Richstag Posted June 21, 2014 Share Posted June 21, 2014 So this post is for Kayfun users. I have played with different resistance micro coils in the standard style I was taught and figured out the best wicking for each fluid. I just tried a new way to attach my coil and run my wick. Heres a pic to show IMG_20140620_215139 by Richstag, on Flickr Has anyone tried this way opposed to the slanted way like in this pic image by Richstag, on Flickr Just made it and I centered it and tucked the wicks. I also found a neat way to get the coil as low to the air hole as possible. i just slide a tiny spacer under it and lower it down then remove the spacer. Leaves a very small gap and I can't mess it up as easily. 3Rutez 1 Link to comment Share on other sites More sharing options...
Bushwick Posted June 21, 2014 Share Posted June 21, 2014 Sorry to hassle you like that, Rutez. I know you are an experienced builder and are aware of all the safety stuff. I wasn't paying too much attention. On a more positive note, nice build, Rich. It looks great! Link to comment Share on other sites More sharing options...
3Rutez Posted June 21, 2014 Author Share Posted June 21, 2014 No harm done. I take all criticism as the constructive type. Bushwick 1 Link to comment Share on other sites More sharing options...
Richstag Posted June 21, 2014 Share Posted June 21, 2014 Sorry to hassle you like that, Rutez. I know you are an experienced builder and are aware of all the safety stuff. I wasn't paying too much attention. On a more positive note, nice build, Rich. It looks great! Thanks bud, I am vaping with it now. So far so good. Its 1.69ohm. Going to try it for a week like I have my other coils. Link to comment Share on other sites More sharing options...
iheartvape Posted June 22, 2014 Share Posted June 22, 2014 24g w/ 30g twisted dually @ 10 wraps for 0.32 ohm..... 3Rutez 1 Link to comment Share on other sites More sharing options...
Richstag Posted June 22, 2014 Share Posted June 22, 2014 ^thats nice looking work. Link to comment Share on other sites More sharing options...
iheartvape Posted June 22, 2014 Share Posted June 22, 2014 Thank you. I haven't even done anything with it yet. Its just sitting there still. I haven't been using my mechs lately, and that's too low resistance for my 20watt device. Link to comment Share on other sites More sharing options...
Richstag Posted June 22, 2014 Share Posted June 22, 2014 Well fire her up! Whats wrong with your mechs? Link to comment Share on other sites More sharing options...
iheartvape Posted June 22, 2014 Share Posted June 22, 2014 Nothing is wrong with them, just been on a VW kick lately.... lol Link to comment Share on other sites More sharing options...
Richstag Posted June 22, 2014 Share Posted June 22, 2014 Oh gotcha! Yeah, I never fell for the vv/vw devices. They are neat but I can't get one to run like my mech. On the other hand the nicest I have tried is the sigeli 20w and kick2. Link to comment Share on other sites More sharing options...
iheartvape Posted June 22, 2014 Share Posted June 22, 2014 I just wicked that build and threw it on my maraxus with a fresh vtc5 holy vape batman... hit like a freight train! I forgot how hot a sub ohm hits, and those coils glow red in a split second. I think I rekindled my love for my mechs... lol Love2VapeDaily 1 Link to comment Share on other sites More sharing options...
Richstag Posted June 22, 2014 Share Posted June 22, 2014 AWESOME! Link to comment Share on other sites More sharing options...
VaporTron Posted June 22, 2014 Share Posted June 22, 2014 0.8 ohms, 28 gauge kanthal 3Rutez 1 Link to comment Share on other sites More sharing options...
mvince201 Posted June 22, 2014 Share Posted June 22, 2014 Sweet build, but why not duals? Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 (edited) quick question guys...iv been trying to post my builds but I cant seem to copy and past on my post...how do you post up pics? edit im using photobucket url code Edited June 23, 2014 by crush02342002 Link to comment Share on other sites More sharing options...
Richstag Posted June 23, 2014 Share Posted June 23, 2014 I had this problem it was the antivirus blocking this site from accessing my computer's clipboard. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 (edited) iv tried with my laptop and my phone...I cant simply copy from photobucket and past the url into my post...how does everyone else do it? iv done it on every other forum, I cant paste anything here. Edited June 23, 2014 by crush02342002 Link to comment Share on other sites More sharing options...
iheartvape Posted June 23, 2014 Share Posted June 23, 2014 Use the "IMG" code and just paste it directly into the body of your post. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 just tried...no go Link to comment Share on other sites More sharing options...
mvince201 Posted June 23, 2014 Share Posted June 23, 2014 .08? *sigh* That's way too low. You have a 46amp battery? Sony VTC5 is safe to pulse up to 60 amps for 10 seconds or under I believe. 30 amps is the max continuous discharge. Link to comment Share on other sites More sharing options...
Richstag Posted June 23, 2014 Share Posted June 23, 2014 Try flickr bbcode. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 well if anyone cares to see you can see the pics on fadoravapor.com forum under diy mods and mechanicals Link to comment Share on other sites More sharing options...
Bushwick Posted June 23, 2014 Share Posted June 23, 2014 I use photobucket as well. Use the Direct code. That is the only one that works for me. Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 still a no go... I cant paste anything...no links whatsoever Link to comment Share on other sites More sharing options...
crush02342002 Posted June 23, 2014 Share Posted June 23, 2014 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now