swansoup

I got some of the newer version BVC coils (the ones with the bigger holes) for the nautulis. These coils seem to vape a lot better with Boss Reserve. I have been vaping that juice for a day now with no issues. I am thinking the older BVC coils with the small holes were not allowing the juice to wick properly I am glad I got the newer coils they are a lot better

Alright that could be the issues I opened the air flow to the largest setting on the nautulis and no luck That juice must not go well with that tank. I will have to try it again in the Atlantis. Thanks again for the suggestions I appreciate it!!!!!

Thanks for the replies Yes my coil was primed. I tried a few new coils in the nautulis with no luck. The boss reserve just burns after a few vapes. I have 2 bottles of the stuff and they both burn up in my nautulis. I built a single coil 1.5 Ohm for my RDA and used organic cotton. Saturated the cotton and got a good few vapes. The juice seems to work a little better with a buildable coil I tried my Atlantis and Boss reserve burns in that tank also Cuttwoods Unicorn Milk and sugar bear work fine in the nautulis. My wife even uses max VG in the nautulis with no issues Maybe the added flavors in the juice cause this reaction.

The bvc coils I have are the old style ones with the small holes. Maybe these coils are not providing enough juice. I don’t know!!!! I will try my RDA when I get a chance. Thanks

I think its Boss Reserve I used the same coil that was just burning Boss reserve and switched to Sugar with no issues I tried a new coil the other day and the same result.

I am using BVC coils I tried a new coil also. It burns after a few hits. Thanks

I am using Cuttwood Sugar Bear in my nautilus tank right now Sugar Bear vapes at 8 watts no problem It has the same vg/pg ratio 70/30 as Boss Reserve This is what I don’t understand why is Boss Reserve burning at 5 watts Thanks

Okay no problem I am using the nautilus tank

The currently purchased Cuttwood Boss Reserve. I can’t get this juice not to burn. I have my wattage on the lowest setting of 5 watts with a 1.6 ohm coil and Boss Reserve Stills burns. The juice they leaks out the side of my tank air hole. I don’t have this problem with sugar bear so I don’t think the 70VG/30PG is a problem with my tank. Have any of you vapors experienced this issue with Boss Reserve. I think it’s just horrible juice. I would appreciate your experience with Boss reserve Thanks