a secure process. By simply inserting the pod into the device in different positions, users can alter the inhale with a restricted DTL vape and an MTL inhale possible. The 2ml Caliburn G pods keep the same simplicity as the device, with a practical top-fill method providing ease of use whilst also greatly reducing the chance of leakage. Installing and replacing coils is equally as easy, with a 0.8ohm mesh coil and a standard 1.0ohm coil to choose from. We recommend pairing both of these coils with high PG e-liquids of 50% and above for best performance. You may also like: beli smok x pozz

RELX is famous for their vape disposable devices with amazing flavors and extreme quality. This time let's look at their Nano 2, you may give it a shot if you like. RELX Nano 2 has been rigorously tested for flavor and quality of vapor and has been improved from the first NANO device that came out. All RELX Nano 2 are pre-filled with 1.35ml salt nicotine e-liquid and come with the best selling award-winning RELX flavors. The nicotine strengths of the e-liquid are either 30 or 50 depending upon the flavor that you choose, this can cater to the needs of most vapers. Powered by a built-in 280mAh battery, the RELX Nano 2 allows approximately 300 puffs, not very bad for devices with such a battery capacity. The best feature of the RELX Nano 2 is the ease of use. You do not need to charge it or fill any e-juice and can throw it when finished, so it is always ready to be used once opened. Helps all those people who move around or traveling and do not have to worry about any e-liquids or charging ports, just carry some with you whenever you need it. All in all, the RELX Nano 2 is an ideal choice if you are looking for a portable and easy to use pod system device for vaping on the go! You may also like: harga aegis pod system

Hey guys. This time let's look at the iStick Kiya Kit by Eleaf, it is an ideal device for MTL or RDL vaping. Here we go! Eleaf iStick Kiya Kit consists of the iStick Kiya Mod and the GS Juni Tank. Designed to be ultra-portable, the mod measures 35.5mm x 25.8mm x 57.2mm and looks modern with round corners and beautiful lines. However, the miniature size limits the output to 50W, but the minimum resistance capability is very low at 0.05ohm, so you will be able to use pretty much any low wattage atomizer in the marketplace today. Powering the iStick Kiya is a 1600mAh internal battery that will allow for long vaping times. The cell is recharged by plugging the unit into any wall outlet with a USB cable. The charging process concludes very fast since the system utilizes a 2A current and a temperature protection system ensures it's safe. The USB port is also used to update the mod in case Eleaf releases new firmware. With available modes that include power, temperature control (Ni, Ti, SS, TCR), and bypass, this mod is quite versatile. On the front of the mod, there's a newly designed 1.45" color display that shows vape data in an organized way and is bright. The menu includes indicators such as current resistance, current time, power, amperage, a battery bar, and more. The GS Juni Tank is a tiny little 20mm atomizer with a bottom adjustable airflow. Now, lack of grip on the airflow ring means I find myself having to literally unscrew the atty from the mod when I want to adjust my airflow. When fully open, 2 x 5mm slots provide a good restricted lung hit, along with the needlepoint DL airflow holes, which can be closed off until just one of three is visible, providing one of the nicest restricted MTL hits you could possibly ask for. The Juni has a 2ml capacity, with ELeaf branding on the glass, a thin SS top cap with a removable drip tip that's the right thickness for either an MTL or a restricted lung hit. You may also like: beli smok alike pod kit

Hey guys. This time I'm gonna introduce the Argus GT Mod by VOOPOO. It might be a good alternative if you are looking for a durable and powerful vape mod, let's dive in for more details. VOOPOO Argus GT Mod is lightweight and has a more ergonomic shape that makes it feels great in the hand. It comes with an outliner frame and leather or fabric wrapped backing which feels and looks great. The fire button is a basic rectangle with an indentation, and it is placed at the front of the mod above the screen. Below the screen are the up and down buttons and on the side behind a rubber plug is the USB-C port. It features a large color screen that's easy to see and clear and very bright. Much nicer than the ones we have seen on the Drag line lately. I didn't see a size listed, but it's likely a 0.96-inch screen. The Argus GT Mod has some toned-down options from older VOOPOO mods. You have RBA Mode (blue/R) which is your basic watt mode with no preheat options. Then there is Smart Mode (yellow/S), which is watt mode where it auto sets the wattage based on resistance and won't let you put it too high, and Temp Control mode for Ni200, Ti, SS. There's no TCR mode, but you can adjust the TCR in the preset modes. Also no preheat options, volt mode, or power curves like they had in the past. Odd that they would take those out, but not a big deal to me. You may also like: harga harga vaporesso target pm80

Hey guys. Have you ever used the Marvel 30W Kit by Hotcig? This time let's check out their Marvel 40 Mod Pod Kit which is the followup to its predecessor. Don't miss out on it if you'd like to try it out. Hotcig Marvel 40 Kit has dimensions of 91mm x 39mm x 20mm and is available in 7 different colors, all of which have space or psychedelic-style patterns. For durability, the lightweight chassis is made from zinc alloy and each pod from food-grade PC to ensure healthy vaping. And, the Marvel 40 works with a 1200mAh battery that permits 40 watts of power in either variable wattage, bypass, or custom DIY mode. Moreover, the Marvel 40 pods hold 2mL of e-liquid, which is actually very little compared to competing devices in the vape marketplace. Inside each pod, there's a 0.4ohm mesh coil that is compatible with high nicotine and standard e-liquids. The Hotcig Marvel 40 pod kit is also configured with adjustable airflow control on each coil, so you are definitely going to achieve the vaping-style you enjoy. You may also like: beli ohm aio

In this article, we'll be covering the Blotto Mini RTA by DOVPO. I think it will be a good choice if you are looking for a reliable RTA vape for more DIY fun. Ok, let's dive down. DOVPO Blotto Mini RTA is a smaller version of the original Blotto RTA. Firstly, this tank atomizer has an overall diameter of 23.4mm. As expected, it is primarily constructed out of stainless steel material and features the signature Vaping Bogan logo you saw on the original. When it comes to e-liquid, it has a maximum capacity of 2ml or 4ml with bubble glass. Both tank sections are included plus an additional PCTG tank, providing a "frosted" look. Filling it can be done quickly as it does fill from the top. What's great is that the Blotto Mini RTA Tank does feature the same knurling, so taking the tank apart, and filling is super easy. Just like the original, this one does have a unique build deck. What's great about it is that you can use both single coil or dual coil builds. This gives you plenty of options to try out. With its overall design, installing coils are a breeze too! It does feature the same 242-degree airflow system, providing you with an incredibly smooth draw. You'll get plenty of flavors too as the air travels from the bottom, and hits the coil directly. Lastly, you can fully adjust the airflow by simply twisting the base of the tank. If you were a fan of the original or looking for a new, slightly smaller rebuildable tank, the Blotto Mini RTA is one to check out. With its amazing airflow and deck design, it's a winner. You may also like: harga cartridge rpm 80

Hey guys. Pod mod kits are currently very popular in the market. This time we'll be covering the Captain 1500 Kit by IJOY, you may try it if you like. Here we go! IJOY Captain 1500 Kit has a modern and elegant appearance that combines metallic-feeling plastic with a leather grip to maximize ergonomics. Technically, the IJOY Captain 1500 Kit utilizes an internal 1500mAh battery which permits up to 40W of output for endless vaping without a recharge. Several safety protections include overtime, overcharge, high temperature, output over-current, short circuit, low battery, and max power protections. On the control face, there is an exclusive full-color display screen with a vertical menu that is convenient. With purchase, there is a 5mL cartridge included that has an effortless side-fill system and is transparent so you may see if it is time for a refill. The two coils you will get to start vaping the IJOY Captain 1500 are a C150.3ohm mesh coil that is pre-installed and ideal for sub-ohm vaping. Or, utilize the C15D 0.7ohm coil that is a great head to use with nicotine salts, but perhaps not over 10mG strength. An IJOY RBA head for the Captain 1500 is also set to be released, but that you must buy separately. You may also like: beli spesifikasi voopoo navi

In this article, we'll be covering the Gemm 25W Kit by Freemax. If you're looking for a unique pod mod kit that offers multiple vaping experiences, then you'll definitely want to check it out. Freemax Gemm 25W Kit looks fairly similar to the original Freemax Gemm 80W Kit but differs quite a bit. Like the original, it looks just like a vape pen. However, this new kit shares more similarities to a pod vape. Included, you'll get both the Freemax Gemm Pod Mod and two pods or tank cartridges. Let's cover the device first. It packs a large 1,300mAh built-in battery, and charges via micro USB. Additionally, it has a maximum wattage output of 25w. You're able to adjust the wattage too, between three different power levels. Simply click on the fire button three times and it'll switch. There are two LED light indicators on the pod mod, one for the battery and the other to show you the power output mode. As mentioned earlier, there are two pod cartridges included, and each will provide a different vape. Firstly, you'll get the 0.5ohm pod, which is designed for DTL or direct to lung vaping. Secondly, there's the 1.0ohm cartridge, which can be used for mouth to lung vaping. Airflow is adjustable as well on these pods, which is always a good feature to have. Each pod does have a 2ml e-liquid capacity, and rated to be filled between 10 or 20 times! That's a ton of usage from each Freemax Gemm pod cartridge. Lastly, the coils inside of the cartridges are SS904L mesh, and wicked with tea fiber cotton, ensuring maximum flavor. You may also like: harga harga vinci x

In this article, we'll be covering the GTX Tank 18 by Vaporesso. You may like it if you are looking for a reliable atomizer for MTL or RDL vaping, let's learn more about it. Vaporesso GTX Tank 18 is quite small, and surprisingly it's able to hold 2ml or 3ml of e-liquid. It'll hold that maximum amount with the pre-installed bubble glass tank section. If you don't like this look, you can always opt for the straight glass. For me, I'd stick with the bubble tank and the extra 1ml of vape juice. Inside the box, you'll get two coils in total. One, which is pre-installed, is the 0.8ohm mesh. The other is a 1.2ohm mesh. The filling is quite easy, as the top cap comes off completely. There's plenty of room for any type of bottle you might be using. Adjusting the bottom airflow is simple as well. It stops when either fully opened or fully closed, making it even easier to take apart. The coil replacement is a breeze too as it uses a plug-and-play coil system. We've seen this in many sub ohm tanks, so we're glad Vaporesso went this route. The included delrin drip tip is comfortable, and best suited for mouth to lung vaping with its narrow bore. It doesn't get hot while vaping either - an added bonus. You may also like: beli smok novo 2 kit

Hey guys. This time we'll be covering the GEN Mod by Vaporesso. You may like it if you are looking for a decent box mod, let's learn more about details. Mod GEN makes high power devices more accessible to users than ever before. Featuring a unique casing which includes 4 layers of coating, it will bring you a soft rubber-like hand feeling, yet still smooth to touch. Moreover, the final coating makes it scratch-proof and flame retardant. Powered by dual 18650 batteries, the mod integrates the advanced AXON chipset which enables it to fire from 5 to 220W and support the pulse mode and power ECO mode. Under the pulse mode, the AXON chipset will continuously give you a hit throughout your puffs (every 0.02s), offer you denser and more flavorful clouds with every puff. While in the power ECO mode, it can optimize your device's settings to give you that extra vaping time you need. At last, the mod is equipped with a 0.91" OLED screen, with it you can see essential vaping data clearly. You may also like: harga lost vape orion q ultra

Hey guys. This time we'll be covering the Artemis RTA by Cthulhu. It sports an easy-to-use build deck, a dome-shaped chimney for extra flavor and you have a ton of options with the airflow. To jual vape, you can check gearvita.id online store. Let's learn more about the details. Cthulhu Artemis MTL RTA is made from stainless steel material and sports an overall diameter of 22mm. With its compact size and low wattage design, it'll pair well with those single battery side by side devices like the Aspire Mixx. The Artemis does have a maximum e-juice capacity of 2.4ml and features a simple top fill design. While it's not the most capacity, you definitely won't be plowing through vape juice. There's a wide dome-shaped chimney on the inside, providing you with excellent flavor. Now when it comes to building on this deck, it's fairly easy. The Artemis does feature a two post single coil build deck. This deck is perfect for your smaller exotic coil builds or regular round wire. Furthermore, this RTA has an adjustable bottom airflow system. The AFC ring has 5 different holes you can swap between and adjust it, just twist it clockwise. Also, there are 4 different airflow pins you can attach to the 510 connection pin, allowing you to further customize the draw. Lastly, the Cthulhu Artemis RTA comes with a long MTL drip tip, but you can use your own personal 510 drip tips too. You may also like: beli r80 wismec

Hey guys. This time I'm gonna introduce the BP80 Kit by Aspire. If you are looking for a decent pod mod device, then you shouldn't miss out on it. Made from zinc alloy and a soft leather grip, Aspire BP80 Kit is both sleek and rugged. The design incorporates mechanical engineering with a retro appearance for a strong visual impact that is sure to turn heads. And, the materials ensure that the pod kit is both ergonomic and comfortable to hold. The Aspire BP80 features a brand new smart chipset which permits easily switching between auto mode and manual mode, all via a full-color display screen and adjustment buttons. With this chipboard, the BP80 can detect the coil type to give smart wattage suggestions with up to 80W of consistent power. And, the BP80 has smart wattage suggestion technology, maximum wattage protection, and intelligent power memory storage that remembers your last setting. But, if you are more hands-on, you can make adjustments in the range of 1 to 80W which works well if you are using RBA settings. Finally, the chipset comes with overall protection against overtime vaping, short circuits, overheating, low voltage, overcharging, and over-discharging. On the control face, there's a crystal clear display screen with all the vape data concisely displayed for viewing at any angle. The user interface shows vape data in full color and you may customize the screen's brightness or set the color theme to 6 different colors. On the menu, you can see vape data such as current battery percentage, the current mode, the current voltage, the current atomizer resistance, number of puffs, and last puff time. The Aspire BP80 features a built-in 2500mAh battery for all day long vaping, without a recharge. But, if your battery is drained, there's a Type-C charging port on the control face that is reversible to easily plugin and it operates with a 2A current. This means recharging is easy and lightning fast, plus you won't need an external charger or external battery. The BP80 pods can store 4.6mL of vape juice to extend vape times, but refills are also quite effortless. Moreover, the coils inside each cartridge are replaceable and are said to result in an unrivaled flavor experience. You see, the BP80 comes equipped with either a 0.17ohm mesh coil or a 0.6ohm double shot coil, both of which produce intense flavor, similar to an RDA atomizer. These durable heads have been thoroughly tested and produce the original taste of the e-liquid inside the pod. Best of all, the BP80 is also compatible with BP60 coils and even an RBA setup if you use a 510 adapter. You may also like: harga voopoo vinci 40w pod kit

Hey guys. This time let's look at the Moti X which is a decent pod mod kit. You may get it from the gearvita.id online store later if you like, here we go! Moti X is an AI smart pod mod kit with many innovative technologies. It is the first e-cigarette product to win the DNA Paris Design Award, and it is also the first vape product with ultraviolet disinfection function. Moti X is equipped with a built-in 1600mAh battery and uses a Type-C charging port for fast charging, which makes the battery durable. Moti X Kit also features innovative wattage auto adjustment and equipped with a UV disinfection cap, which will effectively sanitize the drip tip and help eliminate the risks of drip tip transmission of COVID-19. Moti X Pod has a 5.1ml e-liquid capacity, adopts an upgraded structure to reduce liquid leakage, and is internally compatible with Xeno Coil for excellent taste. This specially designed shape prevents the oil from contacting your mouth directly. In addition, the drip tip of Moti X is designed to be more ergonomic, allowing you to hold the device at different angles to adapt to different e-cigarette habits. You may also like: beli exceed grip kit