kashley
-
Posts
6 -
Joined
-
Last visited
Posts posted by kashley
-
-
I'm thinking about getting the Aspire Triton V2 (Clapton) because the uWell crown has been leaking a lot. Any suggestions or advice, comments?
-
19 hours ago, Tam said:
What's the PG/VG ratio of the juice you're using? The nic level of the juice would have very little to no effect on the burnt taste you're getting. It sounds more like you're getting dry hits. If you've already fried your wick, no matter what you do now, it will continue to taste burnt until you rewick your coil and clean out the juice in your tank and replace with new.
I have went through 2 ( 4 packs) of coils. I think I'm using the wrong ohm? I've been using .5 but I'm thinking of getting the .25. But I tried the new juice I just got from another vendor that the ratio 70/30 and it's fine so far. Has been less than 24 hrs, so we'll see. The other vendor was making 80/20 I think.
17 hours ago, jasonculp said:You could be having one of 2 problems the first is your juice. I have had a bit of trouble with wicking in the MAX VG juices in my Crown. I have gone back to 70VG/30PG and 60VG/40PG in mine. If your juice vendor changed suppliers for their supplies it can change how your juice reacts to the heat. I use the .25 ohm SS coils. I normally run in Temp control at 40 - 50 watts.
It could also be the coils. There was a batch that went out a while back that had quite a few bad ones in it.
One thing I am pretty sure of is it isn't the iStick. It just supplies the power. You control how much. If your resistance is changing it could change the voltage settings compared to the watts set on the screen, but, you can still turn it up and down to produce the proper vape. This isn't nearly as big of a problem in Wattage mod as it would be if you were using Temperature control. You might try cleaning all of the connections in the tank and mod to see if it reads a little closer to what you are used to.
I think it could be the juice too. I talked to the guy making my juice and he said no one else is having the issue but I ordered juice from my old vendor and it's working fine now with a new coil. The new guy uses a higher VG 80/20 and my old vendor uses 70/20 and lower. I'm gonna go ahead and order .25 coils because I've never really educated myself on the different the ohm makes with my vaping.
-
Awesome. I my issue just started and I didn't want to buy a whole new set up or new batteries if it was just the juice. So I have new juice with lower VG waiting on me at home. I'm gonna try a new coil with it too. It's been a hassle. I went through 2 packs of coils ( all .5 ohm) and still having trouble. Was gonna order new batteries next. But thank you!
-
Ever figure out the problem? Same thing is happening to me but I have a uwell crown tank and an eleaf istick 100w.
-
I have an eleaf istick 100w with 2 efest 18650 3.7v batteries and a uwell crown tank that I use 0.5 ohm coils with. I have recently started getting a burnt taste. I have ordered new juice through a different vendor to see if that is the issue but I really don't think it is because He has made me 3 different flavors with different nic levels but I'm gonna test the new juice tonight. However, I have always kept my watts around 54 which reads as 5.2 v but since the burned taste started, I have it lowered to 44 (4.7 v) and it's barely hitting. I don't know if it's the coils or the batteries. I know how to prime the coils, have been doing this for over 2 yrs and have never had this issue. However, I am starting to question the ohm. I've just always used the .5 ohm but it is possible I'm using the wrong ones. PLEASE help me
I feel like I've been living a "lie" for yrs lol
Burnt taste!?!?
in Troubleshooting & Technical Issues
Posted
Idk, I like to have both. lol