Jump to content

koopor mini 60W Temp control box mod


Recommended Posts

11667499_1598636887059377_79720979965666

temperature protection between 200°F and 600°F (or 100°C-315°C)
under temp mode, Ni200 coil is required.
Be careful to only attach new atomizers that have cooled to room temperature to the mod.
When using a new atomizer or reconnect existing atomizer undre temp mode, the koopor mini will prompt "NEW COIL UO SAME DOWN" to allow you to confirm the change.

a box that can breathe
the bottom of the box is full of small air holes, which are not only for decoration, but also for venting gases to prevent the box from overheating, and extend the operation life.

magnet-held battery cover could be opened in seconds
koopor mini takes magnet-held battery cover. You can simply slide it off and replace battery without tools.

koopor mini features one 18650 battery, and adjustable wattage from minimum 1W to maximum 60W. It can fire resistances from 0.06 ohm to 2 ohms to provide a different vape.

multiple protections
overheat protection, 12 seconds cutoff, low-battery warning, short circuit protection, low resistance protection, output auto-regulation protection.

the out shell is cut at an elegant 45 degree angle, which really does feel better in the hand. Made of high-quality zinc alloy, koopor mini is super durable and strong. Streamline box combined with brushed-metal finish and beautiful design, you can hardly put it down.

specifications
size: 83.8*41*24.5mm
weight:120g
material: stainless steel and zinc alloy
output voltage: 0.8V-9V
temperature control range:200°F-600°F/100°C-315°C
temp mode resistance range: 0.06Ω-2.0Ω
watt mode resistance range: 0.1Ω-2.0Ω
standnby current: <20uA
output power: 1W-60W

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines