Jump to content

Carla

VT Member
  • Posts

    13
  • Joined

  • Last visited

Everything posted by Carla

  1. Discount Vapers Has a 60W for $39.59. They have very fast shipping, and most orders go out the same day if you order before 3:00pm. http://www.discountvapers.com/eleaf-istick-60w-tc-mod-black/
  2. I am rebuilding the same coil head. I put the head on different bases and it still does the same thing. I have tried all the things you have talked about. I thought I might be missing something. I guess it is just a bad head. That is a bummer, it is only about a weeks old. It is the same one I asked about in another thread, When it was making that loud popping noise.
  3. O It does it on both of the ego-t batteries that I have. Only one evod that I am trying to rebuild does this. I have rebuilt others that work just fine. And if I put I back on the meter, the meter still says 2.0ohm's.
  4. I have rebuilt 5 of them and it is still doing the same thing. I have checked all the things you listed. They are all ok, no wire touching anywhere and no tears in the grommet. If there was a short, wouldn't it show up when I put it on the meter to check the ohm's?
  5. I made a new coil with 32 gauge Kanthal A1 for my evod. Made it with 5 wraps, it came out a 2.0 ohm on the meter. When I put it on my ego-t battery which is putting out 3.6v to check it, the battery light flashed for a split second, and nothing. I unscrewed it and the battery flashed 3 times. I checked to make sure there was no wire tails sticking out that might causing a short. Still did the same thing. Tried it on another battery it did the same thing. So I made another coil and made sure the wires were not crossed as they went down the middle. Yes I put one tail inside the rubber grommet and the other one out side the rubber grommet. and then put in the post. It did the same thing when I put it on the battery. I put a different evod on the battery and it work just fine.
  6. So.... no lemon, lime, orange, Am I missing any?
  7. I was looking for what flavors not to put in it? I saw something somewhere about certain flavors doing bad things to the glass part of the tank, but can not find that info again.
  8. I would like to know what juice not to put in my EVOD. Why is there some that should not be used in an EVOD?
  9. Yes I did change the juice, that didn't help. So I looked at the coil, it was touching the side, I moved it just enough that it didn't touch any more and it stopped the popping. It was brand new and came that way. Will start checking any new ones I get before I use them.
  10. Kind of new to this, I am using an ego-t 650 battery. coil size? it is the one that came in it. I don't have a watts/volts tester.
  11. I just got a new EVOD tank 2.2 And it is popping and crackling every time I try to use it. I have used the EVOD tank 2.5 for awhile now and it does not do that. Why is my new one doing this
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines