Jump to content

malm123

VT Member
  • Posts

    5
  • Joined

  • Last visited

Profile Information

  • Location
    canada

malm123's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. as the title suggests.. I am using an E-LVT battery and have tried both the .5 and 1.2 ohm coils. the cotton is often BLACK by the end of the first day after putting in a new coil. - Yes, i let the juice soak for at least 10 mins when swapping a coil - Yes, i put some juice directly on the coil whenever I fill the tank - Yes, i "Prime the wick" before EVERY puff Within usually 1-2 days the flavour is completely gone, not getting any dry hits either. Just loosing all the flavour very quickly. The Cotton seems to be turning black even though with the 1.2 ohm coils I am firing it at 12 watts (which is kind of pitiful on its own.) This is incredibly frustrating + expensive and I seriously doubt my vape store will take the tank back unless i can demonstrate that something is actually wrong with it or the E-LVT. Anybody have any suggestions? Could it have anything to do with the E-LVT as opposed to the Subtank? thanks
  2. i think something that I underestimated is the thread on the tank needs to be wiped clean, and when you loosen the tank "to allow air bubbles in" what you are really doing is flooding this screw thread, yes it can help by also flooding wick and coil but you are messing up the suction motion by breaking the airtight seal. I think the problem MAY be that i didnt have the tank on tight enough with thread that was wiped clean. this is how i most recently fixed the dry hitting and havent had one yet though it has only been about a day. it seems as though the tank is meant to be screwed on so that the button on the battery lines up with one of the windows to the tank. any more or less than this causes me dry hits. @kngfdrgn thanks m8 this helps as well. some liquid seems to draw in more easily with less airflow (the thicker ones)
  3. thanks! will try tonight. Though that is what i meant when i said priming the wick, i definatley havent been in the habit of doing that every time i smoke it, makes sense though. if anyone else has kangertech products can you let me know if you have seen any of these problems? would you reccomend buying a second one or a bigger tank / battery? thanks much appreciated
  4. ive been mixing juices but here are the big ones, the brand is called smoke-less and are all 70/30 PG/VG: canadian classic tobacco flavour 12mg export A tobacco flavour 18mg arctic menthol 12mg peppermint 12mg 60/40 mix of 18mg export A tobacco flavour / 0mg cherry (roughly 12mg total for the mix) ice and fire (menthol / cinnamon flavour) 12mg ive tried mixing most of these as well and have had dry hits from all combos, most effective way to get dry hits to stop so far has been loosening the tank, allowing some air bubbles in, tightening it a tiny bit back, then priming the wick before hitting. still dosen't work every time. also the dry hits make me burn through coils in about a week, they said a coil should last at least 2 weeks but who knows. i think this just goes to show that im getting alot of dry hits
  5. Hey guys, just joined and wanted to get a second opinion to compare to what my local vape store says. I was a fairly heavy smoker (7-12 a day) and now they make me gag unless i am wasted. Basically i find myself vaping only but vaping alot because i hardly smoke analogues anymore and my kangertech mega seems to have trouble keeping up with me: 1: I have had an issue with this emow and the previous one i had (warranty swapped...though It had a battery problem as well) : DRY HITS! because it is happening now on the one they gave me as a replacement i am wondering if maybe I am doing something wrong? a number of things have proven to fix these dry hits (if only temporarily). Removing or loosening the tank, taking the coil out and re-seating it, ajusting airflow with the control on the tank, priming the wick. All of these things do help (at least sometimes) but it will go back to dry hitting usually at least once per fill... so basiclly is it bad quality control or is there something else i can try? maybe some fancy combination of the things above? 2: I am thinking of buying another because the battery dosent last me a full day (12 hour days), am wondering if i should just jump to another brand? maybe another kangertech model so some parts are interchangable? i just dont know how much loyalty i should be having to kangertech with these problems. any advice you guys have would be awesome thanks!
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines