Jump to content

Tony Mike

VT Member
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

 Content Type 

Posts posted by Tony Mike

    DNA 40 - Temperature Control

    in Share the Latest Vaping Products

    Posted

    I have 3 vaporshark RDNA 40s and absolutely love these these. Knew has an erlkonigin, the other two I swap around dripping Atty because I can't find one Atty that: absolutely love.

    Nickel is a pain in through rectum to work with but with the temp limiting I'm getting much more durability out of through cotton wicks so I don't see myself having tl mess with through coils as often.

    I did notice that with 28g nickel and the temp control I have much more freedom to make the coils bigger; hence, offsetting some if the softness with through nickel.

    - (for the erlkonigin) I normally wrap 26 or 28 g lanthanum St 2.25 mnemonic and 7-8 wraps. now I'm wrapping my coils at 3mm with 2

    10-11 wraps. For my dual build on the clit 2 and tobh i did through same but dual coil.

    I also pulse and squeeze the coil more than I would lanthanum to add more rigidity. Setting that up making sure both the mod and Atty are cooled down before calibrating seem to work phenomenal. I don't see Amy of my other mods being used much more.

    Vaping and Deer Hunting

    in General Vaping Discussion

    Posted

    I hunt but I'm on private land so we usually are only in the blind for an hour or two before we head back to the camp for a refill (whiskey). Similar don't vape when in the blind; but I do only bring vanilla cheesecake up to the camp for those weekends and it's never given me an issue.

    Not sure if your vendor has one. But I would always order cheesecakes and request vanilla added to it.

    Not the best vape in the whole wide world but gets the job done and doesn't scare away the bucks.

    clear coating copper or brass

    in Modders Forum

    Posted · Edited by Tony Mike

    For my copper I use bartenders friend.

    I totally disassemble the mod, give it a good shine. I then put a little noalox on the threads only before reassembling.

    Some people say that noalox is bad, but I haven't had any issues.yet.

    Flexible clearcoat I've seen some cats using this stuff. I can't speak from first hand experience but they seem to like it.

    https://www.etsy.com/listing/101636524/protectaclear-protective-coating-jewelry

    Bump Everytime You Buy Something New

    in General Vaping Discussion

    Posted

    So I'm guessing this where we put put shipping lists...

    If I'm wrong just lemme know.

    - I usually buy one or two inexpensive attys a month and supplies. but ive beem saving for what i thoight was going to be a game changer in the provari 3 and low and behold the dna40 was the game changer so im converting all my regilated mods so i ordered a dna40 rdna from vapor shark on 10/15. And 2 more today.

    Also an erlkonigin and the erlk driptip adapter. A glass tank from ib tanked.

    1 liter of nic, i liter of pg and 2 liters lf vg.

    Also some flavors from tfa and 500ft of pure nickel 26g from temco.

    Hello all, some help please.

    in Introduce Yourself

    Posted · Edited by Tony Mike

    YEAH I haven't used a coil like that are higher wattage. Back in Feb I got went from the MVP to a provari and got into RBAs. A few months later I moved over to dnamods and mechs so I've never used a coil/head like that. On anything with higher wattage so I'm curious to see if they can wick fast enough to not cause dry hits.

    If I put a kayfun any higher than 16 Watts all i get dry burnt cotton.

    But that the nice part of a higher wattage mod.

    I can drip with my DNA at 25 w slap on a tanks and drop the wattage and keep vaping with the same mod.

    Or grab my erl and just swap tops and nor have to hit anything but the fire button. Lol. :)

    I what I'm really curios to see is the sx250w what chip. Supposed to come out in dcember 250w with temp control. I've vaped an Atlas at 50w and after My lings recovered decided that's the most I'll ever do. Lmao!!!!

    Anyway... too much coffee sends me on a tangent. That istick is an unbelievable mod for the money. It's gonna put a serious hurt o. Innokin.

    Hello all, some help please.

    in Introduce Yourself

    Posted · Edited by Tony Mike

    Well I am thinking about getting the box mod in a few weeks.

    I just ordered an iStick. I am currently dripping a 454 (clone) on a 4nine (clone). It isn't anything fancy, .4ohm dual coil 26ga. I am really enjoying the setup, I just really want the regulated and dual battery option. I use tanks all day, and drip in the evening. It is my relaxation.

    I used to do the same till I got a magma and that would let me drip and drive without having to redrip. (Sounds like a syphilis patient) . For a while I wasn't using a tank at all, just couldn't compare to a stopper.

    However; I just recently went back to tanks by day with the erlprinz. Loving that tank. At 22w and a 1 ohm single coil build it hits almost just like the magma. But it's a 5 Ml tank. So much better than any tank I've owned or used.

    Let me know what you think of the Istick. was planning on pulling the trigger and then evolv screwed up my plans.

    Hello all, some help please.

    in Introduce Yourself

    Posted

    I am very interested in the iStick. I just have not pulled the trigger on it. I have been running the MVP with the full size Nautilus and a BVC. I was thinking that the iStick and my Nautilus Mini would make a good ADV.

    I am also trying to make my mind up between a Sigelei 100 watt, IPV3, and Cloupor T6. I am currently leaning toward the Sigelei, but not sure. I am wanting a regulated mod to drip on. I really don't need that much power, but I sure like the options...

    I have a DNA 40 shipping out Thursday and ordering 2 more tomorrow. I'm transitioning to all temp Control Mods. I normally drip my Dial coil builds at 24w so even a 30w mod is enough for me when I want to place cloud chaser I use my 454/stingrayx with a 0.3 build.

    I have however read quite a few unflattering things about clipper in general and other than the sigelei having a bad 510 Nothing bad about it. They fixed the 510 issue so if it were me that's what I would go with.

    My Nautilus

    in General Vaping Discussion

    Posted

    The original one with the large tank. It works fine 99% but on occasion, when I pick it up for a vape, it vapes only a tiny bit and I taste juice in my mouth. I usually turn the OHMS up, vape it it hard for a dozen times and the gurgling calms down and then it begins vaping well again. What am I doing to cause this to happen?

    Flooding on part tanks is unavailable. On some of the tanks with changeable heads if the head isn't screwed down on the base all the way it can be more prone to flood.

    To get the rod of the flood hold your finger over the air holes and flip it upside down, blow into the driptip. Doesn't always work but 8 of 10 times it should.

    How much do I really need to spend for a Mech mod

    in Mechanical Mods

    Posted · Edited by Tony Mike

    I'm a build quality vapor. I buy and use both authentic and clone alike. The major difference in what I've bought has been smoothness of the fire switch. Some lower quality clones can be trash though.

    For instance. The infinite stingray X is actually nicer than the authentic. The hcigar is high quality and well built but the button is a little crunchy.

    Overall though from what I've seen if you stick with infinite, ehpro and hcigar you should be good.

    I may suggest though if youre gonna run a tank like a protank maybe throw a kick in there to keep the consistency of your vape while you're using the tank.

    If youre comfortable building a box. I drip on my dna30s with dual coil builds and have had some fairly satisfying results at 20w on a single coil. So by the time you factor everything in you might be able to find a decent 20w -30w- 50w regulated mod for not much more than a quality clone Plus a kick, unless youre looking to ultra subohm.

    Like everything else you want your mod to fit your vaping style. Unless you start getting multiple Mods for different purposes.

    I try and keep my builds at 0.3 or higher on the mechs and 0.5 or higher on the dnas. (They won't fire below a 0.5)

    Hello all, some help please.

    in Introduce Yourself

    Posted

    Hi, I am Jacob and I am new to vaping. I fell like my vaping is not satisfying my craving for an "analog." I have an ego-t and a haus (cheap walmart vaper) for my back up. This is my second day.

    I smoke and chew I am trying to quit both but still feel the need to smoke not so much chew anymore. I don't know anything about vaping and had some awesome help from a store here is central kansas who has gave me a lot of info.

    So can you do too much vaping? How do you tell if you have done too much? Any places to get free samples? Not sure what e - liquid to go for. I have searched this forum and others but unable to answer my questions.

    Thank you for you time.

    When I first tried making the switch I tried 2 different styles of cigalikes and several egos. They didn't work. In fact they made me smoke more. It was the gradual voltage drop as the. After was dying. So I went big and for an MVP and an aerotank worked charm cranking up the power and a fullest draw on the aerotank easy giving me what I needed. Now they have that istick which I think is a much better option over the mvp for the same price. So many new products coming out foe good prices i wouldn't feel right suggesting anything foe much more.

    Ebay has them dor about 32-39 dollars its the istick by eleaf. That with a Nautilus mini would give you plenty of vapor and with the right liquid youre looking at a great setup.

    Congrats on making the choice to put the stinkies down.

    new to vaping, first time today, what I bought

    in New Vapers Forum

    Posted

    When I started I ONLY vaped tobacco flavors. 3 months later just candies, now I'm on a desert kick.

    I have 4 advs that I rotate.

    An apple pie

    Bananas Foster

    Peanut butter and chocolate pie

    And one is kind of a Berry rice krispies treat.

    But Yeah I found it best to taste a few different types every now and again it stops vaping from getting boring at least for me it does.

    Hey vaportalk

    in New Vapers Forum

    Posted

    So I'm a total noob on y'alls forum. I've been vaping for right at a year now and have several different Mods. A couple of provaris a few mechanicals and a few dna30s

    Checking to see if this forum is geared more towards the "retail" store or something where people hang out and and shoot the ****.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines

  I accept