shen_long86

What to do when that nice new mod starts losing its paint...

Strip it and polish it!

Sent from a galaxy far far away

So what do you do when you get a sexy new polished SS mech mod and all of your tanks are black?

You take a black tank and sand all the paint off and polish it!

Sent from a galaxy far far away

They've made it stateside.  The Govad RTA.  This as all RTA's is a different critter.  Massive air flow.  Like zero resistance air flow.  For vapor production this could compete well with a lot of dual coil attys.  Flavor is bright and on point but with the massive airflow it is not as intense as some attys.  It is finicky.   There's a pretty small latitude on wicking between flood, just right, and dry.  Second build so far.  2x28+32SS, 5.5Wrap, 4mm, ~0.5Ω.  I might be on the light side with cotton as there is a slight gurgle.  No leaking.  But if I really hit it hard and long, I can dry it out a bit toward the end.  Bottom line; it's a keeper in my books.  Enjoying the ride! 

Finally got my hands on one! Ijoy Captain Pd270 mod, and i must say I am in love. It runs up to 234 watts, has temp control and is stable down to 0.05 ohms. It runs the new 20700 batteries, but also comes with an adapter for 18650.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Finally got my hands on one! Ijoy Captain Pd270 mod, and i must say I am in love. It runs up to 234 watts, has temp control and is stable down to 0.05 ohms. It runs the new 20700 batteries, but also comes with an adapter for 18650.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Got in my new mods, 2 XXX hybrid mechs. One in brass and the other in that sexy black copper! These thing hit like freight trains, only using 18650 right now until i get some 20700's to run.

Sent from my SAMSUNG-SM-G935A using Tapatalk

My pleasure!  They really do beg one to latch on and have a vape. 

Cute little buggers they are, they are!!!!

OMG!  If you haven't yet, you need to!  RDA Flavor. (note period at end)
Serious as a heart attack.  Best flavor tank I've found yet.  2x28-36SS .3Ω, two coil, 8 wrap slightly spaced build.  Vaping @ 420°F with 45 Joules available and using a "powerful" ramp.  Intense, spot on flavor. 
Highly recommend!!!
 

Features and Specs:
 
Dimensions: 2-3/16" x 1" (Including Drip Tip and Threads)
Diameter: 25mm510 Threaded
5.2ml Capacity
Isolated Rebuildable Deck and Base to Reduce Heat
Unique Wick Reservoir Design for Optimal Wicking and Minimizing Leaks
Dual Post Velocity Style Deck
Wide 17mm Build Deck
Hidden Side Fill Design
Top Adjustable Airflow Valve
Advanced Airflow Circulation System
Locating Slot and Bar Allows for Consistent and Accurate Performance
POM (Delrin) Drip Tip Shield
Quartz Glass Tank
304 Stainless Steel Construction
510 Drip Tip Compatible
 
Pros
 
Holds 5ml juice
Crazy amount of top airflow
Velocity style deck
Kickass james bondesque hidden fill port
Amazing flavor
 
Cons
 
Chimney spins when screwing on the build deck, also have to line up 2 notches on the chimney to either side of build deck.
You absolutely have to build rediculously close to the posts, otherwise you will short on the chimney.
Wicking is kind of a royal pita!
 
But all of these cons listed, this is the only Rta that i have tried and loved!.
 
Sent from my SAMSUNG-SM-G935A using Tapatalk
 
 

Features and Specs:
 
Dimensions: 2-3/16" x 1" (Including Drip Tip and Threads)
Diameter: 25mm510 Threaded
5.2ml Capacity
Isolated Rebuildable Deck and Base to Reduce Heat
Unique Wick Reservoir Design for Optimal Wicking and Minimizing Leaks
Dual Post Velocity Style Deck
Wide 17mm Build Deck
Hidden Side Fill Design
Top Adjustable Airflow Valve
Advanced Airflow Circulation System
Locating Slot and Bar Allows for Consistent and Accurate Performance
POM (Delrin) Drip Tip Shield
Quartz Glass Tank
304 Stainless Steel Construction
510 Drip Tip Compatible
 
Pros
 
Holds 5ml juice
Crazy amount of top airflow
Velocity style deck
Kickass james bondesque hidden fill port
Amazing flavor
 
Cons
 
Chimney spins when screwing on the build deck, also have to line up 2 notches on the chimney to either side of build deck.
You absolutely have to build rediculously close to the posts, otherwise you will short on the chimney.
Wicking is kind of a royal pita!
 
But all of these cons listed, this is the only Rta that i have tried and loved!.
 
Sent from my SAMSUNG-SM-G935A using Tapatalk
 
 

Features and Specs:
 
Dimensions: 2-3/16" x 1" (Including Drip Tip and Threads)
Diameter: 25mm510 Threaded
5.2ml Capacity
Isolated Rebuildable Deck and Base to Reduce Heat
Unique Wick Reservoir Design for Optimal Wicking and Minimizing Leaks
Dual Post Velocity Style Deck
Wide 17mm Build Deck
Hidden Side Fill Design
Top Adjustable Airflow Valve
Advanced Airflow Circulation System
Locating Slot and Bar Allows for Consistent and Accurate Performance
POM (Delrin) Drip Tip Shield
Quartz Glass Tank
304 Stainless Steel Construction
510 Drip Tip Compatible
 
Pros
 
Holds 5ml juice
Crazy amount of top airflow
Velocity style deck
Kickass james bondesque hidden fill port
Amazing flavor
 
Cons
 
Chimney spins when screwing on the build deck, also have to line up 2 notches on the chimney to either side of build deck.
You absolutely have to build rediculously close to the posts, otherwise you will short on the chimney.
Wicking is kind of a royal pita!
 
But all of these cons listed, this is the only Rta that i have tried and loved!.
 
Sent from my SAMSUNG-SM-G935A using Tapatalk
 
 

New build i came up with last night.
26/36 dual core fused clapton paralleled with 24g 8/9 wrap on 3mm coming in at 0.25 ohms in the 30mm temple.

Sent from my SAMSUNG-SM-G935A using Tapatalk

New build i came up with last night.
26/36 dual core fused clapton paralleled with 24g 8/9 wrap on 3mm coming in at 0.25 ohms in the 30mm temple.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Sorry, I couldn't resist [emoji41]

Sent from a galaxy far far away

@Walt where did you get it I want one

Just ordered a SMOK Alien Baby AL85 in black and silver and a couple of 18650's from the ever AWESOME VaporTalk Store  
*happy dance*
Since it's my one year vaperversary present to myself maybe our kind leader @Christopher will toss in the battery case I forgot to add (go ahead and charge me for it)
I can't wait until it gets here...WAH-HOOOOO

Finally snagged me a noisy cricket v2 and i am already in love with this mod!
It is soooooo versitile, currently running a 0.44 in reg. series and its killer.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Finally snagged me a noisy cricket v2 and i am already in love with this mod!
It is soooooo versitile, currently running a 0.44 in reg. series and its killer.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Finally snagged me a noisy cricket v2 and i am already in love with this mod!
It is soooooo versitile, currently running a 0.44 in reg. series and its killer.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Well I think I found the issue. I don't think my atty was tightened enough.


Sent from my iPhone using The Vapor Talk mobile app

Just got this mod and I can only get a few good pulls before it just won't fire any more. Using two Brillipower IMR18650's rated for 3100MAH and max 40A. My build is two five wrap Alien wire running about .3 ohms in Wismec Indestructible. The light gives about 10 slow blinks when pressing fire button followed by several fast blinks then goes off. Device does not shut down, just won't fire. Any tips suggestions?
 
 
Sent from my iPhone using The Vapor Talk mobile app

Woot, got some vape mail. Authentic copper limitless mech, 2 ijoy rdta's, an obs engine nano, drip tips for nano, limitless sleeves and asst. Juice.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Woot, got some vape mail. Authentic copper limitless mech, 2 ijoy rdta's, an obs engine nano, drip tips for nano, limitless sleeves and asst. Juice.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Woot, got some vape mail. Authentic copper limitless mech, 2 ijoy rdta's, an obs engine nano, drip tips for nano, limitless sleeves and asst. Juice.

Sent from my SAMSUNG-SM-G935A using Tapatalk