Mod coil ohm reader error

[smokeysquirrel]

I have an issue with my tc150 mod so in the mean time I'm using my 60w joyetech. When I put my tank (vaporfi viper) on my 150 it'll either read as a "no atomizer" or 1.6 ohm roughly. My coil is a .5ohm coil. My 60w shows .54 ohms so I'm pretty sure it's my 150 ohm reader either is bad or I need to fix the connection piece on the mod itself. Either way is it really worth the hassle or should i just get a new mod.the picture is from when it read more appropriately.

[Walt]

Sometimes just cleaning the connections, especially at the 510 connector with either contact cleaner or rubbing alcohol will shore things up.  If not, it means taking the mod apart and you will have to decide if you want to do that or no.   

[Tam]

Like @Walt said, try cleaning the 510 connection. Don't know if you have a fixed pin inside it or if it has a spring, but you can also lift the connector inside the 510 connection a little to make a better connection. Be very gentle and use a pin or a straightened paper clip.

[smokeysquirrel]

It's a fixed connector. I probably need to clean the connector. If that don't help. I guess I'll take it apart since it's not under warranty. But if I can't get it to work still any mod ideas? Looking around 150w still.

[Walt]

There is one of these left if you don't need temperature control:  https://www.vaportalk.com/us/shop/sigelei-fuchai-213w-tc-mod-black/  

It puts out about 150 something watts and is built solid.