bananabic Posted September 26, 2011 Share Posted September 26, 2011 I'm using a cartomizer from Liquidxpress.com and noticed that the amount of air flow rate decreased. It feels like I'm sucking on a straw dipped in triple thick milkshake. Is there too much juice in my cartomizer? I don't know what's causing this. Link to comment Share on other sites More sharing options...
Christopher Posted September 26, 2011 Share Posted September 26, 2011 How long have you been using the cartomizer? If it's older than a week toss it out. If it's new, you may wish to remove it, and blow out any excess liquid that's stuck in the center of the cartomizer. (Through the button or top) Link to comment Share on other sites More sharing options...
BirdDog Posted September 26, 2011 Share Posted September 26, 2011 I have experienced the cartomizers to gum up faster or get that tight draw a lot sooner when using a liquid with a higher content of VG. Christopher 1 Link to comment Share on other sites More sharing options...
Viper Ron Posted September 26, 2011 Share Posted September 26, 2011 I saw somewhere where someone mentioned using pipe cleaning wire to clean the middle tube of the cartos. Seems like a good idea and thinking about picking up some myself Sorry I don't know what they are really called! Link to comment Share on other sites More sharing options...
DAYVAPE Posted September 26, 2011 Share Posted September 26, 2011 You can also use a paperclip to align the airflow tube again... usually works for me. DarthVaper 1 Link to comment Share on other sites More sharing options...
maverick Posted September 27, 2011 Share Posted September 27, 2011 Agreed. Have a couple of paperclips for this purpose. Run it through the battery end while wiggling it around a little. Sometimes this will actually move the vertical wire just a bit and it will hit better than new. Vaping and carto's = must have paperclips. DAYVAPE and DarthVaper 2 Link to comment Share on other sites More sharing options...
jnnfrlsw Posted November 15, 2011 Share Posted November 15, 2011 my cartos start getting harder to draw by the 4-5th day of using it. Sooner if your juice is thicker. To keep that just new carto feel I change out to a new carto every other day. They are cheap enough for me to do that. Jeffb 1 Link to comment Share on other sites More sharing options...
mcquinn Posted November 16, 2011 Share Posted November 16, 2011 I look through mine and if I cannot see light at the end of the tunnel a paper clip will usually open it back up and align things.I think it usually gets that way when I vape it a little too dry and things get too hot and melt. Christopher 1 Link to comment Share on other sites More sharing options...
Christopher Posted November 16, 2011 Share Posted November 16, 2011 I look through mine and if I cannot see light at the end of the tunnel a paper clip will usually open it back up and align things.I think it usually gets that way when I vape it a little too dry and things get too hot and melt. That's actually a great tip. It never crossed my mind to clean out the center area with a paper clip. +1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now