Jump to content

Itaste mvp 2.0 problem


Recommended Posts

Welcome to VT!

The error you're seeing means the device cannot detect the tank (atomizer).  First thing to do is change the coil, but if that does not work, the center-pin on the MVP may have been pushed down too far to make contact with the tank.  Use a tiny screwdriver and use it to gently pry the pin upwards a very tiny bit.  One of these two will generally fix the issue.

Link to comment
Share on other sites

Thank you guys. My friend just showed up and figured out the problem. Some fluid managed to get into the heating element in the coil and also on to the center pin. So he told me that I needed to remove the fluid from inside of the coil by blowing it out. I used a paper towel to clean the center pin off. Works perfectly now.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines