adabella
-
Posts
8 -
Joined
-
Last visited
Posts posted by adabella
-
-
-
temperature protection between 200°F and 600°F (or 100°C-315°C)
under temp mode, Ni200 coil is required.
Be careful to only attach new atomizers that have cooled to room temperature to the mod.
When using a new atomizer or reconnect existing atomizer undre temp mode, the koopor mini will prompt "NEW COIL UO SAME DOWN" to allow you to confirm the change.a box that can breathe
the bottom of the box is full of small air holes, which are not only for decoration, but also for venting gases to prevent the box from overheating, and extend the operation life.magnet-held battery cover could be opened in seconds
koopor mini takes magnet-held battery cover. You can simply slide it off and replace battery without tools.koopor mini features one 18650 battery, and adjustable wattage from minimum 1W to maximum 60W. It can fire resistances from 0.06 ohm to 2 ohms to provide a different vape.
multiple protections
overheat protection, 12 seconds cutoff, low-battery warning, short circuit protection, low resistance protection, output auto-regulation protection.the out shell is cut at an elegant 45 degree angle, which really does feel better in the hand. Made of high-quality zinc alloy, koopor mini is super durable and strong. Streamline box combined with brushed-metal finish and beautiful design, you can hardly put it down.
specifications
size: 83.8*41*24.5mm
weight:120g
material: stainless steel and zinc alloy
output voltage: 0.8V-9V
temperature control range:200°F-600°F/100°C-315°C
temp mode resistance range: 0.06Ω-2.0Ω
watt mode resistance range: 0.1Ω-2.0Ω
standnby current: <20uA
output power: 1W-60W -
online and offline.
-
To use your specific example of low wattage, low wattage generally means slower ramp times; temp control help you avoid dry-burning and allows you to pump as much power as you like into your coil to ramp temperature faster without risk.
BTW, The purity of the NI200 coil and the coefficient rate setting will directly effect the result of the temp control in XCUBE II which I have tested. I'm sure the temp control function on X CUBE II is good enough not like M80.
-
-
Many of my vaping friends are keen to DIY... we like RDA.
TFV4 tank
in Sub oHm
Posted
Yes, I got it now, thanks.