3Rutez

No harm done. I take all criticism as the constructive type.

So this post is for Kayfun users. I have played with different resistance micro coils in the standard style I was taught and figured out the best wicking for each fluid.

I just tried a new way to attach my coil and run my wick. Heres a pic to show

IMG_20140620_215139 by Richstag, on Flickr

Has anyone tried this way opposed to the slanted way like in this pic

image by Richstag, on Flickr

Just made it and I centered it and tucked the wicks. I also found a neat way to get the coil as low to the air hole as possible. i just slide a tiny spacer under it and lower it down then remove the spacer. Leaves a very small gap and I can't mess it up as easily.

I have come to the point where I can not stand a non sub ohm build. I love to vape between .20-.25ohm, that's my sweetspot. Every build I test with my multimeter even if its the same build as before. I also lay my mod down when it gets warm. I only vape on vtc 3,4,5,6 but only for about 3 hours and then I stuff a fresh one in. I also pull my topcap of when I drip and look at my coils. Look for hotspots etc. SAFETY IS KEY. AGAIN SAFETY IS KEY

I'm sure you know the risks involved, as well as the capabilities of your batts and device.... But to post a pic of the build and ohm it's rated for without the context of your other gplat post is a lil misleading for anyone not following what you're doing. Might want to try and edit the pic post with some warning/details about what you're intentions are for future members viewing this. IMO

.08? *sigh* That's way too low. You have a 46amp battery?

I'm always sub-ohming. Most of my builds are in a range from .8 down to .14. My sub .2 builds get hot if you drag them repeatedly and flex the button over and over, as is to be expected, but it gets too warm let alone hot, I put it down. You have to be smart about it. A lot of people (not all mind you) have the common sense when the thing by your face is scorching hot to put it away for a bit. I like clouds, a lot. Its my dumb guilty pleasure. As long as you play it smart and don't chain vape the piss out of a .2 ohm coil, you should be fine.

This was my first shot at the "wickless coil" that Proetus shared with us. After watching the video I became more than curious to see how it would work when I tried it for myself. As with all my builds, this is all 28g kanthal. This thing was a P.I.T.A. to build. It's not all even, there are some loose wraps in the kanthal around the outside, but it vapes pretty good. Like the guy who filmed the video tells us, it's not an all day coil. But the flavor out of this thing is absolutely amazing. I am shocked. It changes the taste of my juices completely. I will NOT be giving this one another try because of how difficult it was to put together, but I am pleased with the results.

GPlat 26g dual micro coils, 10/11 wrap @. 37ohm

Here is some info Yosh Yosh gave me...

"Gplat is a resistance wire that has a lower ohms per foot that standard kanthal because it's more efficient, it's easier on your battery, it heats up faster, cools down faster, and has a different flavor than kanthal. It's more focused and much sharper. All around better flavor. the Elite series is everything standard Gplat is but just amped up. even lower ohms, softer wire, and flavor is outstanding. Cons? It has a lower melting temp than kanthal so you can't dry burn it for 5 seconds straight (i dont know why you would want to) or your coil will collapse. It's also more expensive. ....but it's f$*#!@ AmazeBalls

The manufacturer of the wire will not disclose what the composition of it is. It's all up in the air but what they will tell me is its a 100% lead free safe to vape alloy made by vapers for vaping specifically. It's not an industrial resistance wire like kanthal is."

Here is some info Yosh Yosh gave me...

"Gplat is a resistance wire that has a lower ohms per foot that standard kanthal because it's more efficient, it's easier on your battery, it heats up faster, cools down faster, and has a different flavor than kanthal. It's more focused and much sharper. All around better flavor. the Elite series is everything standard Gplat is but just amped up. even lower ohms, softer wire, and flavor is outstanding. Cons? It has a lower melting temp than kanthal so you can't dry burn it for 5 seconds straight (i dont know why you would want to) or your coil will collapse. It's also more expensive. ....but it's f$*#!@ AmazeBalls

The manufacturer of the wire will not disclose what the composition of it is. It's all up in the air but what they will tell me is its a 100% lead free safe to vape alloy made by vapers for vaping specifically. It's not an industrial resistance wire like kanthal is."

Just keep my wheel oiled and my water bottle topped off, and if you catch a whiff of ammonia do me a solid and change out the newspaper.

Just keep my wheel oiled and my water bottle topped off, and if you catch a whiff of ammonia do me a solid and change out the newspaper.

Wait.... he gives a 10% discount on Suicide Bunny's OB when Old Dirty Bastard is playing on the Pandora internet music radio??? Tune it to ODB radio, all the time. Lol

Bulldog-Vapor Blueberry Pie. Tastes like……. blueberry pie. SHOCKING!

I don't rebuild very often, so the high price isn't too big of a turn-off for me. I am still rocking the 26g dual micro coils in my Kraken from early May, which has been my ADV setup for that entire period.

It is still way cheaper than when I started to vape, purchasing replacement coils for the ProTank every 5 days.

We will see how it stacks up against the tried and true Kanthal wire. I am happy to be the VT guinea pig.

When I walked into Wal-Mart I was healthy and clean. When I left I was filthy, obese, smelly, and there was a swarm of flies trailing me in my scooter.

I hadn't been in that store for years, and that dang case was the only reason I entered hell's gates.

I don't rebuild very often, so the high price isn't too big of a turn-off for me. I am still rocking the 26g dual micro coils in my Kraken from early May, which has been my ADV setup for that entire period.

It is still way cheaper than when I started to vape, purchasing replacement coils for the ProTank every 5 days.

We will see how it stacks up against the tried and true Kanthal wire. I am happy to be the VT guinea pig.

I don't rebuild very often, so the high price isn't too big of a turn-off for me. I am still rocking the 26g dual micro coils in my Kraken from early May, which has been my ADV setup for that entire period.

It is still way cheaper than when I started to vape, purchasing replacement coils for the ProTank every 5 days.

We will see how it stacks up against the tried and true Kanthal wire. I am happy to be the VT guinea pig.

Another parallel coil. This time 5 wraps (10 total) at .43 ohms +-.01. I tried out the dragon style wicking. I have fallen in love with the parallel coils. They are my favorite so far.

When I walked into Wal-Mart I was healthy and clean. When I left I was filthy, obese, smelly, and there was a swarm of flies trailing me in my scooter.

I hadn't been in that store for years, and that dang case was the only reason I entered hell's gates.

Is that for your Diabeetus?

Chris is the man, and has created, in my personal opinion, the greatest vapers forum on the net.

Shame, double shame to the vultures, pecking the eyes of our innocence.

Just did some quick searches on Rayon, I'm not sure...

You are welcome 3Rutez

No you cant blame them for shooting any angle they can, I would lol. I still cannot get over the transformation of the VT store. I mean when I first came to the forum it was little more than a side bar if I am being 100% honest and now you have basically everything I use cheaper than I have been paying anywhere else. Kudos my man!